BOYA Magic AI-Powered Wireless Microphone System User Manual
Introduction and Safety
This manual provides instructions for operating and storing the BOYA Magic wireless microphone system. Please read it carefully before use and keep it for future reference. For issues not covered, contact your retailer or support@boya-mic.com.
Precautions:
- Do not disassemble the unit.
- Keep away from heat sources like heaters or spotlights.
- The battery is not user-replaceable.
- Clean the unit with a soft, dry cloth.
- Avoid dust and humidity during use and storage.
- Do not touch the microphone head to ensure optimal sound capture.
Overview
The BOYA Magic is a versatile 2.4GHz wireless microphone system. It features a lightweight, compact transmitter and a charging case that also serves for storage and can be used as a handheld microphone. With the optional BOYA Desktop Stand, it can function as a desktop microphone, catering to various scenarios. Its simple operation makes it ideal for content creation, live broadcasting, vlogging, and mobile news gathering.
The BOYA Magic series offers receivers with USB-C, Lightning, and 3.5mm TRS connectors, ensuring broad compatibility with smartphones, tablets, and cameras. The receivers feature a USB-C charging port, allowing mobile devices to be charged while recording. Each transmitter provides up to 6 hours of continuous use, extendable to 30 hours with the charging case. The charging case also functions as a portable power source for the transmitters, easily solving power needs on the go.
Features
- Innovative 4-form factor design for flexible use.
- True AI noise reduction, achieving up to 40dB noise reduction.
- Ultra-thin 13mm body, weighing only 7g for zero-feel wear.
- Supports 48 kHz 24-bit audio resolution.
- Frequency response from 20 Hz to 20 kHz.
- Includes limiter, safety track, and smart pop-noise suppression.
- Transmitter offers 6 hours of continuous operation, with a total of 30 hours using the charging case.
Product Composition
Transmitter (BOYA Magic-TX)
The transmitter is a compact device with the following key components:
- 1. Power/Pairing Button: Used for turning the device on/off and initiating pairing.
- 2. Mute Button: Toggles mute function or noise reduction.
- 3. USB-C Charging Port: For charging the transmitter.
- 4. Microphone Head: The primary audio input.
- 5. Charging Contacts: Connects to the charging case or dock.
- 6. Windscreen/Furry Windshield: Attachable accessory for reducing wind noise.
Transmitter Status Indicator Lights:
| Status | Indicator Light |
|---|---|
| Not Connected | Blue light blinking slowly |
| Pairing | Blue light blinking rapidly |
| Connection Successful | Blue light solid |
| Mute On | Red light blinking slowly |
| Noise Reduction On | Green light solid |
| Low Battery Warning | Red light blinking rapidly |
| Charging | Red light solid |
| Firmware Update | Red and Green lights alternating |
Notes on Transmitter: Pairing mode lasts for 5 minutes. If the battery level is low, the transmitter will automatically power off within 10 minutes.
Receivers
USB-C Receiver (BOYA Magic-RXU)
This receiver connects via USB-C to compatible devices.
- 1. USB-C Connector: Plugs into the USB-C port of smartphones, tablets, or computers.
- 2. TX1, TX2 Status Indicator Lights: Indicate the connection status with transmitters.
- 3. Power Button: Used for pairing and controlling noise reduction/mute functions.
- 4. USB-C Charging Port: Allows charging of the connected mobile device using a USB-C to USB-A cable.
Lightning Receiver (BOYA Magic-RXD)
This receiver connects via Lightning to compatible Apple devices.
- 1. Lightning Connector: Plugs into the Lightning port of iPhones or iPads.
- 2. TX1, TX2 Status Indicator Lights: Indicate the connection status with transmitters.
- 3. Power Button: Used for pairing and controlling noise reduction/mute functions.
- 4. USB-C Charging Port: Allows charging of the connected mobile device using a USB-C to USB-A cable.
3.5mm TRS Receiver (BOYA Magic-RX)
This receiver connects via a 3.5mm TRS cable to cameras and other audio equipment.
- 1. TX1, TX2 Status Indicator Lights: Indicate the connection status with transmitters.
- 2. Power Button: Used for pairing and controlling noise reduction/mute functions.
- 3. USB-C Charging Port: For charging the receiver itself.
- 4. 3.5mm TRS Audio Output Terminal: Outputs audio to cameras or mixers.
- 5. Volume Indicator Lights: Show the current audio output level.
- 6. Volume Keys: Adjust the audio output level.
- 7. Back Clip: Attaches the receiver to a camera's hot shoe or other mounting points.
