TOPDON ArtiLink 400 User Manual

About the ArtiLink 400

The TOPDON ArtiLink 400 is a versatile OBD II & EOBD scan tool designed to help you diagnose and understand your vehicle's issues. It can turn off check engine lights, clear codes, reset monitors, and provide detailed insights into your car's emission systems. Compatible with most vehicles from 1996 onwards, it's an essential tool for both DIY enthusiasts and professional mechanics.

Key Features

• Read and clear Diagnostic Trouble Codes (DTCs).
• Monitor I/M Readiness status.
• View live data streams and freeze frame data.
• Perform O2 Sensor and EVAP System tests.
• Access comprehensive vehicle information.

Safety First

Always prioritize safety when using the ArtiLink 400. Ensure proper ventilation, avoid smoking or open flames, wear safety goggles, and handle the device with care to prevent damage from heat or improper connections. Refer to the manual for detailed safety precautions.

Getting Started

1. Turn off the ignition.
2. Locate the vehicle's 16-pin Data Link Connector (DLC).
3. Connect the ArtiLink 400's connector to the DLC.
4. Turn on the ignition. The scanner will automatically link to the vehicle.

Support and Resources

For further assistance or support, please visit the official TOPDON website at www.topdon.com or contact their support team via email at support@topdon.com or by phone at 1-833-629-4832 (North America).