Monster Airmars XKT10 Bluetooth Wireless Headphones

Product Parameters

Packing List

• Headphones *2
• Charging Case *1
• Instructions Manual *1
• Type-C Charging Cable *1

Product Operating Instructions

1. Power on: Open the charging case, the headphones will turn on automatically.
2. Power off:
   Method 1: Put the headphones into the charging case and close the cover.
   Method 2: After disconnected from the Bluetooth device for 3 minutes.
3. Pairing:
   Method 1: Open the charging case, the headphones will start pairing automatically.
   Method 2: Search and click for "Monster Airmars XKT10" on the Bluetooth list of the smart device. When connection is successful, "Connected" will be heard.
   * Headphones will try reconnecting to the device within 3 minutes when connection is lost.

Indicator Guide

Product Schematic Description

Headphones:

• MFB (Multi-function button)
• Type-C interface

Charging case:

• Indicator lights
• Type-C interface

Indicator Lights:

• Charging case low power: Red light flashes quickly
• Charging case charging: The red indicator light flashes slowly
• Charging case fully charged: Red indicator lights up

Operations

• Voice assistant: Press the left MFB for 2 seconds.
• Volume +: Click right MFB.
• Volume: Click left MFB.
• Pause/Play: Double click Left/Right MFB.
• Last song: Triple click left MFB.
• Next song: Triple click right MFB.
• Answer call: Double click the left/right MFB.
• Reject call: Press left/right MFB for 2 seconds.
• Hang up call: Double click the left/right MFB.
• Game/music switching: Press right MFB for 2 seconds to enter game mode. Press right MFB for 2 seconds to enter music mode.

Precautions

• Headphones will turn on automatically, pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed.
• Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
• Keep battery (battery pack) away from inflammables or excessive heat such as direct sunlight.
• Intermittent sound is normal during playback for wireless products due to environmental factors, device brand, users' behavior, etc.

Warnings

• Do not use headphones at high volume for an extended period of time.
• Keep the headphones away from dust and water.
• Do not disassemble the headphones and accessories, otherwise warranty will be voided.
• Keep headphones away from any impact or vibration.
• Do not use any chemical solvents or cleaning agent on the headphones.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

User info:

• User name:
• Contact number:
• Mailing address:
• Email:
• Postal code:

Product information:

• Product name: Monster Airmars XKT10
• Product number:
• Product barcode / Serial number/Batch number:
• Sales date:
• Invoice number:

Vendor information:

• Name:
• Address:
• Contact number:
• Postal code:

Remark:

• Fully charge the headphones and power off before an intended not-in-use period.
• Unplug the charging cable after charging.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2A8PV-QSMXKT10

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Hazardous Substances

This table is compiled according to SJ/T 11364.

10 Environment Friendly Use Period (EFUP)

This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical products will not leak or mutate so that the use of these substances will not result in any severe environmental pollution, any bodily injury or damage to any assets.

Restore factory settings

Either headphones is not connected to the Bluetooth device when turned on, click the MFB 3 times to clear the previous pairing information and turn off.

Certificate of Approval

Product No:

Production Time:

QC: