User Guide for LINK TECHNOLOGIES models including: PowerLink, AT2 Battery PoE, PowerLink AT2 Battery PoE, Battery PoE, PoE
www.LinkTechs.net PowerLink AT2 Manual v1.2 8839 Oermann Road 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net
File Info : application/pdf, 23 Pages, 956.37KB
DocumentDocumentwww.LinkTechs.net PowerLink AT2 Manual v1.2 PowerLink 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net AT2 Manual Hardware Overview · Power Button on Top · 48v and 24v buttons on front of unit · LCD screen to tell you current status · Light on top · Power Over Ethernet LAN Port · USB-C Charging system 2A · USB Power Out · Optional 5 GHz Access Point Quick Start · Power-On Powerlink AT2 Device · Press the voltage you need to power your CPE · Use a short CAT5 cable to go between the LAN port on the PowerLink AT2 and the CPE. · Connect to www.linktechs.net SSID · IP address should come from CPE (if you are configured for DHCP on your wireless device), or you will need to statically configure it. · Connect to your CPE using web/winbox or installation application. Normally there is no need to login to the PowerLink, unless you wish to do some kind of special configuration, things like change VLANs, SSIDs, security etc. Most of the time the unit will be completely pass-though, and transparent bridging. Most manufacture applications prefer this. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Contents Hardware Overview ................................................................................................................................................ 1 Quick Start............................................................................................................................................................... 1 Features: ............................................................................................................................................................. 3 WiFi Speed ...................................................................................................................................................... 4 Optional USB AC Stick ..................................................................................................................................... 4 Hardware ................................................................................................................................................................ 4 Top Features ....................................................................................................................................................... 4 Front Buttons/Leds ......................................................................................................................................... 4 Functions............................................................................................................................................................. 5 Top Button ...................................................................................................................................................... 5 24V / 48V Button ............................................................................................................................................ 5 Reset Button ................................................................................................................................................... 5 Yellow Battery LED Indicator .............................................................................................................................. 5 Display................................................................................................................................................................. 6 Default Configuration ......................................................................................................................................... 7 To Automate the Preperation of CPEs ............................................................................................................ 7 Iperf3................................................................................................................................................................. 10 Samba3 and USB flash key ........................................................................................................................ 2019 Repository: .................................................................................................................................................... 20 Upgrading Firmware ......................................................................................................................................... 20 Special Functions .......................................................................................................................................... 2221 NOTICE: Optional 5GHZ AC USB Stick .......................................................... Error! Bookmark not defined.21 Appendix: ...................................................................................................................................................... 2322 Cat5 Pinout................................................................................................................................................ 2322 Cambium Cable ......................................................................................................................................... 2322 V cable, for LAN speed test ....................................................................................................................... 2322 Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Features: · 1.5-inch TFT RGB display · Passive Power Over Ethernet Device, Ubiquiti, Mikrotik, Cambium, etc. · Switchable 24V and 48V - 30W PoE. · Will power up 802.3at devices using 8 wires · WiFi 2.4 GHz - Optional 5GHz AC Module · 14000mA/h for charging external devices. · Short-circuit, Overload, Temperature, Low Output Voltage protection. · Automated preparation of CPE antenna. Via Linux script · OpenWrt / Lede, HTML menu, working opkg repository · VLAN support · Iperf3 -s always active · Samba 3, for files and memory sharing, USB flash memory. · Works Perfectly with Several Manufacture Apps -- EasyUBNT, Tik-App, Ubntu, Cambium · IEEE 802.3 (Pin 4 e 5 +24V, Pin 7 e 8 GND) · For old Cambium CPE you have to create a LAN cable with reversed power pin. · One-year warranty. · USB Out (Charge/LED) · Wi-Fi · PoE On · Accessory: o Hard Case o USB Cable o LAN Cable o 5Ghz AC module (Optional) · 280 grams · 86x103x30mm · MT7620 chipset 2.4GHz · Two PCB antennas. