Manuals+

W7 Electric Scooter User Manual

Brand: W7 Electric Scooter

Model: W7 (FCC ID: 2BM88-W7)

Introduction

Welcome to the user manual for the W7 Electric Scooter. This manual provides essential information for the safe and optimal use of your scooter. Please read it carefully and keep it for future reference. Illustrations and user interface descriptions are for reference only; actual product features may vary due to enhancements.

This manual is primarily in English, but original versions were available in English, French, Spanish, German, Italian, and Polish.

Package Contents

Your package should contain the following items:

A visual representation of the package contents would typically show the scooter, a charger unit, a bag of bolts, and a hex wrench.

Product Overview

The W7 Electric Scooter features a sleek design and intuitive controls. Key components are labeled for easy identification:

Diagram Description: The diagram shows an electric scooter. Key parts are numbered:

  • 1: Bell
  • 2: Brake Lever
  • 3: Turn Signal (left/right indicators)
  • 4: Folding Buckle (on handlebar stem)
  • 5: Headlight
  • 6: Folding Latch (mechanism to secure folded stem)
  • 7: Kickstand
  • 8: Display Panel (on handlebar)
  • 9: Throttle & Turn Signal Switch (integrated on handlebar)
  • 10: Underbody Light
  • 11: Charging Port (located on the deck/body)
  • 12: Taillight & Brake Light (rear light that also functions as brake light)
  • 13: Disc Brake (rear wheel brake mechanism)

A zoomed-in view shows the rear wheel and disc brake assembly (13).

Another zoomed-in view shows the handlebar area with controls (8, 9) and the folding mechanism (4).

Quick Setup / Assembly

Follow these steps to assemble your scooter:

  1. Raise the Stem: Lift the stem to the riding position and close the folding latch until it clicks securely.
  2. Connect Handlebar: Attach the handlebar assembly to the stem. Pre-tighten the four bolts, then fully tighten them using the supplied hex wrench.

Diagram Description:

Step 1 shows an arrow indicating lifting the stem (labeled 1 and 2) and closing a latch.

Step 2 shows the handlebar assembly being connected to the stem, with arrows indicating the placement of four bolts (labeled 4) and a hex wrench being used for tightening.

Folding and Unfolding

Folding the Scooter:

  1. Turn the scooter off.
  2. Open the folding latch.
  3. Fold the stem down so that the hook on the rear fender catches the folding buckle on the handlebar.

Diagram Description: The diagram illustrates the folding process. Arrows show:

  • 1: Releasing a latch.
  • 2: Folding the stem down.
  • 3: Hooking the rear fender onto the handlebar buckle.
  • 4: The scooter in its folded state.

Unfolding the Scooter:

  1. Press the folding buckle to release the handlebar from the rear fender.
  2. Lift the stem to the riding position.
  3. Close the folding latch until you hear a click.

Diagram Description: The diagram illustrates the unfolding process. Arrows show:

  • 1: Pressing the folding buckle.
  • 2: Lifting the stem.
  • 3: Closing the folding latch.
  • 4: The scooter in its unfolded, riding position.

About Charging

The scooter is fully charged when the charger indicator changes from red to green.

Diagram Description: The diagram shows the electric scooter connected to a charger. The charger has an indicator light that changes from red (charging) to green (fully charged). The charging port on the scooter is also visible.

Display Information

The display panel provides real-time information about your scooter's status.

Diagram Description: The diagram shows the scooter's display panel with various icons and readouts. Numbers correspond to the following features:

  • 1: Real-Time Speed (e.g., km/h or mph)
  • 2: Speed Unit indicator
  • 3: Riding Mode indicator (e.g., ECO, D, S)
  • 4: Headlight & Taillight status indicator
  • 5: Cruise Control indicator
  • 6: Motor Overheating warning indicator
  • 7: Battery Level indicator
  • 8: App Connected status indicator
  • 9: Error Prompt indicator

Riding Modes and Speed:

The scooter offers different riding modes, each with a maximum speed limit:

Riding Mode Max Speed (European) Max Speed (North American)
ECO 6 km/h 6 mph (10 km/h)
D 15 km/h 18 mph (30 km/h)
S 25 km/h 22 mph (35 km/h)

Error Codes

If an error code appears on the display, consult the table below. Contact the iScooter support team for assistance if needed.

Codes Definition
E10 Communication Fault
E14 Throttle Fault
E15 Brake Lever Fault
E16 Motor Hall Sensor Fault
E50 Over-Voltage

Power Button Operations

The power button controls various functions of the scooter:

Notes:

Specifications

Feature Specification
Model W7
Unfolded Size 1100 x 450 x 1135 mm (43.3 x 17.7 x 44.7 in)
Folded Size 1100 x 450 x 480 mm (43.3 x 17.7 x 18.9 in)
Weight 16.1 kg (35.5 lbs)
Battery Capacity 10.5 Ah
Motor Power 650 W
Wheel 8.5 in. Pneumatic Road Tyres
Range 27-37 miles (25-30 km) *
Max Load Capacity 120 kg (264 lbs) *
Recommended Age 14+
Operating Temperature -2-35 °C (28.4-95°F)
Charger Input AC 100-240 V, 50/60 Hz
Charger Output 42 V, 1.5 A
Charging Time 5-7 h
Waterproof Rating IPX4

* Note on Range: Measured in a laboratory under 100% battery level. Actual range varies based on factors like load, humidity, wind speed, and operation habits.

* Note on Load Capacity: The scooter is designed for a maximum load of 120kg (264lbs). For optimal riding experience, using up to 70% of the maximum load is recommended.

Models: 2BM88-W7, 2BM88W7, W7 Electric Scooter, W7, Electric Scooter, Scooter

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=8277699 福昕高级PDF编辑器打印机 版本 8.0.2.0718