Minew Official Website | IoT Devices Manufacturer
Owner's Manual for QualSights models including: QS-WPS Waterproof Broadcasting Device, Waterproof Broadcasting Device, Broadcasting Device, Device
Georama, Inc. DBA QualSights WPS 2A2OV-WPS 2A2OVWPS wps
File Info : application/pdf, 7 Pages, 306.10KB
DocumentDocumentQS-WPS Waterproof Broadcasting Device Datasheet Part # QS-WPS Description QS-WPS is a waterproof broadcasting device with BLE 5.0, SOS button, and indoor positioning. Users can push the SOS button when they need help. Also, it can enable employees to check- in-& out in the office for management optimization with advanced NFC tech. 1 INTRODUCTION QS-WPS is a new generation beacon with push-button for hospital patients, personnel positioning, and emergency call. It is equipped with Bluetooth® 5.0 hardware platform based on nRF52 chip, advertising iBeacon, Eddystone ( UID, URL, TLM), and Accelerometer sensor simultaneously. The user can configure the device beacon via BeaconSET+ App as well. FEATURE - Advertise i Beacon & Eddystone - 3 - axis sensor data( Only for NRF 5 2 8 3 2 ) - Bluetooth® 5 . 0 chipset - 1 pc CR series replaceable coin battery - A push- button on the beacon - IP6 7 waterproof grade, dust- proof, shock- proof - Detachable wristband - NFC available APPLICATION - Activity monitoring - Hospital management - Indoor location - Personnel tracking QS-WPS Waterproof Broadcasting Device ACTIVATE & STOP QS-WPS - Press the button of QS-WPS for 5s, the LED lights on 3s then off, the device is activated on; - Press the button of QS-WPS for 5s, the LED flashes 5 times then off, the device is turned off. CONFIGURATION TOOL - BeaconSET+ (iOS & Android); - The QS-WPS waterproof broadcasting device can be turned off by app BeaconSET+; 2 ELECTRONIC PARAMETER Item Case Color Battery Model Operation Voltage Transmission Circuit Transmission Range Antenna Net Weight Size Value White 1 x CR series 1.8-3.9V 5.3mA (Max.) 90 meters 50ohm 12g 35.9*11mm Remarks Other colors can be customized 1pc CR series button battery, 220mAh, 3.0V DC Tested at 0d Bm transmission power Maximum On board / PCB Antenna With battery Main body CONFIGURABLE PARAMETERS Each QS-WPS device has been pre-configured in the factory before the shipment. Here below is given the main parameters and default settings. BeaconPlus Firmware V1 Type iBeacon UID (On) URL (On) TLM (On) Item UUID (16 bytes) Major (2 bytes) Minor (2 bytes) Measured Power Tx Power Interval(ms) Instance ID Namespace ID Measured Power Tx Power Interval(ms) URL Measured Power Tx Power Interval(ms) Electricity mV Boot time PDU packets Measured power Tx power Interval(ms) Default Settings E2C56DB5- DFFB-48D2- B060- D0F5A71096E0 (Proximity) 0 0 -59d Bm9 (0xC5) 0d Bm 900ms Random Random -24d Bm(0xE8) 0dBm 2000ms http: / / www. minew. com -24d Bm(0xE8) 0dBm 2000ms By default By default By default -24d Bm(0xE8) 0dBm 4000ms 3 INFO (On) Extra Function ACC Sensor Device name Electricity MAC address Measured power Tx power Interval(ms) Password Connectable Reset factory Update firmware X- axis Y- axis Z-axis BeaconPlus Firmware V2 QS-WPS By default Factory setting -24d Bm(0xE8) -8dBm 4000ms minew1 2 3 ( configurable) Yes( it is configuration mode) available available 1.The value is decided by the real status: stable or move; 2 . Only act on the beacon with the accelerometer sensors inside. Type Item UUID(16bytes) Major(2bytes) iBeacon ( Trigger once) Minor(2bytes) Measured power Tx power Interval(ms) Instance ID UID ( Trigger twice ) Namespace ID Measured power Tx power Interval(ms) URL URL Measured power ( Trigger three- times) Tx power Interval(ms) Default Settings FDA50693-A4E2-4FB1-AFCF-C6EB07647825 10001 (0-65535, configurable) 19641 (0-65535, configurable) -59d Bm(0xC5) 0d Bm (-40~+4d Bm, configurable) 500ms (100ms~10s,configurable) Random Random -24d Bm(0xE8) 0d Bm (-40~+4d Bm, configurable) 2000ms (100ms~10s, configurable) http: / / www. minewtech. com/ -24d Bm(0xE8) 0d Bm (-40~+4d Bm, configurable) 2000ms (100ms~10s, configurable) 4 TLM ( On) INFO ( On) Measured power Tx power Interval(ms) Measured power Tx power Interval(ms) -24d Bm(0xE8) 0d Bm (-40~+4d Bm, configurable) 4000ms (100ms~10s, configurable) -24d Bm(0xE8) -8dBm (-40~+4d Bm, configurable) 4000ms (100ms~10s, configurable) COMPATIBILITY Supporting device& system BLE iOS7.0 and above Android4.3 and above Module of Supporting device BLE4.2 and above i Phone4S, i Phone5/5C/5S iPhone6/6Plus/6S/6SPlus, iPhone7/7Plus iPad mini/mini2/4/Air/pro, etc. Samsung Xiaomi ,Huawei ,OnePlus, Vivo, OPPO, etc. 5 PACKING INFORMATION Details Quantity(QS-WPS) Net Weight Gross Weight Size Inner Box( Battery included) 1pcs / box 12g 48.5g 180x 100 x 12 cm Outer Box( Battery included) 96pcs / carton 1152g 5.1Kg 32 x 23.5 x 40 cm TRIGGER OPERATION NRF52810 Trigger Operation 1 . Click the button to broadcast i Beacon frame for 60 s 2 . Double click the button to broadcast URL frame for 6 0 s 3 . Press the key three times to broadcast UID frame for 6 0 s NRF52832 Trigger Operation 1 . Single Clicking is not supported 2. By default, double-click and triple click triggers are not available. If they are needed, access to BeaconSet + for setting. 6 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction 7