Garland Master Series Heavy-Duty Even-Heat Hot Top Range
Models
- MST46R-E
- MST46S-E
- MST46T-E
Product Image Description
Image of the Garland Master Series Heavy-Duty Even-Heat Hot Top Range, model MST46R-E, shown with an optional backguard. It features a stainless steel front and sides, with control knobs on the front panel.
Standard Features
- Stainless steel front and sides.
- 6-inch (152mm) chromed steel adjustable legs.
- 7-1/2 inch (191mm) stainless steel front rail.
- Two extra heavy even-heat cast-iron hot top sections with 3 "H" burners; 81,000 BTU (23.72 kW) total.
- Heavy-gauge aluminized steel radiation baffle system.
- Separate control valves for each burner.
- Stainless steel burner box bottom.
- Storage base interior of aluminized steel.
- Piezo spark ignition for oven.
- 40,000 BTU (11.72 kW) natural gas, 35,000 BTU (10.25kW) propane gas cast-iron oven burner.
- Electric Spark ignition on all pilots.
- Sentry total flame failure protection for all burners.
Options & Accessories
- Stainless steel main back.
- Stainless steel common front rail up to 102 inches (2591mm) wide (for 2 or more units in a battery).
- Stainless steel oven interior.
- Convection oven base (add "C" to Model No., e.g., MST46RC-E).
- Additional oven rack.
- Gas regulator 3/4 inch or 1-1/4 inch.
- Rear gas connection, 3/4 inch or 1 inch NPT.
- Gas shut-off valve; 3/4 inch, 1 inch or 1-1/4 inch NPT.
- Gas flex hose & quick disconnect (3/4 inch, 1 inch or 1-1/4 inch NPT x 5') with restraining device (specify).
- End caps and cover (NC, specify).
- Polyurethane non-marking swivel casters (4) with front brakes.
- 6-inch (152mm) stainless steel adjustable legs.
- Dais base (not for use with "RC" oven).
- Storage base shelf of aluminized or stainless steel.
- Stainless steel tubular high shelf, single or double-deck.
- Stainless steel backguard: 10 inch (354mm), 17 inch (432mm) or 33 inch (838mm).
- 230 volt, 50 cycle components, RC motor and/or electric ignition (export).
- Celsius dial for oven thermostat (NC).
Specifications
General Description
Heavy-duty gas range with oven, Model MST46R-E. Features two (2) 17-inch (432mm) even-heat hot tops, rated a total 81,000 BTU (23.72 kW). Includes Sentry total flame failure protection for all burners. The unit is 34 inches (864mm) wide x 38 inches (965mm) deep, including a 7-1/2 inch (191mm) deep stainless steel front rail. The porcelain enamel oven interior is equipped with a 40,000 BTU (11.72 kW) cast-iron oven burner. Stainless steel front and sides. Total BTU output is 121,000 BTU (35.43 kW). Available in Natural or propane gas. Also offered with a storage base with doors (suffix S) and a modular top (suffix T).
Note: Ranges supplied with casters must be installed with an approved restraining device.
Dimensions and Model Specifications
Product | Width (in/mm) | Depth (in/mm) | Height (in/mm) (w/ NSF Legs) | Height (in/mm) (w/o NSF Legs) | Oven/Storage Base Interior: Width (in/mm) | Depth (in/mm) | Height (in/mm) |
---|---|---|---|---|---|---|---|
MST46R-E | 34(864) | 38(965) | 36-3/8(924) | 30-3/8(772) | 26-1/4(667) | 29(737)** | 13-1/2(343) |
MST46S-E | 34(864) | 38(965) | 36-3/8(924) | 36-3/8(924) | 26(665) | 30-1/2(773) | 20-1/2(519) |
MST46T-E | 34(864) | 38(965) | 36-3/8(924) w/stand | 9-1/2 (241) w/o stand* | N/A | N/A | N/A |
*Modular top has 1-1/2" seating flanges. **RC oven is 25" (635mm) deep.
BTU Input (Natural Gas)
Model | Top Section (BTU/kW) | Oven (BTU/kW) | TOTAL (BTU/kW) |
---|---|---|---|
MST46R(C)-E | 81,000 (23.72kW) | 40,000 (11.72kW) | 121,000(35.44kW) |
MST46S-E & MST46T-E | 81,000 (23.72kW) | N/A | 90,000 (23.72kW) |
*** Oven rated 35,000 BTU (10.25kW) for Propane Gas.
Installation Notes
Combustible Wall Clearances
Sides: 11 inches (279mm)
Back: 6 inches (152mm)
Entry Clearances
Crated: 39-1/4 inches (997mm)
Uncrated: 34-1/4 inches (870mm)
Operating Pressure
Natural Gas: 6 inches WC (15mbar)
Propane Gas: 10 inches WC (25mbar)
Gas Input Ratings Note
Gas input ratings shown are for installations up to 2,000 ft. (610m) above sea level. Specify altitudes over 2,000 ft.
Shipping Information
Product | Wt (Lb/Kg) | Cu Ft |
---|---|---|
MST46R-E | 450/205 | 50 |
MST46S-E | 350/159 | 50 |
MST46T-E | 260/118 | 20 |
Electrical Characteristics
Each RC oven: 1/3 HP motor, 120 VAC, single phase, 3.4 amps (includes 6 ft. (1.8m) power cord with NEMA 5-15P plug).
230 VAC export: direct connect, single phase, 50 Hz.
Electrical Spark Ignition: 0.1 amps for 115V 60Hz 1 Phase (includes NEMA 5-15P cord & plug on models without RC oven) and 0.05 amps for 240V 50Hz 1 phase.
Note: Please specify gas type when ordering.
Dimensional Diagram Overview
The diagram illustrates the overall dimensions and connection points of the Garland Master Series Heavy-Duty Even-Heat Hot Top Range. Key dimensions include:
- Overall Width: 34 inches (864mm)
- Overall Depth: 38 inches (965mm)
- Height with NSF Legs: 36-3/8 inches (924mm)
- Height without NSF Legs: 30-3/8 inches (772mm)
- Top Section Depth: 20-3/8 inches (518mm)
- Oven Interior Height: 13-1/2 inches (343mm) for MST46R-E
- Gas Inlet: 1-1/4 inch N.P.T. (32mm) located on the rear.
- Various backguard and high shelf height options are indicated with dimensions like 46-3/4 inches (1187mm) for the 'BG' backguard and 63-3/4 inches (1619mm) for the 'DD' HI SHELF.
- The diagram also shows clearances for DAIS Mounting (minimum 3 inches / 75mm, maximum 5 inches / 133mm) and vermin proofing.
Company Information
Garland Commercial Ranges Ltd.
1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA
General Inquiries: 1-905-624-0260
USA Sales, Parts and Service: 1-800-424-2411
Canadian Sales: 1-888-442-7526
Canada or USA Parts/Service: 1-800-427-6668
Website: www.garland-group.com
Document Reference: 6927B, Revision: 07/25
Part of the Welbilt family, an Ali Group Company.