AZZA Inferno 310 DH User Manual

Specifications

Type: ATX Mid-Tower

Color: Black (exterior)/Black (interior)

Side Panel Window: Tempered Glass with Rubber Mounts

Max CPU Cooler Height: Up to 155mm

Motherboard Compatibility: ATX, Micro ATX

Expansion Slots: 7

External 5.25" Drive Bays: 1

Internal 2.5" Drive Bays: Up to 6 (2 with metal tray)

Internal 3.5" Drive Bays: Up to 2

Max Video Card Length: Supports up to 380mm long video cards

Front Ports: 2x USB 3.0, HD Audio

Cooling System:

• Fans Installed: Front 1x120mm AZZA HURRICANE II Digital RGB fan, Rear 1x120mm AZZA HURRICANE II Digital RGB fan
• Available Fan Ports: Top 3x120mm or 2x140mm, Front 3x120mm or 2x140mm (1x120mm fan included), Rear 1x120mm (1x120mm fan included)
• Water Cooling: Supports radiators up to 360mm on top/280mm in front

Physical Specs:

• Dimensions (HxWxD): 480x205x475mm / 18.9x8.1x18.7 inches
• Weight: 6.7 kg / 14.8 lb

Features:

• Digital RGB Light Effects on Front, 2x120mm Digital RGB fans
• All Digital RGB light devices controlled by Digital RGB RF Remote
• Tempered Glass Side Window allows for clear visuals to inner components
• Isolated Chamber for power supply to prevent heat affecting other components
• Easy installation cooler with a pre-cut hole for CPU cooler installation without removing the motherboard

Installation Instructions

1. Chassis Parts Identification

The following parts are included in the chassis:

• 1. Dust filter
• 2. Right side panel
• 3. Door
• 4. SSD brackets
• 5. HDD/SSD tray
• 6. Front bezel
• 7. HURRICANE II Digital RGB fans x2
• 8. Hand screw
• 9. Left side panel
• 10. ODD bay

Diagram showing the location of each chassis part is available in the original document.

2. Control Panel Functions

The front control panel includes the following ports and buttons:

• Power Button
• USB 3.0 (Blue) Ports
• Audio Jacks (Mic and Headphone)
• HDMI (Optional)

Diagram illustrating the control panel layout and port identification is available in the original document.

3. 3.5"/2.5" HDD Installation

The case supports installation of 3.5" HDDs and 2.5" SSDs. Specific mounting points and trays are provided for these drives.

• Installation of 3.5" HDD using mounting holes (0.0).
• Installation of 2.5" SSD using mounting holes (0.0).
• Installation of 2.5" SSD on bracket (0.0).

Detailed diagrams showing the drive installation process are provided in the original document.

4. Cooling System Installation

The Inferno 310 DH supports various cooling configurations:

• Front: Supports up to 280mm radiators and 120mm/140mm fans.
• Top: Supports up to 360mm radiators and 120mm/140mm fans.
• Rear: Supports a 120mm fan.

Diagrams illustrating fan and radiator placement are available in the original document.

5. AZZA Hurricane II Digital RGB Fan Installation

To connect the Digital RGB fans:

• The first Digital RGB fan should be connected to the Digital RGB LED RF remote control receiver.
• Additional fans can be daisy-chained to the first fan using the provided connectors.

Diagrams showing the fan connection and daisy-chaining process are available in the original document.

Digital RGB RF Remote Functions

The included remote control allows for management of the Digital RGB lighting effects:

• Power Button: Turns RGB lighting on/off.
• Speed Control: Adjusts the speed of lighting effects.
• Mode Buttons: Cycles through various lighting modes.
• Color Control Buttons (R, G, B): Adjusts the color of the lighting.
• Brightness Control: Modifies the brightness of the lighting.
• Static Screen Button: Sets a static color.

Diagram of the remote control with labeled buttons is available in the original document.