VAPPEBY Portable Bluetooth Speaker

Product Overview

The VAPPEBY is a portable, waterproof Bluetooth speaker designed for outdoor use.

Key Components:

• 1. Power/Play/Pause Button: Used for turning the speaker on/off and controlling music playback.
• 2. LED Status Light: Indicates the speaker's operational status (pairing, connected, battery level, charging).
• 3. USB-C Port: For charging the speaker.

LED Status Indicators:

• Flashing White: Bluetooth pairing mode.
• Solid White: Successfully paired to a device.
• Flashing Red: Low battery.
• Solid Red: Charging (when speaker is off).

Getting Started

Charging: Connect a USB-C cable to the speaker's input port and the other end to a power source (e.g., computer, power adapter). Charge the product before first use and whenever the LED flashes red to indicate low battery. The LED will show solid red while charging (if the speaker is off) and will turn off when fully charged.

Recommended Power Supply: 5.0 VDC, 1.0 A (not included).

Speaker Functions

• Turning On/Off: Press and hold the Power button (1) for more than 1.5 seconds.
• Play/Pause: A short press (<1.5 seconds) on the Power button (1) will play or pause music.
• Auto-off: The speaker automatically turns off after 5 minutes if no device is paired, or after 20 minutes if paired but no music is playing.

Bluetooth Pairing

To pair your speaker with a source device (smartphone, tablet, etc.):

1. Ensure the speaker is powered on. It will automatically enter Bluetooth pairing mode on first use or if a previously paired device cannot be found.
2. On your source device, open the Bluetooth settings.
3. Select "VAPPEBY Portable" from the list of available devices to connect.

Stereo Pairing

You can pair two VAPPEBY speakers together for stereo sound:

1. Ensure both speakers are powered on and in Bluetooth search mode.
2. Double-press the power button on one of the speakers. A sound will confirm successful stereo pairing.
3. Connect your source device to the stereo-paired speakers by following the standard Bluetooth pairing instructions.

Good to Know

• The speaker is designed for outdoor use and is protected against dust and water according to IP67.
• If the speaker's front protection becomes soaked with water, acoustic performance may be temporarily affected but will return to normal once dry.
• The device and battery may become warm during charging; this is normal and they will cool down gradually.
• Charging time can vary based on battery capacity, charge level, battery age, and ambient temperature.
• USB cable length and quality can affect charging speed and performance.
• Storage temperature: -20°C to 25°C (-4°F to 77°F).
• Unplug the product from the power supply before cleaning and when not in use.
• Avoid leaving the battery discharged for extended periods.
• Do not charge the battery while it is in contact with flammable materials like textiles.

Safety Warnings

• Excessive volume can damage hearing.
• Do not charge the product if it is wet.
• Charge the product indoors only.
• Do not use a defective power supply or USB cable for charging, as this can damage the product and your devices.
• Never install the product in a confined space.
• Always ensure at least 5 mm of space around the product for ventilation.
• Do not modify, disassemble, open, drop, crush, puncture, or shred the battery.
• Do not expose the battery to rain or water.
• Risk of fire and burns: Do not heat the battery above 60°C (140°F) or incinerate it.
• Keep the battery away from open flames, direct sunlight, and high-voltage devices to prevent heat buildup.
• This product is not a toy. Ensure all users read and follow these warnings and instructions.
• Do not short-circuit the battery or its cells.
• In case of battery leakage, prevent liquid from contacting skin or eyes.

Care and Servicing

• Cleaning: Wipe the product with a soft, damp cloth. Dry with another soft, dry cloth. Avoid abrasive cleaners or chemical solvents.
• Servicing: Do not attempt to repair the product yourself. Opening covers may expose you to dangerous voltage. Product disassembly and battery removal should only be performed by a qualified professional at the end of the product's life cycle.

Technical Data

• Model Name: VAPPEBY PT
• Type Number: E2133
• Battery Capacity: 3.6 V, 2600 mAh, 9 Wh, Li-ion
• Input: 5.0V DC, 1.0A, 5.0W USB-C
• Estimated Battery Play Time (50% volume, Bluetooth): 80 hours
• Operating Temperatures: 0°C to 40°C (32°F to 104°F)
• Operating Humidity: 0 to 95% RH
• Operating Frequency: 2400-2483.5 MHz
• Radio Output Power: 4 dBm (EIRP)
• IP Class: IP67
• Manufacturer: IKEA of Sweden AB
• Address: Box 702, SE-343 81 Älmhult, SWEDEN

Regulatory Information

This device complies with Part 15 of the FCC Rules and relevant Canadian regulations. Operation is subject to conditions that prevent harmful interference.

FCC/IC Compliance Notes:

• This equipment has been tested and found to comply with Class B digital device limits.
• Any unauthorized modifications could void the user's authority to operate the equipment.
• The device may cause radio frequency interference; users should try to correct it by reorienting the antenna, increasing separation, or using a different circuit.

Disposal: The crossed-out wheeled bin symbol indicates that the product should be recycled separately from household waste according to local environmental regulations. This helps reduce waste and minimize environmental impact.

Bluetooth® Trademark Information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. IKEA uses these marks under license. Other trademarks and trade names belong to their respective owners.