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 WiFi Speed (theoretical): 2.4 GHz Width 40Mhz = 86 Mbps 2.4 GHz Width 20Mhz = 43 Mbps Optional USB AC Stick AC 5Ghz Width 80Mhz = 292Mbps AC 5Ghz Width 40Mhz = 150Mbps AC 5Ghz Width 20Mhz = 72 Mbps 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Hardware Top Features 1. LAN Port 2. Reset Button 3. USB-C Power Input 4. Power Button 5. LED Light 6. USB with Power Out Front Buttons/Leds The Pwr led tells you if the router is powered on. The Battery light will blink if the unit is low on charge or charging, it will be solid if the unit is finished charging. WiFi blink, when client are associated Eth blink, when Ethernet are connected Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 Functions 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Top Button This is the button on the top of the unit, next to the LAN and Power In port. · One click Turn on Router and WiFi Turn on AT2 · One click Turn off Router and WiFi · Fast Double click Turn off AT2 · Long click button Turn on/off LED Light 24V / 48V Button The 24v button is Yellow in color and the 48v button is Red. Be sure your device supports 48v and/or 24v before plugging them in. The PowerLink does not have a method to detect what voltage should be applied, therefore, it will apply the voltage you select. Look on the screen for the current voltage output. · One Click Enable POE out with selected voltage and Enable WIFI · One Click Disable POE out and disable WIFI · One Click at boot button Show Test Reset Button The reset button is to either preform a firmware update or to factory Reset the unit. This is typically one of the major troubleshooting steps that · Pressed during startup firmware update · Pressed for 30 seconds factory reset. Yellow Battery LED Indicator This indicator tells you when the unit is charging, and when it is completed charging. It also will tell you when a low battery condition is enabled. · While charging = Blinking LED · End of Charge = LED ON · In discharging = LED ON · Low Battery = Blinking LED Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Timeout If the PoE out is on and the power is lower then 2W, unit turns off after 2 minutes. If only WiFi is on, it turn off after 15 minutes. You can remove this timeout from configuration. Display The LCD displays a number of items, the battery level, Current PoE Voltage going out the POE Ethernet port and the milli-amp draw, as well as an ethernet status Icon. It also can tell you if your configuration script was successfully completed or if it failed. · Battery level · PoE voltage · Ethernet Status ICON o switched off - router off o full ethernet at 100 Full Duplex o half Problems with ethernet cable o unplg Cable Not Plugged In · Power delivered · config done When the script is successful · config failed When the script fails Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Default Configuration To Connect to the device and change options, you can connect via web browser via http://192.168.1.69 or SSH to the same IP address. The default IP Address: 192.168.1.69 Username: root password: geva To Automate the Preperation of CPEs On the PowerLInk AT, through ssh connection: /root/CpConf.sh daemon for CPE configuration /root/OnCpScript.sh executed on the CPE for its configuration /root/system.cfg copied on the CPE for its configuration /root/icons.sh daemon that controls icon on TFT On HTML page of router -> System -> Startup -> Local Startup iperf -s& /root/icons.sh & #/root/CpConf.sh & 1. Remove comment (#) on the last line, for enable auto CPE conf. 2. Customize OnCpScript.sh for your requirement. 3. Copy your CPE configuration file, system.cfg 4. Examples work on the Ubiquiti AirOs CPE Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Web Interface You can access the web interface by browsing to 192.168.1.69. The username is root and password is either linktechs or geva. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Status The tight menu gives you the status page. This includes, overview, Firewall, routes, logs, processes and graphing. The Status page gives you Hardware, Firmware versions and uptime. The network section tells you what is in-use and connected to the device. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Interface / Bridge Under Network Interfaces, you have the option to configure new interfaces and/or edit the existing. The default should be LAN, this is a br-lan bridge group. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net By clicking edit, you can edit the LAN interface, this will bring up the following menu options: Here, you have options to select what protocol you wish, this could be used on the ethernet or any other interface. The default option is static address, where the br-lan is statically configured. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Other options include; PPP, DHCP Client, or PPPoE. I would always recommend that you bring up the default interface stactially as well as upon boot. NOTE, there is options here that can render the device not reachable, and then a factory reset would be the only option. Under Physical Settings, you can tell that this interface is a bridge, enable STP and/or IGMP snooping, as well as select what interfaces you wish to bridge together. The image below is the default configuration. DHCP-Server Under Network Interfaces, hit edit your interface and then you can go to DHCP Server. Here your configure options for DHCP Server. