Manuals+

Gorilla GS29 Soundbar User Guide

Model: GS29

What's in the Box

The package contains the following items:

Understand Your Audio System

The Gorilla GS29 Soundbar features backlit speakers, a control panel, and a backlit subwoofer. It includes various input and output sockets:

The soundbar also has seven color breathing lights: red, green, blue, yellow, cyan, purple, and white.

Control Panel

The control panel includes:

Power On / Off

To power on the SoundBar:

  1. Insert the appropriate 12V plug cable into the power input socket.
  2. After powering on, briefly press the power switch key [power-symbol] to turn on the machine.

To power off the SoundBar:

  1. Short press the power switch key [power-symbol] while in the power-on state.

Fuse Information: The unit uses a 15 Amp Blade Fuse. If the fuse holder is wet, do not remove the fuse to avoid electric shock. Ensure the bottle cap clicks into place when closing.

WARNING: The SoundBar requires an external 12VDC power supply. Ensure your vehicle's battery or voltage regulator is 12VDC. A DC-DC converter may be needed if the voltage is not 12V. Using a non-12VDC source can cause damage.

BT Operation

Pairing BT Devices

  1. After powering on, switch to BT mode. The 'BT' icon will flash.
  2. Turn on the BT function on your phone and search for 'GS29' to connect.
  3. Upon successful pairing, the 'BT' character will remain lit, and a 'BT connected' sound will play.
  4. You can now play music from your mobile device.

If the phone disconnects or goes out of range, the 'BT' character will flash, and a 'BT disconnected' sound will play.

If a password is required, use '0000' or '1234'.

Multifunctional Control BT Operation

Volume Control

Multifunctional Operation

Radio Mode

Radio Operation

  1. In power-on mode, short press the MODE key [mode-symbol] to select radio mode.
  2. Short press the mute key [mute-symbol] to activate mute mode; press again to deactivate.
  3. Long press the scan key [scan-symbol] to automatically search and store radio stations. Up to 18 stations can be stored.

Frequency Search

USB Mode

USB Operation

  1. In boot mode, short press the MODE key [mode-symbol] to select USB mode. USB mode is skipped if no USB drive is detected.
  2. Press the play/pause button [play-pause-symbol] to start playing music.
  3. Press the play/pause button [play-pause-symbol] again to pause playback.
  4. Press the next track button [skip-forward-symbol] to play the next song.
  5. Press the previous track button [skip-back-symbol] to play the previous song.

Volume Control

AUX Mode

AUX Operation

  1. In boot mode, short press the MODE key [mode-symbol] to select AUX mode. AUX mode is skipped if no 3.5mm audio socket is detected.
  2. Short press the mute key [mute-symbol] to enter silent mode.
  3. Short press the mute key [mute-symbol] again to release mute mode.
  4. Press the next track button [skip-forward-symbol] to play the next song.
  5. Press the previous track button [skip-back-symbol] to play the previous song.

Volume Control

BT Broadcast

The BT broadcast function allows multiple SOUNDBAR units to play audio synchronously. You can define one unit as the host and others as slaves.

Broadcast Connection

  1. Host Setup: In power-on state (BT or USB mode), long press the BT key [bluetooth-symbol] on the host panel to enter broadcast connection mode and search for slaves.
  2. Slave Setup: Long press the BT key [bluetooth-symbol] on the slave panel (must be in BT or USB mode) to connect. Other modes do not support this function.
  3. Broadcast function automatically searches for connections.
  4. After successful connection, the host and slaves will play the same audio source. The first speaker to enter broadcast mode is the host; subsequent speakers are slaves.

Broadcast Disconnection and Connection

Function Operation in Broadcast Playback Mode

Note: Slave machines cannot return control to the host. Karaoke function only supports local audio and not broadcast transmission/playback. Remote control functions are similar.

Installation Diagram

Follow these steps for installation:

  1. Insert the left and right brackets into the grooves on both sides of the host and tighten with screws using a hexagonal spoon.
  2. At a suitable location on the vehicle, fix the upper mounting bracket with screws and anti-slip rubber pads. Adjust the lower mounting bracket to align with the host's mounting bracket and tighten with screws.

Remote Control Operation

Cautions:

Key Functions:

Detailed Key Descriptions:

Troubleshooting

Trouble Cause Solution
Unit will not turn on The fuse is blown
Main acc switch not engaged		 Check / replace the fuse
Turn switch to on position
No sound is heard Device volume is low / muted
Device is paused or muted		 Turn the volume level up
Check your devices playing / volume status
Cannot pair BT The BT function of the device is not enabled Refer to the user manual of the device for how to enable the BT function
The audio quality is poor after connection with a BT enabled device The BT reception is poor Move the device closer to the audio system or remove any obstacle between the device
Unit has become unresponsive Power glitch or interference Disconnect power for 10 seconds to reset

Specifications

Dimensions:

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Warranty Registration

Register your one-year warranty at: www.gorillaridesev.com/pages/register-your-soundbar-warranty

Warranties must be registered within ten (10) days from the date of purchase to be valid. Warranties do not transfer.

Models: EV GS29 Soundbar, EV GS29, Soundbar

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7407977 Microsoft: Print To PDF