User Manual for Murata Manufacturing models including: LBCA2HN2AH, VPYLBCA2HN2AH, LBCA2HN2AH Communication Module, Communication Module

05 User Manual

Murata Manufacturing Co., Ltd. LBCA2HN2AH Communication Module VPYLBCA2HN2AH VPYLBCA2HN2AH lbca2hn2ah

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=5201765
Type2AH User Manual for FCC

Model Name: Type2AH

FCC ID: VPYLBCA2HN2AH

Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure)
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the end user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as shown in User manual.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This device complies with below part 15 of the FCC Rules. Part 15 Subpart C
Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module.
The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.

The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 March 2021 1

Type2AH User Manual for FCC

 Antenna list.
Part number AIR-ANT2460P-R S171AH-2450S Internal Trace Antenna

Vendor Cisco Nearson Murata

Peak Gain(dBi) 5.5 6.5 -1.0

Type Patch Dipole Monopole

Connector U.FL U.FL -

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 March 2021 2

Type2AH User Manual for FCC

 The following information must be indicated on the host device of this module.

Contains Transmitter Module FCC ID: VPYLBCA2HN2AH

or Contains FCC ID: VPYLBCA2HN2AH

FCC Compliance Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host device due to the size, please describe in the user's manual and also either describe on the device packaging or on a removable label attached to the device.

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 March 2021 3

Type2AH User Manual for FCC
The following statements must be described on the user manual of the host device of this module;
FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy.  But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person's body.

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 March 2021 4