Notes on Receiver Status Lights: The indicator lights correspond to the connected transmitters (TX1 and TX2). If only one transmitter is connected, only the corresponding light will be active. When the receiver enters pairing mode, its status light will blink blue rapidly for 5 minutes. If pairing is not completed within this time, the receiver will exit pairing mode, and the light will return to a slow blue blink.
Charging Case (BOYA Magic-CC)
The charging case stores and charges the transmitters.
- 1. TX1 Status Indicator Light: Shows connection status for transmitter 1.
- 2. Receiver Storage Slot: Compartment for storing USB-C or Lightning receivers.
- 3. Sound Hole: Collects external sound when the case is used as a handheld or desktop microphone.
- 4. Charging Contacts: Connects to the transmitter's charging contacts.
- 5. USB-C Charging Port: For charging the charging case itself.
- 6. Battery Indicator Lights: Display the charging case's battery level.
- 7. 1/4" Screw Hole: Located on the bottom for mounting to the BOYA Desktop Stand.
- 8. Wind Sponge & 9. Windproof Hood: Accessories for reducing wind noise, attachable to the transmitter.
Charging Case Battery Level Indicator:
| Battery Level | Indicator Lights (Example: ○ = Off, ● = On, ◌ = Blinking) |
|---|---|
| 0-10% | ◌ ● ● |
| <25% | ◌ ◌ ● |
| 25%-49% | ◌ ◌ ◌ |
| 50%-74% | ◌ ◌ ◌ |
| 75%-99% | ◌ ◌ ◌ |
| 100% | ◌ ◌ ◌ |
Note: If the charging case battery is below 10%, it cannot charge the transmitters. When the charging case is connected to power and charging, the indicator lights show the charging status.
Desktop Stand (BOYA Desktop Stand)
This accessory is sold separately and allows for desktop microphone placement.
- 1. Upper 1/4" Screw Hole, Lower Cold Shoe Port: Versatile mounting options.
- 2. Rotating Cold Shoe Port: For attaching the receiver's back clip.
- 3. 3/8" Screw Hole: Connects to standard microphone stands or arms.
- 4. One-button Lever: Adjusts the pan and tilt angle of the microphone.
- 5. 1/4" Cold Shoe Port Base: Mounts to camera hot shoes or tripods.
- 6. Tripod Legs: Provide a stable base for desktop use.
Microphone Charging Dock
A separate dock used for charging microphones, featuring charging contacts.
Operation Guide
Transmitter and Receiver Pairing
- Transmitters automatically power on when removed from the charging case.
- Insert the USB-C or Lightning receiver into the corresponding port on your mobile device.
- The transmitters and receivers are pre-paired at the factory. They will connect automatically when powered on. Successful connection is indicated by solid blue lights on both devices.
- If pairing fails:
- With the transmitter powered off, long-press the power button for 5 seconds until the indicator light blinks blue rapidly, entering pairing mode.
- With the receiver powered off, long-press its power button for 5 seconds until its indicator light blinks blue rapidly, entering pairing mode.
- Once pairing is successful, both the transmitter and receiver indicator lights will remain solid blue.
Charging Case and Receiver Pairing
- Long-press the charging case power button for 2 seconds to activate the transmitter (TX1). Insert the USB-C or Lightning receiver into your mobile device.
- The devices are pre-paired and will connect automatically. Successful connection is indicated by solid blue lights on the charging case's TX1 indicator and the receiver.
- If automatic connection fails, remove the transmitter from the charging case's first slot and pair it following the "Transmitter and Receiver Pairing" procedure. After successful pairing, return TX1 to the charging case and power it on. This enables handheld microphone use or desktop microphone use with the BOYA Desktop Stand.
Using as Handheld Microphone
The transmitter can be held directly for recording.
Using as Desktop Microphone
The transmitter can be mounted on the BOYA Desktop Stand or a standard tripod.
Transmitter Attachment
- For clear audio recording in windy outdoor environments, it is recommended to attach the windproof hood or wind sponge to the transmitter or charging case.
- The transmitter can be clipped onto clothing using the magnetic adsorption back clip, or attached using the magnetic sheet.
Connecting to Devices
Connecting to Mobile Devices
- Insert the USB-C or Lightning receiver into the appropriate port on your smartphone or tablet.
- Launch the BOYA Central app or another compatible application to record audio and video. If the application supports external microphones, select the BOYA Magic as the input device.
Diagrams: Illustrate connection of USB-C receiver to a laptop/tablet/phone and Lightning receiver to an iPhone.
Connecting to Cameras
Use a 3.5mm TRS audio cable to connect the receiver's 3.5mm TRS audio output to a camera or mixer. This transfers the recorded audio from the transmitter to the connected device.
