Smart Wifi Camera User Manual (iwfcam)
Thanks for choosing our Upgraded small wireless camera. Please follow this manual to set up the camera or click on the purchase link to view the operation video before using the product.
Unpacking Inspection
- Make sure that the package includes: camera, USB-C (or Micro USB) charging cable, instruction manual, *16/32 GB SD card (if included).
- Connect to the computer to confirm that the lens is complete and the battery is in good condition.
I. Product Description
MODEL1-- Build-in Battery:
Slide the switch (ON/OFF key) to turn on the camera. The red light will be on, and the blue light will be flashing.
MODEL2--If no battery:
Connect the camera to power (e.g., a 3.7V-5V/1A-2A power bank, charger, etc.).
RESET:
If you cannot connect the camera (it only supports 2.4G Wi-Fi), please reset the camera successfully, then connect again.
How to Reset:
Press the reset key for about 15-20 seconds until the red and blue lights go out, then light up. This indicates the camera has reset successfully. If the reset is unsuccessful, please try again.
Note:
If the camera cannot be automatically added online after resetting, you need to manually search or scan the QR code of the camera to add it.
Refer to the app interface for guidance. Key functions include searching for the camera by ID and scanning a QR code.
CARD PORT: Insert a Micro SD card to save recordings (Max 128G, not included).
II. APP Settings
1. Download the app "iWFCam"
Scan the QR code to download the APP compatible with your phone system. Options include direct Android APK download, installation from Google Play, iPhone/iPad App Store, and PC Tools Download.
2. Camera-Phone Connection (AP Mode):
Press the on/off key (for built-in battery models) or connect the camera to a 3.7V-5V/1A-2A charger or other power supply and turn it on. The blue light will flash slowly, indicating AP Mode.
Connect to the camera's hotspot (named with BK***, no password) in your phone's WLAN settings. Then, open the "iWFCam" app to connect to your local Wi-Fi (refer to the next point for specific operation steps).
If using Android phones, a "Confirm Connection" prompt will appear. Please keep connecting with the camera.
Note: Camera-phone connection should be completed within 5 meters for a strong signal.
3. Camera-APP Remote Connection (IP Mode)
Start the "iWFCam" app; the camera will automatically be added online.
Click the 'Setting' icon next to the camera in the app to configure Wi-Fi. Choose your router and enter the network password (the camera supports 2.4G Wi-Fi only).
Wait for the camera's update process for remote control. Once it shows "Online", the connection is successful, and the camera's blue light will remain constantly on.
Note: Camera-router connection should be finished within 5 meters for a strong signal.
4. Camera Live-feed Page
Click the camera in the app. A message will pop up to change the password; skip or change it for security.
You can then view the live feed. On this page, you can adjust Brightness, Night Vision, Turn off lights, Video Resolution, Audio, Microphone, Video, and Photo settings.
5. Turn off Lights on the APP
You can turn off all lights via the app. From the video interface, press the third icon to toggle the lights on or off. The red light will go out after 15 seconds.
To turn off the working light, locate and press the designated icon within the app's video interface. This action will extinguish the red light after 15 seconds.
Important Notes and Precautions
Note: Camera should maintain adequate space with other objects for ventilation. Do not cover the shell or surrounding heat sinks when the equipment is powered on or charging to prevent overheating and damage. The manufacturer is not responsible for damage or consequences arising from misuse.
Usage: Strictly adhere to national laws and regulations. Do not use this product for illegal purposes; any consequences are at your own risk.
Working Environment: Optimal working temperature is 0-45°C. For prolonged service life, use at room temperature. Do not cover the shell or heat sink. Working humidity should be 20%-80%. Do not use in humid environments, as the product is not waterproof.
Handling: This product is a precision electronic device. Avoid strong shock and vibration. Do not use it near strong magnetic fields, strong electric fields, or flammable/explosive articles.
Heat: The camera may become warm during operation due to the chip; this is normal.
Support: For any other issues, please contact your local dealers. After-sales mailbox: Cy.chen888@163.com
MADE IN [Country not specified]
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
