Rebotec Australia
One moment, please...
Instructions for REBOTEC models including: Rollators and Walkers
instructions of the particular user manual. Advisory on other documents At our www.rebotec.de website you can download the User Instructions booklets, forms and other information. Maintenance protocol No.: Product information / Rollator, Walker (medical product class I) REBB02.11.149-17-06. Product Serial no. Year of ...
File Info : application/pdf, 4 Pages, 642.89KB
DocumentDocument40 GB WA-No.: 02.11.149/2017-06 REBOTEC® Rehabilitationsmittel GmbH PO Box Q541 Queen Victoria Building NSW 1230 rebotec.com.au info@rebotec.com.au Maintenance Instructions Rollators and Walkers Images show a selection of rollators and walkers Important advisory! Store the maintenance inspection reports carefully. This will allow you to keep an overview of the product's maintenance status. REBOTEC / WA-No: 02.11.152/2017-06 GB Maintenance of the rollator and walker 1.1 Maintenance / inspection requirements In this maintenance instructions pamphlet you'll find information and advisories on the safe and professional maintenance and/or repair work on rollator and walker. The products are Class I medical products as to the 93/42/EEC and the German MPG/Medical Products Act. As to the requirements of the German MPBetreibV Medical Products Ordinance, the products must be maintained and the hygiene requirements must be adhered to. Check your local requirements. The product's lifetime is in large part affected by how it is used. The frequency of use and manner of use reduces the lifetime as does improper handling and inadequate maintenance. In order to ensure safe use, a visual inspection and function check must be done at least once per year. Shorter time intervals between maintenance may be necessary when the frequency of use or the condition of the product exists due to safety reasons. The operator has to carry out the maintenance on his own or must instruct a competent person (specialized supplier, medical supply store or a medical-maintenance-service) if he has not the needed expertise. Inspection results must be documented and be confirmed by a signature. The product it is recommended with an inspection sticker that states the next inspection. The product operator is responsible for assuring regularly-conducted inspections. 1.2 Maintenance scope The product's inspection extends from the general condition to the individual components, function and safety. Necessary repair wroks must be done without delay. If an immediate repair work is not possible, then it is in the patient's interest and health to put the product out of service. 1.3 Maintenance advisories When making repairs, use only original spare parts from REBOTEC. Do not undertake any modifications or conversions to the product on your own. These will adversely impact the product's safety and function. REBOTEC accepts no liability in such cases. When performing maintenance and repairs, please use the product's User Instructions booklet as an aid and follow the instructions concerning proper use, re-use, lifetime, guarantee, care and maintenance. After completing maintenance or repair work on the product, follow the requirements for hygiene for re-use. 1.4 Maintenance reports and overview In the appendix you will find a form for documenting maintenance. You can make copies of the form. This allows you to keep an overview of the product's maintenance status. Maintenance protocol (single report) It is a form for proof of a single maintenance session. Maintenance overview (total report) It is a form for proof of executed maintenance sessions. 1.5 Disposal For disposing of the product, follow all the advisories in the product's User Instructions booklet. Disposal must be done at a recycling company. Contact your local recycling company for more information. 1.6 Transport and storage For transporting or storing the product follow the instructions of the particular user manual. Advisory on other documents At our www.rebotec.de website you can download the User Instructions booklets, forms and other information. Maintenance protocol No.: Product information / Rollator, Walker (medical product class I) Product Serial no. Year of Use Manufacturer User Location of Maintenance- General Condition P Checks Scope of work 1. Visual inspection General damage, wear and corrosion 2. Connection elements Completeness, seat, function (screws, nuts, etc.) 3. Functions Folding mechanism Height adjustment Brake (permanent lock/normal brake) Remarks Maintenance- Component checking P Article Scope of work Remarks 1. rollator frame Damages 2. grip bow Function, fastening 3. swivel castors Function, damage, wear 4. brake wheels Function, damage, wear 5. brake levers Function, damage, wear 6. hand switch Function, damage, wear 7. wood seat Stability, damage, wear 8. cushion Damage 9. accessory Function, wear 10. YANO-support Function, fastening 11. YANO-handle Function, damage, wear 12. Castor brakes Function, damage, wear 13. YANO-accessory Function, damage, wear * Findings: I=inspected; E=exchanged' R=repaired, i.o. = in order; n.i.o. = not in order The following parts were replaced: (Use only original parts from the manufacturer) Qty. Article description REBB02.11.149-17-06 Finding* Finding * Maintenance results / summary Visual check i.O. n.i.O Function check Cleaning carried out yes no Next maintenance: i.O. n.i.O Passed Disposal carried out yes no yes no Date Signature/maintenance company Signature/customer Maintenance overview Product information / Rollator, Walker (medical product class I) Product Serial no. Year manuf. Manufacturer User Location of use Inventory no. Use start REB02.11.149-17-06 1st Maintenance Date Maintenance company Report Signature Remarks: 2nd Maintenance Date Maintenance company Remarks: Report Signature 3rd Maintenance Date Maintenance company Remarks: Report Signature 4th Maintenance Date Maintenance company Remarks: Report Signature 5th Maintenance Date Maintenance company Remarks: Report Signature