Fire Alarm Resources | Download fire alarm documents
Owner's Manual for POTTER models including: SSX-81-SSX-81S Armored Siren-Siren Strobe, SSX-81-SSX-81S, Armored Siren-Siren Strobe, Siren-Siren Strobe, Siren Strobe, Strobe
Potter SSSX-81 Series 25W Armored Siren or Siren Strobe - Fire Alarm Resources - Free fire alarm PDF manuals, documents, installation instructions, and technical specifications
File Info : application/pdf, 2 Pages, 1.49MB
DocumentDocumentA Brand SSX-81/SSX-81S ARMORED SIREN/SIREN STROBE · Indoor/outdoor 25 watt armored siren · 127dB sound output · Dual tone: Steady and warble · Rust-free aluminum die-cast housing · Polarized 12VDC input with reverse polarity protection · Dual-action reed tamper switch · Up-front screw terminals for easier field wiring · Suitable with use for most control panels · Mounts directly to the wall or to 4" square back box · 60,000 candle power strobe · Available strobe lens colors: amber, blue, clear, red The SSX-81 is a more powerful version of the SSX-51. The SSX-81 is an indoor/outdoor, self-contained, 25 watt, dual tone armored siren. The full featured siren consists of a dual tone that delivers a steady or warble sound output (steady overrides warble), light weight, rust-proof, aluminum die-cast housing, a 127 dB output siren driver, and a dual action normally open reed plunger switch for normally closed loop. The armored siren does not require additional modules, metal boxes, tamper switches, special tools, or training to install and operate. The SSX-81 series comes completely assembled and ready for installation. The SSX-81S Siren Strobe combination is also available. It is a high quality, high output siren with a 60,000 candle power strobe with available lens colors: amber, blue, clear, and red. The SSX-81 series is ideally suited for noisy, heavy machinery areas, warehouses, loading docks, print shops, busy production floors, or for indoor/outdoor applications where high quality and high output warning is required. Printed Circuit Board Mounting Holes for 4" Square Box Steady and Warble Tone Aluminum Diaphram Gasket Dual Action Reed Switch Die-Cast Aluminum Housing Model Number Input voltage Current Operating Volt- Draw age Range Strobe Specifications Siren Specifications SSX-81 SSX-81SA SSX-81SB SSX-81SC SSX-81SR 6 - 12V DC 12V DC 1.20 Amps 1.31 Amps 4.8 - 14.4V DC 9.6 - 14.4V DC Lens Color Amber Blue Clear Red Strobe Candle Power - 60,000 Flash Rate - Sound Output 20 - 100 127dBA times/ min. Tamper Contact Capacity 0.3A @ 12V DC Operating Temperature Range -4°F - 140°F -20°C - 60°C Potter Electric Signal Co., LLC · St. Louis, MO · Cust Service: 866-240-1870 · Tech Support:866-956-1211· Canada 888-882-1833 · www.pottersignal.com PRINTED IN USA MKT. #8850065 - REV B 2/10 PAGE 1 OF 2 firealarmresources.com A Brand Dimensions: inches (mm) 3 1/2 (90) SSX-81/SSX-81S ARMORED SIREN/SIREN STROBE 5 3/4 (147) 3 3/8 (85.8) 3 1/4 (82) 3 3/8 (85.8) 5 (128) 4 1/4 (108) 4 1/4 (108) 4 7/8 (123) 19/32 Plunger Installation 4 7/8 (123) 19/32 Tamper Plunger 5 (128) 1/2 (14) 7/32 (5.5) 7/32 (5.5) 11/32 (9) Step 1 Separate the housing from the back plate. Step 2 Mount the back plate directly to the wall or to a 4" square box. solderless insulated Step 3 Place the housing over the built-in hook to free your hands during wiring. Step 4 Connect the siren and strobe wires to the terminal strip as indicated above. Rust-free aluminum die-cast. Direct wall mount or to 4" square box. Up-front terminals with dual tamper protection. PRINTED IN USA MKT. #8850065 - REV B 2/10 firealarmresources.com PAGE 2 OF 2