Jabra Talk 45 - Silver
How do I pair my Jabra Talk 45 with my mobile device?
To pair your Jabra Talk 45 with your smartphone, tablet, or other mobile device, follow these steps.
- Turn on the Bluetooth setting on your mobile device.
- Turn on your Jabra Talk 45 by sliding the On/off switch to the "on" position. Diagram showing a hand sliding the on/off switch on the Jabra Talk 45 headset to the 'on' position.
- To enter pairing mode, press and hold (3 seconds) the Answer/end button until the LED flashes blue. Pairing mode will be announced in the headset. Diagram showing a hand pressing the Answer/end button on the Jabra Talk 45 headset, with the LED flashing blue, indicating pairing mode.
- To pair, go to the Bluetooth menu on your mobile device and select the Jabra Talk 45 from the list of available devices.
Additional Information
Enter “0000” (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with a mobile device.
For more detailed support, visit the Jabra support page: Jabra Talk 45 Support