SILVERCREST Universal Charger SLS 2000 B2

Introduction

Image Description: A SILVERCREST Universal Charging Station SLS 2000 B2 is shown. It features a sleek, dark grey design with a lid that can be opened. A smartphone displaying '16:00' and a feature phone are placed on the charging surface. Cables are connected to the devices.

Congratulations on the purchase of your new SILVERCREST Universal Charger SLS 2000 B2. This operating manual is an integral part of the product and contains important information regarding safety, use, and disposal. Please familiarise yourself with all operating and safety instructions before using the product. Use the product only as described and for the specified applications. Retain these instructions for future reference and pass them on with the product to any future owner.

Copyright

This documentation is copyright protected. Any copying or reproduction, including extracts, or reproduction of images, even in an altered state, is not permitted without the express written consent of the manufacturer.

Limited Liability

All technical information, data, and instructions for installation, connection, and operation correspond to the latest information available at the time of printing and are based on the manufacturer's best knowledge and experience. No claims can be derived from the details, illustrations, and descriptions in this manual. The manufacturer assumes no responsibility for damage caused by failure to observe the instructions, improper use, inappropriate repairs, unauthorised modifications, or the use of unauthorised replacement parts.

Warning Notices

The following warning notices are used in this manual:

• ⚠️ WARNING: Indicates a potentially dangerous situation. Failure to avoid it can lead to injuries. Follow directives to avoid personal injury.
• ❗ ATTENTION: Indicates a potential risk of property damage. Failure to avoid it can lead to property damage. Follow directives to avoid property damage.
• ℹ️ NOTICE: Provides additional information to assist with handling the device.

Intended Use

This device is intended exclusively for supplying power to devices with an operating voltage of 5V --- (e.g., mobile phones, tablets, MP3 players). Any other use is considered improper and may lead to damage or injury. Claims for damages resulting from unintended use will not be accepted.

Note on Apple Devices: iPod, iPhone, and iPad are trademarks of Apple Inc. "Made for iPod, iPhone, iPad" signifies that an electronic accessory is specifically designed for connection to an iPod, iPhone, or iPad, and the developer warrants it meets Apple's performance standards. Apple is not responsible for the device's operation or compliance with safety and regulatory standards. Use of these accessories may affect wireless communication integrity.

Safety Instructions

For safe handling of the device, observe the following:

• Check the device for visible external damage before use. Do not operate a damaged or dropped device.
• Damaged cables or connections must be replaced by authorised personnel or customer service.
• This device is not intended for use by individuals (including children) with restricted physical, sensory, or mental capabilities, or lack of experience/knowledge, unless supervised by a responsible person who provides instructions.
• Supervise children when they use the device.
• Protect the device from moisture and liquid penetration. Do not submerge, place near water, or place liquid-filled objects (e.g., vases) on the device.
• The device is intended for indoor use only ?.
• Do not place the device near flammable or explosive materials.
• Do not operate the device near open flames (e.g., candles).
• Avoid placing the device in direct sunlight, as this can cause overheating and irreparable damage.
• Use only the provided power supply unit. Using other units may damage the charging station and/or connected devices.
• Never connect a voltage source or mains power supply to the output sockets of the charging station.
• Disconnect the device from the mains power supply and connected devices before cleaning or when not in use to avoid electric shock risk.
• The mains power supply unit consumes power in standby mode; disconnect it from the mains when not in use.
• Always pull the plug from the wall socket by the power supply unit, not the cord.
• In case of malfunctions or thunderstorms, unplug the power supply unit from the socket.
• The mains power socket must be easily accessible for quick removal in emergencies.

Setting Up and Connecting

⚠️ WARNING: Operating the device can cause personal injury and property damage! Observe safety instructions to avoid dangers:

• Packaging material should not be used by children as a plaything due to suffocation risk.
• Observe set-up location and electrical connection requirements to avoid risks to persons and property.

Package Contents and Transport Inspection

• Charging station SLS 2000 B2
• Mains power supply unit MW5CP52-1GS
• 12 Plug-in connection cables for 5V devices
• This operating manual

ℹ️ NOTICE: Check contents for completeness and visible damage. Contact the service hotline for incomplete deliveries or transport damage.

Unpacking

• Remove all components from the carton.
• Remove all packaging materials from the device.

Disposal of the Packaging

The packaging protects the device from transport damage and is made of recyclable materials selected for environmental friendliness. Recycling packaging saves raw materials and reduces waste. Dispose of packaging materials according to regional regulations.

♻️

Device Description

Image Description: A diagram of the opened SILVERCREST Universal Charging Station SLS 2000 B2. Numbered components are indicated: 1. Operating LEDs (charging station), 2. Connection socket for power supply unit, 3. Retaining device for iPad/Tablets, 4 & 5. USB ports, 6, 7, & 8. Connection sockets for adapter cables, 9. Mains power supply unit, 10. Mains power supply unit operation LED. Also shown are various adapter cables and connectors labelled 11 through 22.

