Grandstream Networks - Networking & Unified Communications
Instructions for GRANDSTREAM models including: DP750, DP752, DP755, DP720, DP722, DP725, DP730, DP735, DP750 VoIP DECT Phone, DP750, VoIP DECT Phone, DECT Phone
want to transfer the call to, then press Dial Key 3. Once second call is established, press Transfer. 3-WAY CONFERENCE 1. During an established call, press “Left Softkey” to
File Info : application/pdf, 2 Pages, 493.17KB
DocumentDocumentDP725
DP722
DP720
DP750
DP752/DP755
DP735
DP730
Grandstream Networks, Inc.
DP750/DP752/DP755 - Base Stations
DP720/DP722/DP725/DP730/DP735 Handsets
VoIP DECT Phone Quick User Guide
For detailed information please consult DP55/DP752/DP750 & DP735/DP730/ DP722/DP720/DP725 administration or
user guides available at:
www.grandstream.com
©2024 Grandstream Networks, Inc. All rights reserved. Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. Information in
BASIC OPERATIONS
UNREGISTER THE DP HANDSET
1. On DP handset, press "Menu" .
TURNING THE HANDSET ON / OFF
To turn ON the handset
· Long press on Power Key until the LCD screen lights up.
To turn OFF the handset
· Long press on Power Key again when the handset is idle until the display turns off.
1. On DP handset, press "Menu" . 2. Press arrow keys to move the cursor to Registration. 3. Navigate to Deregister. 4. Select the Handset to be unregistered and press "Deregister". 5. Enter the system PIN code (default: 0000). 6. Press "Done" to confirm or "Back" to cancel.
2. Use arrow keys to reach Settings
>
System Settings.
3.Navigate to "Change Base Pin"
4. Enter current base PIN code (Default is 0000).
5. Enter the desired base code PIN.
6. Press "Save" softkey to confirm.
SELECTING THE MENU LANGUAGE
REGISTERING HANDSET TO DP75X BASE
STATION
CHECKING BASE STATION IP ADDRESS
1. On DP handset, press "Menu" .
2. Use arrow keys to reach Settings
>
Single Base Station
1. On DP750/DP752/DP755 Base Station, press and hold Radio/Page button for about 8 seconds until radio LED starts blinking; or, access web UI > Status > DECT Status and press Subscribe button.
2. On handset, Press "Menu" . 3. Use arrow keys to reach "Registration". 4. Navigate to "Register", then press "Select" while the DP750/DP752/DP755 radio icon is blinking. 5. Select the corresponding base, and then press "Subscribe". 6. DP handsets will display Easy Pairing on the LCD and play an audible buzz when subscribed.
Multiple Base Stations
1. Press Menu
.
2. Use arrow keys to reach Registration.
3. Select Register.
4. Navigate to an unsubscribed base using arrow
keys, and click on Subscribe.
5. Make sure that the subscription is opened on the
new base station.
Switching between different base stations
1. Press Menu 2. Use arrow keys to reach Registration . 3. Navigate to Select Base using arrow keys. 4. Select the desired base station and press Select.
1. On DP handset, press "Menu" .
2. Use arrow keys to reach Status > Base Status.
3. Press "Select" softkey to display Info page, browse the screen to find IP address, subnet mask and default gateway information for your DP base station.
HANDSET SETTINGS
SETTING THE KEY LOCK
To enable the keypad lock
1. Press and hold the pound key #
for
approximately 2 seconds.
2. DP handset screen will show "Keypad Locked"
message briefly and key lock icon will appear.
To disable the keypad lock
1. Press and hold the pound key #
for
approximately 2 seconds to unlock the keypad.
2. DP handset screen will show "Keypad Unlocked"
message.
EDITING THE HANDSET'S NAME
1.On DP handset, press "Menu" .
2. Use arrow keys to reach Settings
> Handset
Name.
3. Enter the desired name and press "Save" softkey.
CHANGING THE BASE PIN
Phone Language.
3. Choose the desired language and press "Select" softkey. 4. Press "Yes" softkey to confirm.
DATE AND TIME
1. On DP handset, press "Menu"
.
2. Use arrow keys to reach Settings
> Date
and time .
3. Edit current values in date/time fields (you can
change date/time format using left and right arrow
keys) and then press "Set" softkey.
