Sun Joe SPX-SC17 Universal Surface Cleaner
Model: SPX-SC17
Specifications: 17-INCH | 4000 PSI MAX PRESSURE | 4.0 GPM MAX FLOW
Form No.: ASP-SPX-SC17-880E-M (Q)
Thank You for Your Purchase!
Please register your product online to activate your 2-year warranty and receive a 90-day bonus coverage. Visit shopjoe.com/register.
Failure to register does not diminish warranty rights. For more information, visit shopjoe.com.
Upgrade your coverage at shopjoe.com/register for up to 3, 4, or 5 years of total tool coverage.
We stand behind our products. If you encounter an issue within the warranty period, we will resolve it.
Customer Feedback & Support
Share your experience: Tell your friends and tag us on social media! Connect with us on:
- Facebook, Instagram, YouTube, TikTok: @SNOWJOECO
- Hashtag: #GOWITHJOE
Need assistance? Our customer service team is ready to help.
- Call Us: 1-866-225-9723
- Chat With Us: shopjoe.com/chat (for fastest response)
Important Safety Instructions
All operators must read these instructions before use.
Safety Alert Definitions:
- ⚠️ WARNING! Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
- ? CAUTION! Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
- ⛔ DANGER! Indicates a hazardous situation, which, if not followed, will result in death or serious injury.
General Safety
- This appliance is not intended for use by children or unsupervised persons. Children should be supervised.
- Inspect the cleaner for defects before use. Contact dealer or customer service if defects are found.
- Read and understand all instructions before use. Failure to follow may result in injury or property damage.
- Always use common sense and caution. Stay alert.
- Do not allow untrained persons to operate or assemble.
- Do not modify the product.
- Use the right tool for the job. Do not force small equipment. Use only as designed.
Work Area Safety
- Inspect the work area: keep it clean, dry, well-lit, and free of clutter. Avoid confined spaces.
- Do not operate near flammable liquids, gases, or dust.
- Keep away from electrical sources. The tool is not insulated.
- Keep children and bystanders at a safe distance.
- Identify and avoid hazards like power lines, electrical circuits, and water pipes.
Personal Safety
- Stay alert and use common sense. Do not use when tired or under the influence.
- Dress appropriately: avoid loose clothing, dangling objects, jewelry. Keep hair, clothing, and gloves away from moving parts.
- Wear appropriate Personal Protective Equipment (PPE): ANSI Z87.1-compliant safety goggles, face shield, dust mask, non-skid shoes, gloves, hearing protection, hard hats, dust collection systems as needed.
- Maintain proper balance and footing. Do not overreach.
- Remove all keys and wrenches before connecting or turning on the tool.
- Secure workpieces with clamps or a vise when possible.
Clear Use and Care
- Do not force the cleaner. Use as designed.
- Inspect the cleaner before each use and connection to a pressure washer. Replace damaged or worn parts immediately.
- Store in a dry, secure location out of reach of children. Inspect before storage and reuse.
- Use only replacement parts recommended by the distributor.
- Never leave the cleaner unattended while pressurized.
- Do not turn the cleaner over when connected to an operating pressure washer.
Specific Operation Warnings
- Do NOT exceed the rated PSI capacity.
- Keep hands, feet, and all body parts away from the nozzle heads and skirt during operation.
- Never lift the machine off the surface or point nozzle heads toward people while operating.
- Always wear appropriate safety gear, including ANSI Z87.1-approved safety glasses.
- Operate only on hard, level surfaces.
- Do NOT modify or alter the product.
- Use only manufacturer-supplied attachments and adapters.
- This product is not intended for use by or around children.
Safety Symbols
The following table describes safety symbols:
Symbol | Description |
---|---|
⚠️ | SAFETY ALERT – Indicates a precaution, a warning or a danger. |
[injection-hazard-icon] | Risk of injection and serious injury. Keep hands and feet clear of the deck while the pressure washer is operating. |
[eye-protection-icon] | Wear eye and ear protection. |
[high-pressure-warning-icon] | WARNING! High-pressure fluid from this equipment can penetrate the skin and underlying tissue, causing serious injury and possible amputation. |
[read-manual-icon] | READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all instructions in the user manual(s) before attempting to assemble and operate. |
Know Your Surface Cleaner
Familiarize yourself with the controls and adjustments by comparing the diagram below to your surface cleaner.
- 1. Quick connect inlet plug
- 2. Manifold body
- 3. Spray lance
- 4. Extension wand
- 5. Nut
- 6. Wheel support bracket
- 7. Stainless steel shroud
- 8. Caster wheel
- 9. Splash-control skirt
- 10. Large O-ring
- 11. Small O-ring
- 12. Teflon tape
- 13. Nozzle cleaner
Technical Data
- Max Pressure: 4000 PSI
- Product Dimension: 17.5 in. x 6.3 in. x 17.5 in. (44.5 cm x 16 cm x 44.5 cm)
- Max Flow Rate: 4.0 GPM (15 l/min)
- Max Temperature: 300 °F (149 °C)
- Extension Wand Length: 15.9 in. (40.5 cm)
- Wheel Size: 1.9 in. (4.8 cm)
- Net Weight: 9.7 lbs (4.4 kg)
Unpacking
Carton Contents:
- Pressure washer extension wand X 2
- Pressure washer surface cleaner
- Replacement nozzles X 2
- Teflon tape
- Large O-rings X 2
- Small O-rings X 2
- Nozzle cleaner
- Manual
Important Notes:
- Carefully remove and check all items.
- Inspect for damage during shipping. If damaged or missing parts, call 1-866-225-9723. Do not return to store.
- Do not discard shipping carton/packaging until ready to use. Dispose of properly.
- IMPORTANT! Equipment and packaging are not toys. Keep away from children.
