Assembly Instructions
ITEM: 2088
Description: Queen Pull Out Sofa Bed
Thank you for purchasing this quality product. Please check all packing material carefully for small parts that may have come loose inside the carton during shipment.
DO NOT RETURN TO THE STORE!
If parts are missing or damaged, we will gladly ship replacement parts free of charge. For assistance, please email davrwc325@gmail.com.
CAUTION:
- Do not fully tighten bolts/nuts until the product is fully assembled.
- Keep all hardware out of reach of children.
NOTICE:
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep these instructions for future reference.
- Check to ensure all "PARTS" and "HARDWARE" quantities, as noted, are enclosed prior to commencing assembly.
- Place all furniture parts on a clean and flat soft surface to prevent scratches.
- Where assembly instructions state that assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
- Since the dimensions of our products are manually measured, there may be an error of ±0.79 inches between the real product and the measurement data. The measurement data is for reference only.
PART LIST:
- Part 1: Sofa bed frame (1PC)
- Part 2: Sofa bed frame (1PC)
- Part 3: Sofa bed frame (1PC)
- Part 4: Sofa bed frame (1PC)
- Part 5: Sofa end panel (1PC)
- Part 6: Sofa end panel (1PC)
- Part 9: Back cushion support (1PC)
- Part 10: Seat cushion support (1PC)
- Part 11: Cushions (2PCS)
- Part 12: Support brackets (4PCS)
HARDWARE LIST:
- Hardware A: Bolts (8PCS)
- Hardware B: Bolts (3PCS)
- Hardware C: Washers (18PCS)
- Hardware D: Nuts (15PCS)
- Hardware F: Bolts (4PCS)
- Hardware G: Brackets (6PCS)
- Hardware J: Bolts (12PCS)
Assembly Steps:
Step 1:
Attach Part 1 and Part 2 together using Hardware B (3PCS), Hardware C (6PCS), and Hardware D (3PCS). Ensure the frame is aligned correctly.
Step 2:
Attach the support brackets (Part 12) to the assembled frame using Hardware A (8PCS). Then, attach the remaining frame sections using Hardware C (12PCS), Hardware D (12PCS), Hardware J (12PCS), and Hardware G (6PCS).
Step 3:
Attach the support brackets (Part 12) to the sofa bed frame using Hardware A (8PCS).
Step 4:
Attach the sofa end panels (Part 5 and Part 6) to the frame using Hardware F (4PCS).
Step 5:
Slide Part 6 onto the frame.
Step 6:
Slide Part 5 onto the frame.
Step 7:
Place the back cushion support (Part 9) and seat cushion support (Part 10) onto the assembled frame. Finally, place the cushions (Part 11) onto the supports.