User Guide for MEAN WELL models including: HEP-150 Switching Power Supply Harsh Environment, HEP-150, Switching Power Supply Harsh Environment, Power Supply Harsh Environment, Harsh Environment, Environment
HEP-150-48A - Radiomag GmbH HEP-150-48A Hersteller: Mean-Well USA, Inc. AC/DC Power Supply Single-OUT 48V 3.2A 153.6W 5-Pin
File Info : application/pdf, 4 Pages, 577.01KB
DocumentDocument150W Switching Power Supply for Harsh Environment
HEP-150 series
User's Manual
5
IP65 IP68
UL62368-1
TPTC004 IEC62368-1
{ I
File Name:HEP-150-SPEC 2022-08-05
Downloaded from Arrow.com.
H E P - 1 5 0 150W Switching Power Supply for Harsh Environment
series
SPECIFICATION MODEL
HEP-150-12
HEP-150-15
HEP-150-24
HEP-150-36
HEP-150-48
HEP-150-54
DC VOLTAGE
12V
15V
24V
36V
48V
54V
RATED CURRENT
12.5A
10A
6.3A
4.2A
3.2A
2.8A
RATED POWER
150W
150W
151.2W
151.2W
153.6W
151.2W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
200mVp-p
200mVp-p
200mVp-p
VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V
13.5 ~ 17V
22 ~ 27V
33 ~ 40V
43 ~ 53V
49 ~ 58V
OUTPUT
Can be adjusted by internal potentiometer for A type only
CURRENT ADJ. RANGE 7.5 ~ 12.5A
6 ~ 10A
3.8 ~ 6.3A
2.5 ~ 4.2A
VOLTAGE TOLERANCE Note.3 ±2.5%
±2.0%
±1.0%
±1.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±2.0%
±1.5%
±0.5%
±0.5%
1.92 ~ 3.2A ±1.0% ±0.5% ±0.5%
1.68 ~ 2.8A ±1.0% ±0.5% ±0.5%
SETUP, RISE TIME Note.7 1000ms,50ms/115VAC 500ms,50ms/230VAC at full load
HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC
VOLTAGE RANGE Note.4 85~264VAC (277VAC operational) 120~370VDC(390VDC operational)
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load
INPUT EFFICIENCY (Typ.)
91.5%
92%
93%
93.5%
94%
94%
AC CURRENT (Typ.)
1.7A / 115VAC 0.75A / 230VAC
INRUSH CURRENT(Typ.) COLD START 65A at 230VAC
0.7A / 277VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
OVERLOAD
105 ~ 125% Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT PROTECTION
OVER VOLTAGE
Constant current limiting, recovers automatically after fault condition is removed
14 ~ 17V
18 ~ 21V
28 ~ 34V
41 ~ 46V
54 ~ 63V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
59 ~ 65V
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-55 ~ +70 (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -60 ~ +80, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT
±0.03%/ (0 ~ 60)
VIBRATION
20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS Note.6,9
UL62368-1, IEC62368-1,IP65 (or IP68 for HEP-150 Blank type), EAC TP TC 004 approved ; Design refer to BS EN/EN62368-1
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
EMC
EMC EMISSION
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level (surge 6KV), EAC TP TC 020
MTBF
1967.4K hrs min. Telcordia SR-332 (Bellcore) ; 164.2Khrs min. MIL-HDBK-217F (25)
OTHERS NOTE
DIMENSION
228*68*38.8mm (L*W*H)
PACKING
1.15Kg; 12pcs/14.8Kg/0.8CUFT
Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
Downloaded from Arrow.com.
File Name:HEP-150-SPEC 2022-08-05
H E P - 1 5 0 150W Switching Power Supply for Harsh Environment
series
Block Diagram
EMI FILTER
I/P
&
RECTIFIERS
FG
PFC CIRCUIT
POWER SWITCHING
PFC CONTROL
O.L.P. O.T.P.
PWM CONTROL
RECTIFIERS &
FILTER
Fosc : 100KHz
+V -V O.L.P.
DETECTION CIRCUIT
O.V.P.
Derating Curve
Static Characteristics
100 80 60 40 20
-55 -25 -10
0
15
30
50 60
AMBIENT TEMPERATURE ()
70 (HORIZONTAL)
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz
LOAD (%) LOAD (%)
Downloaded from Arrow.com.
File Name:HEP-150-SPEC 2022-08-05
H E P - 1 5 0 150W Switching Power Supply for Harsh Environment
series
Mechanical Specification
A Type: HEP-150-_A(standard model)
FG (Green/Yellow)
AC/L(Brown) AC/N(Blue)
12 9.6 300±20
SJTW 18AWG×3C
228 204
T case
Vo ADJ. 102
9.4 34.2 9.4 68
34
T case: Max. Case Temperature.
Case No.994D Unit:mm
Io ADJ.
300±20
SJTW 14AWG×2C 4.2×4PL
-V(Black) +V(Red)
38.8
IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.)
Blank: HEP-150(optional model)
12 9.6
FG (Green/Yellow)
AC/L(Brown) AC/N(Blue)
300±20 SJTW 18AWG×3C
228 204
T case
102
9.4 34.2 9.4 68
34
T case: Max. Case Temperature.
300±20
SJTW 14AWG×2C 4.2×4PL
-V(Black) +V(Red)
38.8
IP68 rated. Cable for I/O connection.
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
Downloaded from Arrow.com.
File Name:HEP-150-SPEC 2022-08-05