Trimui TG5040 Smart Pro Handheld Game Console

Unit at a Glance

The Trimui TG5040 features a comprehensive layout of controls and ports:

• Volume
• Host
• Power
• R1
• R2
• L1
• L2
• A Key
• B Key
• X Key
• Y Key
• Dpad
• Joystick
• Start
• Select
• Speaker
• Indicator
• Menu
• 3.5 mm (Headphone Jack)
• TF card (Slot)
• DC/OTG (USB Type-C Port)
• Lanyard Hole
• Microphone

How to Use

How to switch views?

On the simulator page, press START to switch between flow view and grid view.

How to search game?

To search for games across all emulators, press the SELECT button on the emulator page. Alternatively, you can open the menu by pressing the MENU button, select "Search", and press the A button to initiate the search.

How to edit the emulator list?

You can open the menu by pressing the MENU button, select "Edit", and press the A button to initiate edit mode.

To check or uncheck the checkbox, press A. To select the simulator you want to display, check it. To remove the check for the simulator you want to hide, uncheck it.

Press B to display a window asking if you want to save the changes. Select "Ok" and press A to confirm the save and finish editing.

Connectivity

How to start netplay with other people via LAN?

1. Make sure all players have the same game ROM.
2. All players are connected to the same WLAN.
3. All players turn on the netplay function in the "System".
4. Host player enters the game directly.
5. After a while, the slave players will be able to discover the game found on the host in "Netplay". The slave can select it and press A to join the game.

[NOTE] Please wait until the host is playing the game before the slave joins the game. If the host only starts the game but does not play the game, the slave may fail to join the game at this time.

How to start netplay with other people via hotspot?

1. Make sure all players have the same game ROM.
2. Host player opens hotspot, slave players connect to the hotspot.
3. All players turn on the netplay function in the "System".
4. Host player enters the game directly.
5. After a while, the slave players will be able to discover the game found on the host in "Netplay". The slave can select it and press A to join the game.

[NOTE] Please wait until the host is playing the game before the slave joins the game. If the host only starts the game but does not play the game, the slave may fail to join the game at this time.

Unit Detail

FUNCTION KEY: User scene switch

HOST: Accessory

Firmware Update

1. Ensure the device is in shutdown status.
2. Place the firmware update file (Mirror file) in the root directory of the TF card.
3. Insert the TF card into the slot and connect the charging line to enter the charging mode. The device will automatically start up and begin the upgrade process.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specifications

Input Type: DC 5V USB TYPE-C

Internal storage: Built-in 8GB

Play Time: Up to 5 hours

Display: 4.96 inch IPS LCD

Battery: 5000mAh

Speaker: 1 W x2

Included

• Trimui Smart Pro Game Player
• USB Cable
• User Manual

Certifications: FC, CE, ROHS

Assembled in: China

Support

Contact: support@trimui.com

Find more at: www.trimui.com