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Wireless This section under status, gives you the wireless access point, SSID and encryption as well as the channel of radios0, this is the 2.4 GHz radio built into the PowerLink AT2. The radio1 would be if you have added the 5 GHz module into the unit. Under Network Wireless, you can configure the wireless interfaces: Once here you can click Edit to edit the WLAN you wish. Here you have options to disable the radio interface, as well as set your network mode, channel, and width. You also have the option to select auto channel if you prefer. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net In advanced settings at the top, you can select your country you are operating in, therefor it will keep the power levels to the max your country supports. NOTE, if you have legacy 802.11b devices, you will need to check the box to allow 802.11b devices, else you can uncheck this. Please test to verify you are not using a legacy device. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Under General Setup, you have options for what mode you wish to operate in, Access Point being the most common. Other options include client, ad-hoc, Monitor, and various WDS modes. Changing SSID You will change your SSID by going to Network Wireless select edit on the radio you wish to modify, then it will be under General Setup. Here you have ESSID, this is your SSID that will appear, if you wish to hide it or change the network that this interface operates off of you can do it here. Securing Wireless Under Network Wireless Wireless Security, you have options to select what security mode you wish to operate in. WPA2-PSK is the recommended. You will enter your network key under KEY Isolating Clients If you wish, you can click advanced settings under your wireless interface and select the check box to isolate clients. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net VLANs Under the Network Switch, you have the ability to add VLANs to your configuration. What VLAN ID and what tag or untagged port it should come from. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 Firewall 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Change Password To Change the PowerLink ATs default password, go to System Administration. Here you can change the default password. Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 DHCP and DNS 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Iperf3 Iperf3 is always running. You can run the following command: iperf3 c 192.168.1.69 On any Linux device, CPE, PC, etc. This Ethernet Test: root@PowerLinkAT:/# iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.1.30, port 50542 [ 5] local 192.168.1.69 port 5201 connected to 192.168.1.30 port 50544 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.02 sec 11.4 MBytes 93.5 Mbits/sec [ 5] 1.02-2.01 sec 11.1 MBytes 94.2 Mbits/sec [ 5] 2.01-3.01 sec 11.2 MBytes 94.1 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-9.02 sec 106 MBytes 99.1 Mbits/sec receiver geva@PC: iperf3 -c 192.168.1.69 Connecting to host 192.168.1.69, port 5201 [ 5] local 172.20.207.228 port 37390 connected to 192.168.1.69 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 12.1 MBytes 101 Mbits/sec 0 225 KBytes [ 5] 1.00-2.00 sec 11.4 MBytes 95.6 Mbits/sec 0 236 KBytes [ 5] 2.00-3.00 sec 11.5 MBytes 96.1 Mbits/sec 0 236 KBytes [ 5] 3.00-4.00 sec 10.9 MBytes 91.7 Mbits/sec 0 236 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-9.48 sec 107 MBytes 95.1 Mbits/sec 0 sender [ 5] 0.00-9.48 sec 0.00 Bytes 0.00 bits/sec receiver Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Samba3 and USB flash key USB flash memory FAT32 mounted in /mnt/usbkey Android and Linux shared as: 192.168.1.69/usbkey Samba3 does not work with windows 10, but you can enable it. (Search in google) Repository: If you set working gateway, repository work, and you can add the modules you need, for example to enable SAMA, GSM dongle, or other drives, the flash free is about 1Mb. Upgrading Firmware 3 available solutions 1. USB Under 4gig capacity, formatted FAT32, firmware "BatteryPoE_at2.bin" a. Plug in USB b. Power-On PowerLink AT2 c. During Startup the Firmware will be updated. 2. Use the Reset Button a. Press Reset Button b. Power-On PowerLink AT2 c. When the Power LED blinks, you should be able to acess the Firmware Page of uBoot via web at address http://192.168.1.69/index.html Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 d. Release reset once you access this page 3. On HTML page of the router a. system, backup, update. 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 Special Functions Connecting to the console, in ssh, and send command for: 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net echo AutoOff=NO > /dev/ttyS0 echo AutoOff=YES > /dev/ttyS0 echo AutoOn=NO > /dev/ttyS0 echo AutoOn=YES > /dev/ttyS0 echo TmrWiFi=NO > /dev/ttyS0 echo TmrWiFi=YES > /dev/ttyS0 echo TmrPoE=NO > /dev/ttyS0 echo TmrPoE=YES > /dev/ttyS0 Disable Auto WiFi Off, Turning the PoE Off Enable Auto WiFi Off, Turning the PoE Off (Default) Disable Auto WiFi On, Turning the PoE On Enable Auto WiFi On, Turning the PoE Off (Default) Disable Auto off after 15 minutes, in only WiFi Enable Auto off after 15 minutes, in only WiFi (Default) Disable Auto off after 2 minutes, in PoE under 2W Disable Auto off after 2 minutes, in PoE under 2W (Default) You can also add interested line on the HTML menu: System / Startup / Local Startup Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023 www.LinkTechs.net PowerLink AT2 Manual v1.2 Appendix: Cat5 Pinout 314.735.0270 647.725.7011 636.660.1534 sales@LinkTechs.net support@LinkTechs.net invoices@LinkTechs.net Cambium Cable This cable Is for those cambium CPEs that require reversed power pins. It is available on www.linktechs.net Below is a chart of the Cambium CPE Reversed Power Pin Out V cable, for LAN speed test This cable allows you to Power your CPE and plug a LAN cable into your device for Ethernet Speed testing, eliminating the need for the Wireless Access Point. This cable is available at www.linktechs.net AC 5 Ghz adapter Link Technologies, Inc. www.linktechs.net www.towercoverage.com 8839 Oermann Road Dittmer, MO 63023Microsoft Word 2019