Preparation + Operation
Set-Up
- Pull back collar on quick-connect end of wand.
- Push the surface cleaner into place.
- Push collar forward, insert surface cleaner, and release collar. Ensure collar slides fully forward. Tug to confirm secure fit.
- 1. Spray Wand
- 2. Surface Cleaner
Surface Preparation
- Clear loose debris from the area to be cleaned.
- Never clean surfaces with protruding objects. Striking obstacles can damage the machine. If vibration occurs, stop and check the spray bar.
Start-Up
- Ensure all connections are tight and secure.
- Unlock the trigger gun and squeeze while starting the pressure washer.
- Water will flow from nozzles. Ensure nozzles are clear and spray pattern is consistent.
- Walk slowly behind the unit. If striping appears, reduce speed. Do not leave the machine stationary on soft surfaces.
Shut Down
- Turn the pressure washer off.
- Turn the water supply off.
- Press the trigger gun to release built-up water pressure.
- Disconnect the handle, wipe down the unit, and store in a dry location.
After Each Use
- Clean dirt/foreign material from under the housing and casters.
- Wash and rinse the surface cleaner with tap water if necessary.
- Check for loose parts and damage.
Nozzle Cleaning + Replacement
Disconnect the pressure washer before this procedure.
- Use the appropriate wrench (11 mm) to remove the nozzle.
- Rinse nozzle holes with clean water.
- Wrap nozzle threads with the included Teflon tape.
- Align nozzle openings and reinstall onto the spray bar. Tighten securely.
NOTE: If the nozzle is difficult to remove, heat it with a hot blower before removal.
- 1. Nozzle removal (11 mm wrench)
- 2. Rinsing nozzle holes
- 3. Wrapping threads with Teflon tape
- 4. Reinstalling nozzle
Pivot Maintenance
If the pivot connection leaks, replace the O-rings.
- Remove the screw from the body using a 5 mm hex wrench.
- Replace the damaged O-ring with new ones.
- Reinstall the screw using a 5 mm hex wrench.
- Dispose of O-rings according to local regulations. Do not place in curbside recycling; take to landfills.
- 1. Removing screw
- 2. Replacing O-ring
- 3. Reinstalling screw
Troubleshooting
Problem | Probable Cause | Corrective Action |
---|---|---|
Missing parts | Damaged package | Contact All Season Power Customer Service at 1-866-225-9723. |
Inadequate cleaning power | Not enough PSI from pressure washer | Ensure the unit operates with a minimum pressure of 1500 PSI. |
Nozzle blocked or damaged | Clean or replace the nozzles. | |
Spray bar does not rotate | Defective, snap ring dislodged | DO NOT USE! Contact All Season Power Customer Service at 1-866-225-9723. |
Unstable connection + spray ball fell off | DO NOT USE! Contact All Season Power Customer Service at 1-866-225-9723. | |
Seal malfunction: water is spraying from the swivel | DO NOT USE! Contact All Season Power Customer Service at 1-866-225-9723. | |
Excessive vibration of surface cleaner | Nozzle clogged | Clean or replace the nozzles. |
Streaked cleaning pattern | Nozzle clogged | Clean or replace the nozzles. |
Cleaning too fast | Clean or replace the nozzles. | |
Top leaks | The O-ring is damaged | Refer to page 7. |
Service and Support
For service or maintenance, call the All Season Power customer service center at 1-866-225-9723.
Model and Serial Numbers
When contacting the company, provide model and serial numbers found on the unit's decal. Record them below:
Model #: SPX-SC17
Serial #: [Input field for Serial Number]
Optional Accessories
WARNING! ALWAYS use only authorized Snow Joe® + Sun Joe® replacement parts and accessories. NEVER use parts or accessories not intended for this universal surface cleaner. Contact All Season Power if unsure. Use of other attachments can be dangerous.
Accessories | Item | Model |
---|---|---|
[Accessory Bottles Image] | Sun Joe® House + Deck All-Purpose Pressure Washer Rated Concentrated Cleaner | SPX-HDC1G |
Sun Joe® Premium Snow Foam Pressure Washer Rated Car Wash Soap + Cleaner | SPX-FCS1G | |
Sun Joe® All-Purpose Heavy Duty Pressure Washer Rated Cleaner + Degreaser | SPX-APC1G |
Shop the complete line of accessories and attachments online at shopjoe.com.
NOTE: Accessories are subject to change. Order online at shopjoe.com or by phone at 1-866-225-9723.
Our Customer Promise + Limited Warranty
All Season Power is dedicated to providing a positive customer experience. This document outlines the Limited Warranty for our products.
Our Warranty:
All Season Power warrants new products to be free from defects in material or workmanship for two years from the date of purchase for ordinary household use. This warranty does not cover products purchased from unauthorized sellers.
If a product or part is defective, All Season Power will elect to: (1) send a free replacement part, (2) replace the product, or (3) repair the product.
Product Registration:
Register your product online at shopjoe.com/register, via chat at shopjoe.com/support, or by calling 1-866-225-9723. Registration is encouraged but does not affect warranty rights.
Who Can Seek Limited Warranty Coverage:
This warranty extends to the original purchaser and owner.
What Is Not Covered?
This warranty does not apply to commercial or rental use, products from unauthorized sellers, or cosmetic changes that do not affect performance. Wear parts (belts, augers, chains, tines) are not covered.
We encourage the use of CERTIFIED AUTHENTIC Snow Joe®, Sun Joe®, Aqua Joe® + Auto Joe® replacement parts and accessories. Damage from non-authorized parts is not covered.
Registering your product may provide an additional 90 days of warranty coverage. Extended warranty options are available through Extend, Inc.
Disclaimers: Implied warranties are limited in duration. All Season Power is not liable for special, incidental, or consequential damages.