Hilti Firestop Putty Stick CP 618

Product Information

The Hilti Firestop Putty Stick CP 618 is for professional use. For detailed application guidance, refer to Hilti product literature, third-party listings, and national approvals.

Operating Temperature: -5°C to 40°C

Key Features: [Building approval], [Waterproof]. Safety: [Eye protection required], [Hand protection required].

[QR Code] available for more details. Visit www.hilti.com, www.hilti.ca, www.hilti.group.

Installation Steps

1. Step 1: Preparation

   Prepare the opening. Avoid extreme temperatures ([Do not use below freezing], [Do not use in high heat]) and liquids ([Do not use with liquids]). Insert the putty stick into the opening around cables.

2. Step 2: Measure Depth

   Insert the putty stick. Measure the required depth 'X' for proper sealing. [Important: Verify depth 'X'].

3. Step 3: Seal Opening

   Apply putty to create a complete seal around cables and the penetration. Ensure the putty fills the void effectively.

4. Step 4: Insert Stick

   Push the putty stick into the opening, filling the space around cables and the penetration.

5. Step 5: Final Seal

   The putty stick is fully inserted, forming a fire-resistant seal. The Hilti Firestop System is complete.