Coby CCR101 Portable Alarm Clock Wireless Speaker

Overview

The Coby CCR101 is a portable alarm clock with wireless speaker functionality. It features a digital display, Bluetooth connectivity, and various control buttons.

Front View

• Built-in microphone
• Hour digits
• Bluetooth indicator
• Charging indicator
• Alarm indicator
• AM (morning) indicator
• PM (afternoon) indicator
• Previous Track / Volume down button
• Power Button
• Next Track / Volume up button
• Minute digits
• Micro USB charging port

Bottom View

• Battery cover

Charging

Connect the device to a power source using the provided Micro USB cable. A charging indicator icon will appear on the screen while charging and disappear when fully charged. Charging takes approximately 3 hours.

Powering on/off

Powering on

Press and hold the Power Button for 3 seconds to power on the device. The screen will display the current time, and a power-on tone notification will sound.

Powering off

Press and hold the Power Button for 2 seconds to power off the device. The screen will display the word "OFF", and a power-off tone notification will sound.

Setting the Clock

1. Press the Power Button twice to enter clock setting mode.
2. When the hour digits flash, adjust them using the "+" or "-" buttons. Press the Power Button twice again to save the hour and enter minute setting.
3. When the minute digits flash, repeat the adjustment process.
4. After setting the clock, do not press any buttons for five seconds. The device will display the set clock and return to Bluetooth mode.

Notes:

• Press the "-" button twice to switch between 12-hour and 24-hour time formats.
• The "AM / PM" icon is displayed in 12-hour format only.

Setting your alarm timer

1. Press the "+" and "-" buttons simultaneously to switch to alarm timer mode.
2. When the hour digits flash, adjust them using the "+" or "-" buttons. Press the "+" and "-" buttons simultaneously again to save the hour and enter minute setting.
3. When the minute digits flash, repeat the adjustment process.
4. After setting the alarm timer, do not press any buttons for five seconds. The device will display the current time and return to Bluetooth mode, indicating the alarm timer has been set successfully.

Notes:

• The Alarm indicator will light up at the bottom center of the screen in alarm timer mode.
• The alarm volume is fixed and cannot be changed.
• To cancel the alarm timer, press and hold the "+" and "-" buttons simultaneously.
• When the alarm is ringing, press any button to stop it.

Pairing

Bluetooth connection with your device

When the clock is turned on, it automatically enters Bluetooth pairing mode. Turn on Bluetooth on your device, search for "CCR101", and tap to connect.

Pairing mode

• Indicator "BT": flashing rapidly
• Connected to a device (Successfully paired with your media device): Indicator "BT": lighting up; Bluetooth Connected tone notification

The clock will automatically pair with your last successfully connected media device the next time it is turned on.

Controls

Music mode

• Play / Pause: Press the Power Button once.
• Next track: Press the "+" button once.
• Previous track: Press the "-" button once.
• Volume up: Press and hold the "+" button.
• Volume down: Press and hold the "-" button.

Note: The highest volume level is 30. The device will emit two repeated short beeps when reaching the highest level.

Phone call mode

• Answer / End a call: Press the Power Button once.
• Reject a call: Press and hold the Power Button for 1 second.

Replacing the battery

This device uses a 18650 lithium battery. If charging fails, the battery may be depleted and needs replacement. It is recommended to replace the battery every two years with normal use.

1. Pull the battery cover upwards to remove it.
2. Remove the old battery and insert a new 18650 lithium battery (3.7V/1500mAh) following the indicated direction in the battery compartment.
3. Align the clips of the battery cover with the compartment slots and press down until it clicks into place.

Specifications

Specifications are subject to change without notice.

Safety Statement

Safety Precautions

1. Avoid dropping.
2. Do not disassemble this device.
3. Do not expose to rain, moisture, or submerge in water.
4. Ideal temperatures: 0°C to 35°C. Avoid extreme temperatures.
5. Keep away from excessive heat, sunlight, fire, or similar.
6. Do not use outdoors during thunderstorms.
7. Use original or certified cables.
8. Do not use corrosive cleaners or oil for cleaning.
9. Keep out of reach of children. Contains small parts that may be a choking hazard.
10. Observe local laws and regulations.
11. To prevent damage, do not use in dusty, smoky, damp, or dirty environments.
12. Do not use, store, or transport near flammables or explosives.
13. Remove the battery if the device will not be used for a long time.

