PDP Joy-Con Charging Grip Plus

Quick Start Guide

CLASS B EQUIPMENT: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Items Included

A: Charging Grip
B: USB Type C Charging Cable
C: Quick Start Guide

Installation

Attaching Joy-Con Controllers

Follow the steps below to install your Joy-Con controllers into the Joy-Con Charging Grip Plus:

Take the empty grip out of the box and locate the latch on the top.
Slide it to the right to release the hatch.
Take a Joy-Con controller and align the rail on the side with the groove on the inside of the grip.
Slide down until the bottom of the controller is flush with the bottom of the charging grip.
Repeat these steps with the other Joy-Con controller.
Once both controllers are in the grip, lift the hatch up towards you and then press the hatch down until you hear a small click. The Joy-Con controllers will then be secured in the grip and ready to use.

Charging

Charging Your Joy-Con Controllers

To charge your Joy-Con controllers using the Joy-Con Charging Grip Plus, ensure both controllers are secured in the grip and simply connect the included USB Type C cable into the charging port (located on top of the grip). Then, plug the other end of the USB Type C cable into a USB port.

The LED Charging indicators will begin flashing and show the respective charge status of each Joy-Con controller. Once fully charged, the lights will remain solid.

Removal

Detaching Joy-Con Controllers

Follow the steps below to remove your Joy-Con controllers from the Joy-Con Charging Grip Plus:

Slide the latch, on top of the charging grip, to the right and then push the hatch down.
Push the controllers halfway up from the bottom, then pull the rest of the way out from the top.
Repeat these steps to remove the other Joy-Con controller.

Warranty and Legal Information

2-Year Limited Manufacturer's Warranty

Coverage and Term: PDP warrants that this product will be free from manufacturing defects for two years from the original date of purchase. Manufacturing defects are those defects in materials and/or workmanship, subject to final determination by PDP’s customer service department. This warranty applies only to original purchasers with a valid proof of purchase from an authorized PDP retailer that clearly shows the date of purchase.

Exclusive Remedy and Exclusions: The exclusive remedy for valid claims will be the replacement, or refund of the product. This warranty does not cover defects caused by accidents, improper or abusive use of the product, unauthorized or improper modifications, repairs, or handling.

How to Get Service: Purchasers with product issues should not return the product to the store, but instead contact PDP’s customer service department first. You can contact PDP customer service by phone at 1-800-331-3844 (US and Canada only), Monday to Friday from 8 AM to 6 PM PST. International customers can contact us by phone at +442036957905. You can always reach us, 24/7, by visiting support.pdp.com and clicking the "Submit a Request" button top right of the page to open a support ticket. Inquiries are typically answered within 24 business hours.

Your Rights Under Applicable Law: This warranty does not affect the legal rights of customers under applicable state, provincial, or national laws governing the sale of consumer goods.

Additional Information for Australian Consumers: PDP products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given to you under our express warranty are in addition to other rights and remedies you have under the Australian Consumer Law and other laws.

Company Information & Trademarks

This product is manufactured and imported by Performance Designed Products LLC. Designed in the U.S.A. by PDP. Made in China.

Please keep this information for future reference.

Contact & Support

Website: www.pdp.com

Support: support.pdp.com

Customer Service (US/Canada): 1-800-331-3844

Customer Service (International): +442036957905

Patents

US Patents/Brevets aux É.-U.: www.pdp.com/patents

Addresses

4225 W Buckeye Rd #2, Phoenix, AZ 85009, USA

Herikerbergweg 88, 1101 CM Amsterdam, Netherlands

GPO Box 457 Brisbane, QLD 4001, Australia

Tower 42, 25 Old Broad Street, London, EC2N 1HQ, UK

	PDP REMATCH Wired Controller for Nintendo Switch: Quick Start Guide Concise guide to setting up and using the PDP REMATCH Wired Controller for Nintendo Switch, covering initial setup, audio, volume, and back button programming.
	PDP Afterglow Wave Wireless Controller Quick Start Guide A quick start guide for the PDP Afterglow Wave Wireless Controller for Nintendo Switch, covering pairing, charging, button programming, and lighting customization.
	REALMz™ Wired Controller Quick Start Guide for Nintendo Switch Quick start guide for the REALMz™ Wired Controller for Nintendo Switch. Learn setup, audio, volume, and LED lighting features.
	Afterglow Wireless Deluxe Controller for Nintendo Switch: Quick Start Guide & Setup Learn how to set up, pair, charge, program back buttons, and customize lighting for your Afterglow Wireless Deluxe Controller for Nintendo Switch. Includes warranty and safety information.
	Afterglow Wireless Deluxe Controller for Nintendo Switch - Quick Start Guide & Features \| PDP Get started with your PDP Afterglow Wireless Deluxe Controller for Nintendo Switch. Learn how to pair, charge, customize lights, program back buttons, and understand the limited warranty.
	PDP REALMz Wireless Plus Controller Quick Start Guide A quick start guide for the PDP REALMz Wireless Plus Controller for Nintendo Switch, covering pairing, reconnecting, charging, LED lighting modes, and programming back buttons.
	PDP Rock Candy Wired Controller for Nintendo Switch Quick Start Guide This guide provides instructions for setting up and using the PDP Rock Candy Wired Controller for Nintendo Switch. It includes warranty information and contact details for customer support.
	PDP AIRLITE Wired Headset for Nintendo Switch: Quick Start Guide Get started quickly with the PDP AIRLITE Wired Headset for Nintendo Switch. This guide covers initial setup, connecting the headset, mic mute, audio controls, and warranty information.