User Guide for Elicks models including: Y3, Y3 Car Bluetooth Audio Receiver, Car Bluetooth Audio Receiver, Bluetooth Audio Receiver, Audio Receiver, Receiver
Shenzhen Elicks Technology Co., Ltd. Y3 Car Bluetooth Audio Receiver 2BLDA-Y3 2BLDAY3 y3
File Info : application/pdf, 1 Pages, 1.22MB
DocumentDocumentCar Bluetooth Audio Receiver *1 *1 *1 Car Bluetooth Audio Receiver Packing list Bluetooth receiver * 1 Instructions *1 Certificate *1 BT-MUSIC HFP/HSP/A2DP/AVRCP 95db 20HZ-20KHZ 10( USB 5V-1A 1.USB3.5 2.AUX 3.BT-MUSIC 4. 3 1.10 2. 3. FCC FCC15 B / CC 20 FCC15 12 Product Parameters Product Name: Car Bluetooth Receiver Bluetooth Name: BT-MUSIC Bluetooth protocol: HFP/HSP/A2DP/AVRCP Signal to noise ratio: 95db Frequency response range: 20HZ-20KHZ Effective distance: 10 meters (unobstruct-ed) Answering the phone: Support Power supply method: USB power supply Working voltage: 5V-1A Instructions 1. Insert the Bluetooth receiver into the USB and 3.5mm ports respectively. 2. Set the car stereo or speaker to AUX line input mode. 3. Open your phone's Bluetooth search and connect to BT-MUSIC. 4. The connection is successful, and the indicator light is constantly on (flashing before connection). Reminder If the connection fails within 3 minutes, please try the following steps: 1. Keep the distance between the Bluetooth receiver and the phone within 10 meters. 2. Re plug and unplug the Bluetooth receiver. 3. Restart the phone. FCCWarning Statement Changes or modifications not expresly approved by the party responsible for complance could void the user's authority to operate theequipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmenigenerates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulnterference to radio communications, However, there is no quarantee that interference wil not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can be determined by tuming the ecuipment of and on, theuser is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The antennas used for this transmiter must be instaled to provide a separation distance of at least 20 cm from all persons and must not beco-located for operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may cause undesired operation. Car Bluetooth Audio ReceiverAdobe PDF library 16.03 Adobe Illustrator(R) 24.0