FCC Statement

FCC ID: 2AMSOSTW003. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

RF Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency RF exposure Guidelines.

Disclaimer

All information, design, and specifications in this manual were correct at the time of publication. As the product undergoes continuous upgrades and changes, the final device may have slight differences. The contents of this manual are subject to change without prior notice, and Coby will not be liable for any errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this manual.

COBY® IS A REGISTERED TRADEMARK OF HEARST COMMUNICATION, INC. AND USED UNDER LICENSE BY SUMMIT ELECTRONICS, LLC. © 2022 HEARST COMMUNICATION, INC. ALL RIGHTS RESERVED AND ANY USE OF SUCH MARKS BY SUMMIT ELECTRONICS LLC IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.

WARNING: CANCER AND REPRODUCTIVE HARM - WWW.P65WARNINGS.CA.GOV.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Fesco Distributors, Inc. is under license. Other trademarks and trade names are those of their respective owners.

Summit Electronics LLC One Year Limited Warranty

This warranty covers products listed in the chart below. Before returning your Product for service, please read the instruction manual carefully. If you are still having trouble, contact Technical Support at support@summitcegroup.com.

Warning: Some products may contain small components that can be swallowed. Keep out of reach of children.

Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC warrants to the original purchaser that the Product will be free from defects in material or workmanship under normal, non-commercial use for the applicable Warranty Period.

The Warranty Period includes separate "Coverage Periods" for Parts and Labor, each for one year, starting from the original date of purchase. If a defective Product is returned during the Warranty Period, SUMMIT ELECTRONICS LLC will, at its option, repair or replace the Product with a new or refurbished one, free of charge for Parts and/or Labor during the specified Coverage Period, excluding shipping charges which are the Customer's responsibility.

This Warranty specifically excludes Products or components subject to or resulting from:

• (a) Neglect, misuse, accident, improper application, violation of operating instructions, customer-induced damage, or alteration/removal of serial number.
• (b) Modification or repair by anyone other than SUMMIT ELECTRONICS LLC or an authorized party.
• (c) Damage due to power surges, incorrect voltage, misconnection to devices, or device malfunction.
• (d) Cosmetic damage from normal wear and tear.
• (e) Shipping damage during transit.
• (f) Damage caused by heat, sunlight, electromagnetic conditions, or other climatic conditions.
• (g) Acts of God.

The product is sold for personal, non-commercial use only. It is not warranted for commercial or rental use.

The product is not warranted against failure, and should not be used in applications where data stored on the Product could be breached or compromised, or where the data is relied upon for medical or lifesaving applications. SUMMIT ELECTRONICS LLC disclaims any warranty for such uses to the fullest extent permitted by law. The Customer assumes all risks associated with such uses and agrees to indemnify SUMMIT ELECTRONICS LLC for any damages claimed against it for such uses.

EXCEPT FOR THE EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS ARE PROVIDED “AS IS”, AND SUMMIT ELECTRONICS LLC DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD-PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL SUMMIT ELECTRONICS LLC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF SUMMIT ELECTRONICS LLC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, SUMMIT ELECTRONICS LLC'S AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING THE DAMAGES, IF ANY.

This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must email SUMMIT ELECTRONICS LLC Technical Support prior to making a Product return. Customer must include with Product return the following items (failure to enclose any of these items may result in a delay in the processing of your Warranty claim): (i) a dated sales receipt that indicates the place of purchase, model number of Product, and amount paid; (ii) a detailed description of Customer's problem with Product; (iii) Customer's full name, phone number, and return address, and; (iv) a money order made out to SUMMIT ELECTRONICS LLC Electronics Corporation to cover return shipping charges to US destinations only, for the applicable dollar amount shown for the Product in the table above. SUMMIT ELECTRONICS LLC will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to Customer. Return your Product freight-prepaid in its original packaging, or packaging that affords an equal measure of protection. Please allow 4 to 6 weeks for the processing of your claim (6 to 8 weeks from November to February).

Customer Service

Contact us at support@summitcegroup.com for return information and customer support!