HYSUN POWER
User Guide for HYSUN models including: HY070W2-T1, HY070W2-T2, HY070W2-T1 EV Charger App, EV Charger App, Charger App
1.4 When remotely controlling, make sure that the router is in normal working condition and the device is in standby or working state. the “ x smart ” APP.
il y a 1 jour — EV Charger. APP Operation Manual ... 2.2 Local operation by Bluetooth. 2.2-1. 2.2-2. Click the blue Device and ... the LED brightness, enabling.
Cargador Pared Vehículos Eléctricos GBT Nivel 2 Smart OCPP1.6J 7Kw 32A– Carbone Store Panamá
File Info : application/pdf, 21 Pages, 2.50MB
DocumentDocumentEV Charger APP Operation Manual 1/Download App 1.1 Search for x smart in APP Store (for IOS) or Google play (for android) to download the " x smart " APP. 1.2 Ensure that this device can reliably connect to the router network and that the signal is stable. 1.3 This device supports router frequency of 2.4Ghz. 1.4 When remotely controlling, make sure that the router is in normal working condition and the device is in standby or working state. Download from APP Store Download from Google Play - 1 - 2/Operating Steps 2.1 Register an account for the App following the text prompts. 2.1-1 Click to register 2.1-2 Enter Email and Password, Read and Agree to the privacy policy, and register. - 2 - 2.1-3 Click to verify Email. 2.1-4 After successful verification, log in to your account. - 3 - 2.2 Local operation by Bluetooth 2.2-1 Search nearby Bluetooth devices. 2.2-2 Click the blue Device and Waiting for Connecting. - 4 - 2.2-3 Device is available and start to Charge. 2.2-4 Click on "Start"/ "Stop"allows you to start or stop the charging operation. Click on "Reserve"allows you to select the start time, duration and repeat charging(optional). Click on "Setting"allows you to set the working current, adjust the LED brightness, enabling or disabling plug-and-charge mode, and so on. - 5 - 2.3 Unbundling Charging Station by Bluetooth 2.3-1 Click on "..." at the right top of your phone. 2.3-4 Click on "Unbundling" to unbind Charging Station. - 6 - 3/ Network Options 3.1 Connect to servers by WiFi 3.1-1 Add Device after log in. 3.1-2 Click the blue Device and Waiting for Connecting. - 7 - 3.1-3 Select WiFi Enter the WiFi Password Without Connecting another protocol, Pls click "Confirm" To Connect another protocol, pls Click" Choose another protocol" and setting as below (3.1-4) 3.1-4 Enter Custom protocol info. Click "New configuration" - 8 - 3.1-5 Waiting to config Network. 3.1-6 Config success Enter a name for your Charging Station. Start experience. - 9 - 3.2 Connect to servers by 4G 3.2-1 Add Device after log in. 3.2-2 Click the blue Device and Waiting for Connecting. - 10 - 3.2-3 Select 4G Network Enter the 4G APN if need Without Connecting another protocol, Pls click "Confirm" To Connect another protocol, pls Click" Custom" and setting as below (3.2-4) 3.2-4 Enter Custom protocol info. Click "New configuration" - 11 - 3.2-5 Waiting to config Network. 3.2-6 Config success Enter a name for your Charging Station. Start experience. - 12 - 3.3 Connect to servers by LAN 3.3-1 Add Device after log in. 3.3-2 Click the blue Device and Waiting for Connecting. - 13 - 3.3-3 Select Ethernet Make sure Charging Station is connected to the internet through the Ethernet port. Without Connecting another protocol, Pls click "Confirm" To Connect another protocol, pls Click" Custom" and setting as below (3.3-4) 3.3-4 Enter Custom protocol info. Click "New configuration" - 14 - 3.3-5 Waiting to config Network. 3.3-6 Config success Enter a name for your Charging Station. Start experience. - 15 - 4/ RFID add and delete 4.1 Add RFID Card 4.1-1 Click on"Personal"button at the top left of the homepage to enter the User Center. 4.1-2 Click on "IC management"to access the IC card page. - 16 - 4.1-3 Click on the "Add" button at the bottom. 4.1-4 Place the IC card at the specified location of the Charging station in 30seconds. - 17 - 4.1-5 Wait for the charging station to complete the process, and the addition IC card will be completed. 4.2 Delete RFID Card 4.2-1 Click on"Personal"button at the top left of the homepage to enter the User Center. - 18 - 4.2-2 Click on "IC management"to access the IC card page. 4.2-3 Click on "Unbind" to unbind Charging Station. - 19 - Customer Support For Technical Assistance Call: T: 0086-180-254-31819 E: Sales@hysunpower.com For additional products and information, please visit our website at: www.hysunpower.com.