Eufy Indoor Cam 1080p Quick Start Guide

What's Included

• Indoor Cam 1080p
• Mounting Plate
• USB Cable
• USB Adapter
• Mounting Screw Pack
• User Manual

Product Overview

The Eufy Indoor Cam 1080p features several key components:

• ① Microphone: For audio input.
• ② Lens: The camera lens for capturing video.
• ③ Status LED: Indicates the camera's operational status.
• ④ SD card slot: For local storage.
• ⑤ Speaker: For audio output.
• ⑥ SYNC button: Used for pairing and synchronization.
• ⑦ Power input: Port for connecting the power adapter.

Setting Up the System

1. Download the eufy Security app from the [App Store] (iOS devices) or [Google Play] (Android devices).
2. Sign up for a eufy Security account. On the app homepage, tap "Add Device" and add the Indoor Cam to your system.
3. Follow the on-screen instructions to complete the setup.

LED Status

Mounting the Indoor Cam

The camera can be placed on a table, shelf, or mounted on a wall or ceiling. Select a location and height that provides the desired view and is within reach of a power outlet.

Important Precautions:

• Disconnect the Indoor Cam from the power outlet before mounting.
• Keep the Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. This is to avoid infrared reflection, which can negatively impact night vision performance.

Wall Mounting Instructions:

1. Align the positioning card (if provided) and mark the points where drilling will be required on the wall.
2. Drill holes using a 15/64" (6 mm) drill bit.
3. Align the holes on the mounting plate with those on the wall, matching the 'UP' and 'DOWN' orientation.
4. Insert anchors into the holes if the wall is made of hard materials (e.g., concrete, brick, stucco). Fix the screws with a Phillips-head screwdriver to fasten the mounting plate onto the wall.
5. Align the Indoor Cam's mounting slot with the mounting plate and push the camera down until it clicks into place.

Ceiling Mounting:

To mount the Indoor Cam on the ceiling, follow steps 1-4 to secure the camera base onto the mounting plate.

Powering on the Indoor Cam

Connect the Indoor Cam to a power outlet using the provided USB cable and USB adapter. After powering on, the Indoor Cam will connect to the system. A solid blue status LED indicates a successful connection.

Rotate the Indoor Cam to adjust the view by checking the live stream in the eufy Security app. You are now ready to use the Indoor Cam.

For troubleshooting, check the "Help" section within the eufy Security app. Refer to the app for detailed LED indicator status information.

Notices & Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20 cm.

Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Importer (US): POWER MOBILE LIFE, LLC, 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541, Telephone: 1-800-988-7973.

Declaration of Conformity (CE)

This product complies with the radio interference requirements of the European Community.

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit: https://www.eufylife.com/.

This product can be used across EU member states.

Operating Conditions: The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in environments with temperatures too high or too low; never expose the Device to strong sunshine or excessively wet environments. The suitable temperature for T8400 and accessories is 0°C-40°C.

When charging, please place the device in an environment with normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature ranging from 5°C~25°C.

Please ensure to use only the charger offered by the manufacturer. Using an unauthorized charger may cause danger and violate the authorization of the device and the guarantee article.

This charger is for indoor use only. The charger type is TEKA006-0501000EU, output voltage/current is 5Vdc/1A. The plug is considered the disconnect device of the adapter.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20 cm distance between the device and human body.

Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 17.20 dBm. Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power: -4.01 dBm(EIRP).

Importer (EU): Anker Technology (UK) Ltd, Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom.

IC Statement (Canada)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IC RF Statement: When using the product, maintain a distance of 20 cm from the body to ensure compliance with RF exposure requirements.

Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matière d'exposition RF.

Recycling Information

This product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol ♻️ means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.