4. Press "Save" softkey to confirm.
CALL FEATURES
ACTIVATE / DEACTIVATE HANDS-FREE MODE
1. Press
or (Hands-free key) while making
a call or on the idle screen to activate.
2. Press again to deactivate.
MAKING CALLS
Method 1
Using default outgoing line
1. Enter desired number to dial using keypad buttons.
2. Press Dial key or Speaker key
to
initiate the call.
Selecting outgoing line to use
1. Enter desired number to dial using keypad buttons. 2. Press "Line" softkey. 3. Select a line from available lines displayed on the screen to use for dialing out.
Method 2
1.Press Dial key or Speaker key
.
2. Enter desired number to dial using keypad
buttons.
3. Press Dial key or wait for 4 seconds and
the call will be initiated automatically.
ANSWERING CALLS
Press Dial Key or Hands-free key
or
"Left softkey" ("Answer" ) to answer incoming
call .
ENDING CALLS
Press On-hook key
to terminate the call.
HOLD/RESUME CALLS
1. During an established call, press (right softkey), or Press Left softkey followed by Hold, The call will be put on Hold. 2. To resume the call, press right softkey again to Unhold.
CALL TRANSFER
Blind transfer
1. During an established call, press (left softkey)
to access Options > Blind Transfer. The initial
call will be on hold.
2. Enter the number to transfer the call to.
3. Press Dial key to complete transfer.
Attended
Transfer
1. During
an established call, press
(left softkey) to access Options > Attended
Transfer. The initial call will be on hold.
2. Choose the line and enter the number you
want to transfer the call to, then press Dial Key 3. Once second call is established, press Transfer.
3- WAY CONFERENCE
1. During an established call, press "Left Softkey" to access Options > Conference. The initial call will be on hold. 2. Enter the number of the second party you want to add to the conference and press Dial key
MUTE/UN-MUTE MICROPHONE
1. Press
(Mute key) to switch off the
microphone during an established call. Mute icon
will be displayed on the screen.
2. Press
again to switch microphone back on.
ACTIVATE CALL WAITING
1. Press "Menu" .
2. Use arrow keys to reach Call Features
>
Call waiting.
3. Select the account for which you want to enable /
disable the call waiting feature, and press "Select"
softkey.
4. Select Enabled and press "Save" to confirm.
ACTIVATE DO NOT DISTURB MODE
1. Press "Menu" .
2. Use arrow keys to reach Call Features > Do Not Disturb. 3. Select the account for which you want to enable DND feature, and press "Select" softkey. 4. Select Enabled and press "Save" to confirm.
ACTIVE CALL FORWARD
1. Press "Menu" .
2. Use arrow keys to reach Call Features
>
Call Forward.
3. Select the account for which you want to enable/
disable the call forward feature and then press
"Select" softkey. 4. Select the type of call forwarding (all, on busy, or no answer) and enter destination number, then press "Save" softkey to confirm.
2. Access to Voice Mail
and then select
Play Message sub menu.
3. Select the account to retrieve your voice
messages saved on your voice mail.
DIRECT IP CALL
Direct IP calling allows two parties, that is, a handset and another VoIP device, to talk to each other in an ad hoc fashion without a SIP proxy. Elements necessary to complete a Direct IP Call:
· Both DP72x/DP73x and other VoIP Device,
have public IP addresses, or
· Both DP72x/DP73x and other VoIP Device are
on the same LAN using private IP addresses, or Both DP72x/DP73x and other VoIP Device can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ).
Users can perform IP calls using Star code following the below steps:
1. Pick up the handset and press Dial key
.
2. Dial *47 followed by the target IP Address.
Note: You can enter directly *47 + target IP address, and then press the dial key to initiate the call.
SPEED DIAL
1. Press Menu
to bring up operation menu.
2. Access to Shortcut and then to Speed Dial
sub-menu.
3. Choose the digit keys (2-9) and press Assign
to specify the number (from the shared directory)
to be as speed dial. You can press Edit or Clear
Entry softkeys to modify/delete a speed dial key .
4. Once configured, hold press on the according
key to make the speed dial call.
PLAY VOICE MAIL MESSAGES
1. Press "Menu" to bring up operation menu.