Kit Contents
The Wahl 2520L hair clipper kit typically includes the clipper unit, various comb attachments, and a charging cable. Please note that the exact contents of your kit may vary from those shown or illustrated.
Charging Instructions
Standard Charging
Connect the clipper to a power source using the USB-C charging cable. A full charge takes approximately 2.5 hours. The charging indicator light will be red while charging and turn green when fully charged.
Quick Charge
For a quick boost, charge the clipper for 5 minutes to get approximately 3 minutes of usage time.
- Charging Indicator:
- ● Red: Charging
- ● Green: Fully Charged
Cleaning and Maintenance
Detaching the Blade Head
To clean, first ensure the clipper is turned off. Gently detach the blade head from the main body of the clipper.
Rinsing
Rinse the detached blade head under running water to remove hair clippings. Do not submerge the entire clipper unit in water.
Drying
After rinsing, allow the blade head to air dry completely before reattaching it to the clipper body.
Important Note
Do not use the clipper on hair shorter than 5mm (approximately 1/4 inch) or for very close shaves in certain areas, as indicated by the crossed-out symbols.
Usage Instructions
Attaching Comb Guides
Select the desired comb guide and align it with the clipper blades. Gently push the comb guide onto the clipper until it clicks securely into place.
Trimming
Turn on the clipper and move it against the direction of hair growth for an even trim. Use different comb guides to achieve various hair lengths.
Detaching Comb Guides
To remove a comb guide, gently pull it away from the clipper blades.
Technical Specifications
| Component | Specification |
|---|---|
| Hair Clipper Input | 5.0 Vd.c.; 1.0 A |
| Battery Voltage | 1X3.6 Vd.c. |
| Adaptor (ZDJ050100EU, ZDJ050100BS) Input | 100-240 V~, 50/60 Hz, 0.2 A |
| Adaptor Output | 5.0 V d.c., 1.0 A, 5.0 W; Class II |
Comb Attachments
The Wahl 2520L comes with a variety of comb attachments for different hair lengths:
- 1.6 mm
- 3.2 mm
- 4.8 mm
- 7.9 mm
- #1 (3 mm)
- #2 (6 mm)
- #3 (10 mm)
- #4 (13 mm)
- #5 (16 mm)
- #6 (19 mm)
- #7 (22 mm)
- #8 (25 mm)
- #1/2 (1.5 mm)
- #1 (3 mm)
- #1 1/2 (5 mm)
- #2 (6.5 mm)
- #2 1/2 (8 mm)
- #3 (9.5 mm)
- #3 1/2 (11 mm)
- #4 (13 mm)
