User Manual for imin models including: I21M02, 2AYD5-I21M02, 2AYD5I21M02, 121M02 Mobile POS, Mobile POS
Imin Technology Pte Ltd I21M02 Mobile POS 2AYD5-I21M02 2AYD5I21M02 i21m02
Name And Content Of Toxic And Harmful Substances In This Product Part Name Circuit Board Plastic Toxic or harmful substances and elements Plumbum (Pb) X X Mercury (Hg) Cadmium (Cd ) Chromium VII (Cr(VII)) oP lybrominated Polybrominated biphenyl (Cr(VII)) 0 diphenyl ethers (PBDE) 0: Means that the content of the toxic and harmful substances in all homogeneous materials of the component is below the limit specified in SJ/t113363-2006. X : Means that the content of the toxic and hazardous substances at least in a homogenous material of the component exceeds the limit specified in S/t113363-2006. However, the components marked with"X"in the above table are out of proportion because there is no mature alternative technology in the industry at present. Products that have reached or exceeded the environmental protection service life should be recycled and reused in accordance with the electronic information products control and management measures or local environmental laws and guidelines. They should not be discarded at will or with household waste. Product Warranty Card Model No.: 121M02 Serial No.: Purchase Date: Warranty Period: The warranty period commences on the date of purchase. We offer 365 days warranty service. User Phone: User Address: iMin does not warrant against the following: ·Disassembled or repaired product by unauthorised service provider without our consent. , Damaged product barcode, fragile sticker and altered or defective warranty card. , Damage caused by non-compliance with instructions in this user manual. ·Damage caused by exposure to sources of liquid, dripping or splashing, normal wear and tear, accident or abuse. ·Failure or damage as a result of any Force Majeure Event. ·Expired warranty period. Packing Content Device x 1 ower Adapter x 1, USB Cable x 1 Printing Paper x 1, Ejector Pin x 1 User Manual x 1 Qualification Certificate Passed Inspection Safety Information Safety And Handling ·Please plug-in power adapter to only its corresponding AC socket. ·Do not use in explosive gas atmosphere. ·Do not disassemble the equipment. It should be serviced or recycled only by iMin or an authorised service provider. ·This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic devices. ·About the battery replacement: 1. Do not attempt to replace the battery yourself, you may damage the battery, which could cause overheating, fire and injury. 2. The replaced/ used battery should be disposed according to local environmental laws and guidelines. Do not dispose in fire. It should be serviced or recycled by iMin or an authorised service provider, and must be recycled or disposed of separately from household waste. Company Statement Our company is not responsible for the following actions: ·Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specified in this instruction manual. ·We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products. ·The operating system of this product is supported by official regular OS update. If the user breached the third party's ROM system or change the system file by hacking, it may cause unstable, undesired system operation and bring security risk. Advices ·Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog. ·Do not use the device in extreme cold or hot environments eg, near a fire or lit cigarette. ·Do not topple, throw, or bend. ·Use in optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device. ·Do not attempt to use the device near medical equipment. Important Safety Information ·Do not install or use during thunder storms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit. ·If you find unusual odour, overheating or smoke, please cut off the power immediately. ·Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere. Disclaimer Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specification without prior notice. 11111111111111111111111111111 1 11 1 11 3-06-10-984 imin Intelligence fo Business Mobile POS Model: 121M02 User Manual Designed by iM;n Singapore Address: 11 Bishan Street 21 #03-05 Singapore 573943 TEL: +65 67413019 F+65 67413989 URL: www.imln.sg Rev;ew th;, ""'mao"'I bce "';og the dev;,e. It also coota;os safety ;nfo g,;de, warraoty aod q"'nficaHon certmcaHon. Reta;, these do'"mentafon fo, f,t,ce ,efeceoce FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user's authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. .Adobe Illustrator CS6 (Windows) Adobe PDF library 10.01