Company Imprint & Legal Information | Hytronik
iot.koolmesh.com
Instruction Manual for HYTRONIK models including: Bluetooth Receiver Node, HBTD8200V-F, Bluetooth, Receiver, Node
HBTD8200V/F: 0/1-10V receiver nodes / controller unit Hytronik
File Info : application/pdf, 2 Pages, 869.79KB
DocumentDocumentInstallation and Instruction Manual Bluetooth Receiver Node - 1-10V VERSION HBTD8200V/F 1. Technical Specifications Product type Mains voltage Rated load Max. load (0/1-10V) Stand-by power Operation frequency Transmission power Range (Typical) Protocol Operation temperature Case temperature (Max.) Storage temperature Max. relative humidity IP rating Impulse withstand voltage Duty type Insulation material Glow wire Protection Type of switch Insulation EMC standard (EMC) Safety standard (LVD) Radio Equipment (RED) 1-10V Receiver Node (Flush mount) 220~240VAC 50Hz 400VA(Capacitive); 800W(Resistive) 50mA <0.5W 2.4 GHz - 2.483 GHz 4 dBm 10 ~ 30m 5.0 SIG Mesh Ta: -20°C ~ +45°C Tc: +75°C -20°C ~ +60°C 20 ~ 90% IP20 2.5KV S1 PTI material group IIIa level 3, 850°C Built-in protection provide Single load(single-ploe disconnection) Class II EN55015, EN61547, EN61000-3-2, EN61000-3-3 IEC 61058-1, EN 61058-1, IEC 61058-1-2 EN 61058-1-2, AS/NZS 61058.1 EN300 328, EN301489-1, EN301489-17, EN62479 2. Download the App Free App for set-up and commissioning 5.0 SIG mesh iOS Android for iOS for Android Smartphone app for both iOS & Android platform 3. Dimming Interface Operation Notes Switch-Dim The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app. Switch Function Push switch Simulate sensor Action Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid. Double push Long press (1 second) / Descriptions - Turn on/off - Recall a scene - Turn on only - Exit manual mode - Turn off only - Do nothing - Turn on only - Exit manual mode - Turn off only - Do nothing - Recall a scene - Dimming - Colour tuning - Do nothing - Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor 4. Installation Warnings: 1. Installation must be carried out by a qualified engineer in accordance with local regulations. 2. Disconnect power supply before installing. 3. Ensure environmental conditions are suitable for electronic equipment. 1-10V-1-10V+ 58 22 46 L LN S1 S2 for iPad Koolmesh Pro app for iPad Web for Web Web app/platform: www.iot.koolmesh.com Wire Preparation Rising clamp terminal. 0.75 - 4mm 8mm HBTD8200V/F-20200403 -A2 Wiring Diagram 0/1-10V L LED LED N - + 0/1-10V L L N S1 S2 - + 0/1-10V L L N S1 S2 L 0/1-10V LED N LED S1 S2 5. Additional Information / Documents 1.To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions 2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products - Precautions for Product Installation and Operation 3. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensor ->Receiver Nodes 4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy HBTD8200V/F-20200403 -A2