Diagram: Shows the 3.5mm TRS receiver connected to a camera's microphone input via a 3.5mm TRS to TRS cable.
Tips and Cautions
Tips:
- It is recommended to perform a simple recording test before actual recording to ensure audio levels are within the acceptable range.
- In noisy environments, short-press the power button on the transmitter or charging case to enable the noise reduction function for improved recording quality. The noise reduction function for both transmitters operates simultaneously (either on or off together).
- After finishing recording, place the product back into the charging case for charging and storage.
Caution:
The 2.4GHz band is susceptible to signal interference. To minimize this, avoid obstacles such as walls and buildings, and stay away from high-power Wi-Fi antennas or radios operating in the 2.4GHz band.
App Information
Download the "BOYA Central" app by scanning the QR code or searching in your app store. Connecting the BOYA Magic via the Lightning or USB-C receiver to your smartphone allows you to check battery levels and input levels, adjust microphone gain, noise reduction, and recording modes, and perform firmware upgrades for an enhanced audio experience.
Note: Supports iOS 15.6 or later, and Android 7.0 or later.
Troubleshooting
If you encounter issues with the product, please refer to the following solutions. If problems persist, contact your local dealer's after-sales service department.
Transmitter Cannot Pair with Receiver
- For Lightning or USB-C Receivers: Ensure the transmitter is powered off. Connect the receiver to your mobile device.
- For 3.5mm TRS Receivers: Ensure both the transmitter and receiver are powered off.
- After ensuring both are off, long-press the power buttons of both the transmitter and receiver simultaneously for approximately 5 seconds. Release when the indicators blink blue rapidly, then attempt pairing again.
Charging Case Cannot Pair with Receiver
- When using the charging case as a handheld or desktop microphone, ensure the microphone is inserted into the first slot.
- If pairing still fails despite the microphone being in the first slot, remove the microphone and follow the steps in "Transmitter and Receiver Pairing" to re-pair it.
Limited Range, Sound Changes, or Noise Issues
- ① Verify that there is no interference from high-power wireless routers or devices in your current environment. If interference is unavoidable, try to find an optimal distance and angle.
- ② The 2.4GHz band is prone to signal interference. Avoid obstacles like walls and buildings, and stay away from high-power Wi-Fi antennas or radios operating in the 2.4GHz band.
- ③ Check if the receiver is loose; if so, remove and re-insert it.
Device Does Not Power On
- Check if the battery is depleted due to prolonged non-use and charge the device.
Charging Case Cannot Charge Transmitter
- ① Charge the charging case to rule out battery depletion as the cause.
- ② Check if the charging contacts are properly connected. Clean the contacts with a clean cloth and try again.
- ③ Check for magnetic degradation or poor charging contact. Press the transmitter firmly against the charging contacts to ensure it engages. If charging still fails, contact customer service.
Specifications
Transmitter (BOYA Magic-TX)
| Parameter | Specification |
|---|---|
| Transmission Method | 2.4GHz Digital Band |
| Transmission Distance | 100m (no obstacles) / 10m (with obstacles) |
| Modulation | GFSK |
| Polar Pattern | Omnidirectional |
| Antenna Type | LDS |
| RF Output Power | <10 dBm |
| Distortion | ≤0.1% |
| Max SPL | ≥115 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | -33.5 dB |
| Reference Audio Input Level | -20 to -42 dBu (MIC input, 0 dB gain) |
| Audio Input | Built-in condenser microphone |
| Power Supply | Built-in lithium battery |
| Sampling Rate | 48 kHz |
| Bit Depth | 24 bit |
| Signal-to-Noise Ratio | ≥80 dB |
| Battery Capacity | 90mAh |
