DEFENDER Z9 16W Soundbar Operation Manual

Introduction

This document is the operation manual for the DEFENDER Z9 soundbar speaker.

Tehnoteka is an online destination for comparing prices and characteristics of home appliances, consumer electronics, and IT devices. Our site allows you to explore the latest information, detailed characteristics, and competitive prices of products.

Visit us and enjoy an exclusive smart shopping experience by clicking the link: https://tehnoteka.rs/p/defender-soundbar-zvucnik-z9-16-w-akcija-cena/

1. Functions

The soundbar features several controls and modes:

• Click Actions:
• Change Mode: Switch between Bluetooth, MP3, and AUX modes.
• Next Track: Skip to the next audio track.
• Previous Track: Go back to the previous audio track.
• Play/Pause: Start or pause audio playback.

• Long Press Actions:
• Change Backlight Mode: Press and hold to cycle through backlight modes. Press 10 times to turn off the backlight. (Note: When the speaker operates with a backlight, there may be a slight background sound that can be heard in absolute silence; if it bothers you, turn off the backlight.)
• Volume Up: Increase the volume.
• Volume Down: Decrease the volume.

• Power:
• On/Off: Press to turn the device on or off.

• Media Support:
• TF Card: Insert until it clicks (sold separately). Maximum supported size is 16GB, formatted in FAT32.
• USB Flash Drive: Insert (sold separately). Maximum supported size is 16GB, formatted in FAT32.

Charging Indicator: Shows the charging status.

2. Charging

The soundbar can be charged using a Type-C 5V connection.

• A USB charger is sold separately.
• Charging Status: Indicated by an indicator light (Charging / Charged).

3. Bluetooth Connection

To connect via Bluetooth:

1. Select Bluetooth mode on the soundbar.
2. Enable Bluetooth on your phone or other device.
3. Search for and select "Z9" from the list of available devices.

4. Using Two Enjoy Z9 Speakers Simultaneously (TWS Mode)

To pair two Z9 speakers for True Wireless Stereo sound:

1. Turn off Bluetooth on your phone.
2. Turn on both Z9 speakers.
3. Select Bluetooth mode on both speakers.
4. On one speaker, long-press the button for 3 seconds to initiate TWS search. You will hear a prompt sound.
5. Wait for 2-3 minutes. You will hear a prompt sound indicating that the TWS connection is established.
6. Turn on Bluetooth on your phone and connect to the paired system (usually appears as one device).

5. FM Radio

To use the FM radio function:

1. Connect the Type-C or AUX cable. The AUX cable acts as an antenna.
2. Select FM mode on the soundbar.
3. Long-press the button to start automatic station searching.
4. Wait for 2-3 minutes for the search to complete.
5. Use the track buttons (click) to switch between previous/next stations.

Note: Turning off the backlight may improve radio tuning.

6. AUX Playback

Connect the soundbar to external audio sources using the AUX input.

• Connecting to a TV: Select AUX mode. Attention: If the TV does not have a headphone output, you cannot connect a speaker to it!
• Wired Connection to a Laptop or Smartphone: Use the AUX input.
• An adapter (2 TRS (F) - TRRS (M)) may be required and is sold separately.

7. Phone Call

The soundbar can function as a hands-free device for phone calls.

• Answer/End Call: Click the button.
• Refuse Call: Long-press the button.

Specifications

Package Contents

• Speaker System
• Operation Manual
• Type-C Jack Cable
• AUX Cable

Safety Precautions

Declaration of Conformity: Operation of the device may be affected by strong static, electrical, or high-frequency fields. If interference occurs, try increasing the distance from the source.

Disposal of Batteries, Electrical and Electronic Equipment: This symbol on the product, batteries, or packaging indicates it cannot be disposed of with domestic waste. It must be delivered to an appropriate collection and recycling company.

Usage Precautions:

1. Use the product only for its intended purpose.
2. Do not disassemble. This product contains no user-serviceable parts. For maintenance or replacement, contact the seller or an authorized Defender service center. Ensure the product is unbroken upon receipt.
3. Keep away from children under 3 years old. May contain small parts.
4. Keep away from humidity. Do not immerse the product in liquids.
5. Avoid vibrations and mechanical stresses that could cause damage. No warranty is provided for mechanical damage.
6. Do not use if the product has visible damage or is obviously defective.
7. Do not use at temperatures outside the recommended range (see manual), in humid conditions, or in aggressive environments.
8. Do not put into the mouth.
9. Do not use for industrial, medical, or manufacturing purposes.
10. If transported in sub-zero temperatures, allow the product to warm up in a warm room (+16-25°C) for 3 hours before use.
11. Turn off the device when not in use for extended periods.
12. Do not use while driving if it distracts attention, or when legally required to turn it off.

Storage, Transport, and Sales: No special conditions are foreseen. Disposal at the end of its service life must comply with all national regulations and laws.

Manufacturer and Importer Information

Manufacturer: China Electronics Shenzhen Company. Address: 35/F, Block A, Electronics Science & Technology Building, Shennan Zhonglu, Shenzhen, China. Made in China.

Importer: Defender Technology OÜ, Betooni str 11, 11415, Tallinn, Estonia.

Shelf Life: Unlimited.

Service Life: 2 years.

Warranty Period: 3 months.

Date of Manufacture: See package and/or product center serial number (format: xxxxxDDMMYYxxxxx).

The manufacturer reserves the right to change package contents and specifications. The latest and detailed manual is available at www.defender-global.com.