User Guide for DISTRIBUTEL models including: DISTRIBUTEL, Technicolor, Internet, Modem

Technicolor Internet Modem

Setting up your High Speed Internet Service. www.distributel.ca. Before you begin: > Review contents of your install kit: l A coax cable to connect to the network l An...

Setting up your High Speed Internet Service

Option B: Wireless Router Connecting with a router allows you to connect: l more than one device l wireless devices l devices without an ethernet port Part 2: Connecting your device

Option B: Wireless Router Connecting with a router allows you to connect: l more than one device l wireless devices l devices without an ethernet port Part 2: Connecting your device You should now be ready to enjoy your Distributel High Speed Internet!

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 2 Pages, 754.55KB

Technicolor Internet Modem Set Up Guide

Setting up your High Speed Internet Service

Before you begin:

> Review contents of your install kit: l A coax cable to connect to the network l An ethernet cable to connect your device l Technicolor 4400 modem and power cord

Part 1: Connecting the modem

> Read through instructions You can find additional self-help resources at distributel.ca/support

1 Connect one end of the coax cable to the `Cable' port on your modem, then connect the other end of the cable to a nearby coax wall outlet.

2 Attach the power cord to the `Power' port on your modem and plug into a nearby electrical wall outlet.

3 Turn the modem on, and wait until all lights are on (the LINK light may flicker). This can take about 5 minutes.
To connect your devices see instructions on the reverse side of this guide.

For information on our products and services, visit distributel.ca
Contact our Customer Support team at 1-877-810-2877

Setting up your High Speed Internet Service
Part 2: Connecting your device

Option A: Direct Connection
If you are only connecting to one device, you can connect directly to the modem.
Connect one end of the ethernet cable to the yellow LAN Port `1' on your modem, and the other end to an ethernet LAN port on the device you want to connect.

Option B: Wireless Router
Connecting with a router allows you to connect:
l more than one device l wireless devices l devices without an ethernet port
Connect one end of the ethernet cable to the yellow LAN Port `1' on your modem and the other end to the Internet or WAN port on your router.

It is important (for both options) to connect to LAN Port 1. Do not use LAN Port 2.

For help setting up wireless devices refer to the instruction manual for your router

You should now be ready to enjoy your Distributel High Speed Internet!