Esatto EHPD80 8kg Heat Pump Dryer
Quick Start Guide
Ready? Let's load up your EHPD80 8kg Heat Pump Dryer!
This guide provides essential information to help you get started with your new Esatto EHPD80 8kg Heat Pump Dryer.
Installation & First Use
Before installing your new Heat Pump Dryer, please ensure you have read all safety instructions in the user manual.
Installation
Place the dryer on a firm and level surface for quiet and safe operation. If you wish to stack your dryer above your washing machine, you must purchase a stacking kit and ensure it is installed by a qualified person. Please make sure that there is sufficient ventilation and it is not placed in an area where dirt will accumulate.
Before Using Your Dryer for the First Time
- Ensure the appliance is correctly installed as per the installation instructions in your User Manual (Page 9).
- Leave the appliance to stand for 2 hours after transportation.
- Prepare the dryer by running one cycle as per the instructions in your User Manual (Page 11).
Quick Start Instructions
- Plug in your dryer. [Power plug icon]
- Close the door. [Door closing icon]
- Select the desired program and any additional functions required. [Program selection icon]
- Load wet laundry into the drum. [Laundry loading icon]
- Press the On button. [On button icon]
- Press the Start button, and you will see the time remaining on the display screen. [Start button icon]
For detailed operation instructions, refer to your User Manual (Pages 11-14).
Get In Touch
Need help? Contact the Esatto support team via the contact details below.
Phone: 1300 11 4357
Email: support@residentiagroup.com.au
How was your Esatto experience? Share your story at esatto.house/review.
Product Details
Dimensions (W, D, H mm): 595 x 650 x 845
Capacity: 8kg
Warranty: 2 Years
