WLMOUSE BEAST X Mini

Product Overview

The WLMOUSE BEAST X Mini is a lightweight gaming mouse designed for optimal performance. It features a magnesium alloy construction and advanced components for a superior gaming experience.

Specifications

• Length: 4.57in / 116mm
• Width: 2.28in / 58mm
• Height: 1.38in / 35mm
• Weight: 34±2g
• MCU: Nordic 52840
• Sensor: PAW3395
• Polling Rate: 4K/8K
• Encoder: TTC Dust - Proof Silver
• Switches: TTC Nihil Transparent Black Dot
• Side Buttons: Omron Blue Dots

Connectivity

Wired Connection

Connect the mouse using a USB 3.0 port or higher for optimal performance.

Wireless Connection

For the best wireless performance, ensure the distance between the receiver and the mouse does not exceed 50 cm, and there are no wireless interference devices around the mouse. Connect to a USB 3.0 port or higher.

Dongle Pairing

If the mouse cannot be used in wireless mode, follow these steps to pair the dongle:

1. Unplug the mouse from the computer. Switch the mouse back into wireless mode to start the process of pairing.
2. Hold the left and right mouse buttons, along with the front side button for 3-4 seconds.
3. Once the green LED on the mouse starts flashing faster than normal, connect the 4k dongle to the computer with the included cable.
4. When the LED on the mouse turns off, pairing has been completed.

DPI Setting

The default DPI is set to 1600 DPI. You can adjust the DPI levels in the driver settings. There are 6 DPI levels available.

To switch the DPI, press and hold the left mouse button, right mouse button, and scroll wheel/middle mouse button simultaneously for 3 seconds.

Available DPI levels: 400, 800, 1600, 3200, 6400, 26000 DPI.

Polling Rate Setting

The mouse polling rate is default set to 1000Hz. To switch the polling rate, press and hold the mouse side button, scroll wheel/middle button, and right button simultaneously for 3 seconds.

Wired Connection Polling Rates: 125 Hz, 250 Hz, 500 Hz, 1000 Hz

Wireless Connection Polling Rates: 125 Hz, 250 Hz, 500 Hz, 1000 Hz, 2000 Hz, 4000 Hz, 8000 Hz

LOD (Lift-off Distance) Setting

The default Lift-Off Distance (LOD) is 1mm. To switch it, press and hold the mouse front side button, left button, and scroll wheel/middle button simultaneously for 3 seconds.

Available LOD Levels: 1 mm, 2 mm

Switching Between 1K and 8K Dongle

To switch between the 1K Nano dongle and the 8K dongle, simultaneously press and hold the mouse's front side button, back side button, and scroll wheel/middle button for 3-4 seconds.

Support and Community

Thanks for choosing WLMOUSE. If you have any questions or comments, or need help with your products, please do not hesitate to contact us.

Email: support@wlmouse.com

Website: www.wlmouse.com

Social Media: @wlmouseofficial

Join the WLMOUSE Discord Community.