1

Operating LEDs charging station

2

Connection socket for power supply unit

3

Retaining device iPad/Tablets

4

USB port

5

USB port

6

Connection socket for the adapter cable

7

Connection socket for the adapter cable

8

Connection socket for the adapter cable

9

Mains power supply unit

10

Mains power supply unit operation LED

11

Adapter cable Nokia large (MC01)

12

Adapter cable Nokia small (MC28)

13

Adapter cable Sony Ericsson (MC11)

14

Adapter cable Playstation Portable (MC20)

15

Adapter cable Motorola (MC07)

16

Adapter cable Siemens (MC02)

17

Adapter cable Nintendo DS Lite (MC22)

18

Adapter cable Samsung (MC25)

19

Adapter cable Mini USB (MC17)

20

Adapter cable Micro USB (MC19)

21

Adapter cable LG (MC12)

22

iPod/iPhone/iPad cable

Electrical Connection

❗ ATTENTION:

• Before connecting, compare the device's required input voltage (from its rating plate) with the intended voltage source. Data must match to prevent damage.
• Ensure the mains power supply unit's (9) cable is undamaged and not routed across hot surfaces or sharp edges.
• Ensure the mains power supply unit's (9) cable is not stretched or kinked.
• Plug the mains power supply unit (9) into a wall socket. The operation LED (10) will light up.
• Connect the mains power supply unit (9) to the charging station by inserting the plug into connection socket (2) on the rear of the device. The operating LEDs (1) will glow.

Handling and Operation

Preparation

1. Check the maximum input voltage of the device you intend to charge. Refer to the device's operating instructions for this information.
2. When using connector sockets (6-8), ensure the maximum total power consumption does not exceed 1000 mA (approx. 333 mA per socket). USB ports (4+5) can each handle up to 2100 mA. Consult the device's operator manual for details.
3. Determine the required adapter cable for your device (refer to the compatibility table on pages 26-28).

Charging of 5V Devices

1. Remove the cover from the charging station. Connect the plug of the appropriate adapter cable to one of the connection sockets (6-8), or the iPod/iPhone/iPad cable (22) to one of the USB ports (4+5).
2. Replace the cover on the charging station, feeding the adapter cable through the cut-out on the front panel of the cover.
3. Plug the other end of the adapter cable into the device's power supply socket. The device will now receive power from the charging station. If the device has a charge indicator, it will show that charging is in progress.

ℹ️ NOTICE:

• This charging station is powerful enough to use all three connection sockets (6-8) and the USB ports (4+5) simultaneously. However, the total power consumption of connected devices must not exceed 5200 mA (1000 mA total for connection sockets 6-8, and 2100 mA each for USB ports 4+5).
• When charging, iPads or other tablets can be placed in the retaining device (3).

Troubleshooting

Malfunction Causes and Remedies

The following table helps in localising and remedying minor malfunctions:

ℹ️ NOTICE: If malfunctions cannot be resolved with these suggestions, or if other issues occur, please contact the service department.

Cleaning, Storage, and Disposal

Cleaning

⚠️ WARNING: Disconnect the device from the mains power supply and connected devices before cleaning or when not in use to avoid the risk of electric shock.

❗ IMPORTANT: Do not use aggressive cleaning or scouring agents, as they can damage the housing surfaces.

• Use a soft, lint-free cloth for cleaning.

Storage

• Store the device in a dry environment.

Disposal

Do not dispose of the device in your normal domestic waste. This product is subject to European Directive 2002/96/EC (WEEE). Dispose of the device through an approved disposal centre or your community waste facility, observing applicable regulations. Consult your local disposal facility if in doubt.

♻️

Appendix

Technical Data

Charging Station

Mains Plug

Information regarding the EC Conformity Declaration

This device complies with the essential requirements and other relevant provisions of the EMC Directive 2004/108/EC, the Low-Voltage Directive 2006/95/EC, the Eco Design Directive 2009/125/EC (Ordinance 278/2009), and the RoHS Directive 2011/65/EU.

The complete original declaration of conformity can be obtained from the importer.

[CE Mark]

Warranty

A 3-year warranty is provided from the date of purchase. The appliance has been carefully manufactured and inspected. Please retain your receipt as proof of purchase. For warranty claims, contact the Customer Service Department by telephone to ensure free dispatch of goods.

ℹ️ NOTICE: Warranty covers material and manufacturing defects, not transport damage, wear parts, or damage to fragile components (e.g., buttons, batteries). The product is for domestic use only and not for commercial use. Warranty is void in case of abusive handling, force, or unauthorised tampering. Statutory rights are not restricted. Warranty period is not extended by repairs. Damages present at purchase must be reported immediately after unpacking, or within two days of purchase. Repairs after warranty lapse are subject to charge.

Service

Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
IAN 75830

Importer

KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com

Compatibility Table

Image Description: Various connector types are shown with their corresponding adapter cable types and compatible device brands/models.