Logi Zone Vibe 100 Wireless Headphones

Know Your Product

Front View

The front view shows the overall design of the headphones. Key visible components include the Microphone boom extending from one earcup.

Back View

The back view reveals the controls on the earcups. These include the Call button (used for answering, ending, or rejecting calls) and the Volume up / down buttons. A Music control button (for play/pause and next track) is also located on one earcup.

Bottom View

The bottom view highlights the connectivity and power options. It features a 3-position switch for power and Bluetooth® pairing, a Mute button, the USB-C port for charging, and an LED light indicator.

Box Content

• Zone Vibe 100 wireless headphones
• Charging cable
• Travel bag
• User documentation

Power On / Off

1. Slide the 3-position switch in the indicated direction to the middle position to power on the headphones.
2. Upon powering on, the LED light will briefly turn white.
3. A voice prompt will announce the battery status.

Connect via Bluetooth®

1. Slide the 3-position switch to the bottom position for 2 seconds to initiate pairing mode.
2. The LED light will flash white rapidly.
3. On your device, open the Bluetooth® settings.
4. Select "Logi Zone Vibe 100" from the list of discoverable devices.
5. Once successfully paired, the LED light will turn solid white.

Adjusting Headphones

1. Adjust the headphones by sliding the earcups up and down the extended part of the headband.
2. For optimal comfort, it is recommended to adjust the headphones while wearing them. Slide the earcups until they sit comfortably on your ears.

Headphones Controls

Controls for Call, Music, Volume, and Connectivity:

Note: Media control functionality may vary depending on the application. Call activities always have priority. When two Bluetooth® devices are connected, the last active device will override the other.

Tip: Music EQ controls are available on Logi Tune.

Mute Functionality

There are two ways to mute your microphone:

• Press the dedicated Mute button.
• Flip the microphone boom up or down.

Voice notifications will indicate when the microphone is muted or unmuted.

Headphones Light Indicator

The LED light provides status information:

Note: User-triggered actions, such as Bluetooth® pairing, take priority and will revert to the previous status once completed.

Charging

To conserve battery life, headphones automatically power off after 30 minutes of inactivity. The sleep timer can be adjusted in Logi Tune. The LED light will blink slowly in RED when the battery is low.

Charging via USB Cable

1. Connect one end of the USB-C cable to the port on the bottom of the earcup and the other end to a USB-C charging port on your computer or power adapter.
2. The LED light will start breathing white while charging.
3. The LED light will turn solid white when fully charged.

A full charge takes approximately 2 hours. A 5-minute charge provides about 1 hour of playback. The headphones can be used while connected via Bluetooth® and charging.

Logi Tune

Logi Tune enhances your headphones' performance with periodic software and firmware updates. It is recommended to keep your headphones updated.

To download Logi Tune, visit: www.logitech.com/tune

Adjusting Sidetone

Sidetone allows you to hear your own voice during conversations, helping you manage speaking volume. In Logi Tune, select the sidetone feature and adjust the dial. A higher setting means you hear more external sound, while a lower setting means you hear less external sound.

Auto Sleep Timer

By default, your headphones automatically power off after 30 minutes of inactivity. You can adjust this sleep timer in Logi Tune. To wake up the headphones, slide the power switch off and then on again.

Reset Your Headphones

1. Ensure the headphones are powered on.
2. Press and hold both the Call button and the volume '-' button simultaneously for 5 seconds.
3. The LED light will blink rapidly from red to white three times and then turn off, indicating a successful reset.
4. The headphones will power off automatically after the reset process.

Specifications

Dimensions

• Headphones: Height x Width x Depth: 183.03 x 169.68 x 73 mm, Weight: 0.185 Kg
• Earpad: Height x Width x Depth: 98.6 x 75.44 x 19.3 mm

System Requirements

Works with common calling applications across most platforms and operating systems. Compatible with Windows, Mac, or Chrome-based computers via Bluetooth® and iOS or Android Bluetooth-enabled devices.

Technical Specifications

• Microphone Type: Dual omni-directional MEMS mics with directional beamforming and DSP
• Frequency response (Speaker): 20-20kHz (music mode), 100-8kHz (talk mode)
• Frequency response (Microphone): 100-8kHz
• Talk time: Up to 18 hrs
• Listen time: Up to 20 hrs
• Bluetooth® version: 5.2
• Wireless range: Up to 30 m / 100 ft (open field line of sight)
• Cable length (USB-C charging cable): 4.9 ft (1.5 m)

For more information and support, visit: www.logitech.com/support/zonevibe100