| Continuous Operation Time | ≥6 hours |
| Charging Time | ≤2 hours |
| Weight | 7g |
| Dimensions | 35×15.2×13mm |
| Charging Temperature | 0°C - 45°C |
| Operating Temperature | 0°C - 45°C |
| Storage Temperature | -20°C - 55°C |
USB-C Receiver / Lightning Receiver (BOYA Magic-RXU/RXD)
| Parameter | Specification |
|---|---|
| Transmission Method | 2.4GHz Digital Band |
| Transmission Distance | 100m (no obstacles) / 10m (with obstacles) |
| Modulation | GFSK |
| Antenna Type | Ceramic Antenna |
| Distortion | ≤0.1% |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | ≥80 dB |
| Power Supply | External device power supply |
| Weight | 5g |
| Dimensions | 19.55×24×21mm |
| Operating Temperature | 0°C - 45°C |
| Storage Temperature | -20°C - 55°C |
3.5mm TRS Receiver (BOYA Magic-RX)
| Parameter | Specification |
|---|---|
| Transmission Method | 2.4GHz Digital Band |
| Transmission Distance | 100m (no obstacles) / 10m (with obstacles) |
| Modulation | GFSK |
| Antenna Type | Ceramic Antenna |
| Distortion | ≤0.1% |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | ≥80 dB |
| Audio Output | 3.5mm TRS analog output |
| Power Supply | Built-in lithium battery |
| Battery Capacity | 200mAh |
| Continuous Operation Time | ≥6 hours |
| Charging Time | ≤2 hours |
| Weight | 16g |
| Dimensions | 42.2×30×19.4mm |
| Operating Temperature | 0°C - 45°C |
| Storage Temperature | -20°C - 55°C |
Charging Case (BOYA Magic-CC)
| Parameter | Specification |
|---|---|
| Battery Type | Built-in lithium battery |
| Battery Capacity | 500mAh |
| Charging Method | USB-C Port |
| Charging Time | Approx. 2 hours (5V/2A) |
| Charging Cycles | 1.5 times (for 2 transmitters) |
| Weight | 62.5g |
| Dimensions | 141.3×26.5×21mm |
| Charging Temperature | 0°C - 45°C |
| Operating Temperature | 0°C - 45°C |
| Storage Temperature | -20°C - 55°C |
Packing List
The following lists detail the contents for various BOYA Magic kits:
BOYA Magic-01
- Transmitter ×2
- USB-C Receiver ×1
- Lightning Receiver ×1
- 3.5mm TRS Receiver ×1
- Charging Case ×1
- Magnetic Adsorption Sheet ×2
- BOYA Desktop Stand ×1
- Transmitter Windjammer ×2
- Charging Case Windjammer ×1
- Charging Case Windscreen ×1
- 3.5mm TRS to TRS Audio Cable ×1
- USB-C to USB-A Data Cable ×1
- USB-C to USB-C Data Cable ×1
- All-in-one Storage Bag ×1
BOYA Magic-02
- Transmitter ×2
- USB-C Receiver ×1
- Lightning Receiver ×1
- 3.5mm TRS Receiver ×1
- Charging Case ×1
- Magnetic Adsorption Sheet ×2
- Transmitter Windjammer ×2
- Charging Case Windjammer ×1
- Charging Case Windscreen ×1
- 3.5mm TRS to TRS Audio Cable ×1
- USB-C to USB-A Data Cable ×1
- USB-C to USB-C Data Cable ×1
- All-in-one Storage Bag ×1
BOYA Magic-03
- Transmitter ×2
- USB-C Receiver ×1
- 3.5mm TRS Receiver ×1
- Charging Case ×1
- Magnetic Adsorption Sheet ×2
- Transmitter Windjammer ×2
- Charging Case Windjammer ×1
- Charging Case Windscreen ×1
- USB-C to USB-A Data Cable ×1
- Storage Bag ×1
BOYA Magic-04
- Transmitter ×2
- USB-C Receiver ×1
- Lightning Receiver ×1
- Charging Case ×1
- 3.5mm TRS to TRS Audio Cable ×1
- Magnetic Adsorption Sheet ×2
- USB-C to USB-A Data Cable ×1
- USB-C to USB-C Data Cable ×1
- Storage Bag ×1
BOYA Magic-05
- Transmitter ×2
- USB-C Receiver ×1
- Charging Case ×1
- Magnetic Adsorption Sheet ×2
- Transmitter Windjammer ×2
- Charging Case Windjammer ×1
- Charging Case Windscreen ×1
- USB-C to USB-A Data Cable ×1
- Storage Bag ×1
BOYA Magic-06
- Transmitter ×2
- USB-C Receiver ×1
- Magnetic Adsorption Sheet ×2
- Transmitter Windjammer ×2
- Carrying Pouch ×1
- Microphone Charging Dock ×2
BOYA Magic-07
- Transmitter ×1
- USB-C Receiver ×1
- Charging Case ×1
- Magnetic Adsorption Sheet ×1
- Transmitter Windjammer ×1
- Charging Case Windjammer ×1
- Charging Case Windscreen ×1
- USB-C to USB-A Data Cable ×1
- Storage Bag ×1
BOYA Magic-08
- Transmitter ×1
- USB-C Receiver ×1
- Magnetic Adsorption Sheet ×1
- Transmitter Windjammer ×1
- Carrying Pouch ×1
- Microphone Charging Dock ×1
