PRG-MUL2 - InventronicsApplication Notes - Inventronics
User Manual for inventronics models including: ESM-880S280MGS 880W Programmable Driver with INV Digital Dimming, ESM-880S280MGS, 880W Programmable Driver with INV Digital Dimming, Programmable Driver with INV Digital Dimming, Driver with INV Digital Dimming, INV Digital Dimming, Digital Dimming, Dimming
Horticulture LED Drivers - Inventronics
File Info : application/pdf, 16 Pages, 926.52KB
DocumentDocumentESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming Features Panel Mount Connectors Facilitates Installation Brackets Accommodates Variety of Hanging Applications Ultra High Efficiency (Up to 96%) Full Power at Wide Output Current Range (Constant Power) Adjustable Output Current (AOC) with Programmability Isolated 0-10V/PWM/3-Timer-Modes Dimmable Adjustable Dimming Curve INV Digital Dimming, UART Based Communication Protocol Dim-to-Off with Standby Power Minimum Dimming Level with 5% or 10% Selectable Hold Time Adjustable Fade Time Adjustable Always-on Auxiliary Power: 12Vdc, 250mA Low Inrush Current Output Lumen Compensation End-of-Life Indicator Input Surge Protection: DM 6kV, CM 10kV All-Around Protection: IUVP, IOVP, OVP, SCP, OTP IP66/IP67 and UL Dry/Damp/Wet Location TYPE HL, for Use in a Class I, Division 2 Hazardous (Classified) Location 5 Years Warranty Description The ESM-880SxxxMGS series is an 880W, constant-current, programmable and IP66/IP67 rated LED driver that operates from 249-528Vac input with excellent power factor. Created for many lighting applications including high mast, sports, UV-LED, aquaculture and horticulture, etc. It provides an auxiliary voltage and dim-to-off functionality for powering low voltage, wireless controls. The dimming control supports 0-10V dimming as well as two-way communication via Digital Dimming, a UART based communication protocol. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, input under voltage, input over voltage, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range(A) Full-Power Default Current Output Range(A)(1) Current(A) Output Voltage Range(Vdc) Max. Output Power(W) Typical Efficiency(2) Typical Power Factor 277Vac 480Vac Model Number(3) 0.195-2.8 1.95-2.8 2.1 157-452 880 96.0% 0.99 0.96 ESM-880S280MGS 0.300-4.2 3.0-4.2 4.2 104-294 880 95.5% 0.99 0.96 ESM-880S420MGS 0.490-7.0 4.9-7.0 5.6 63.0-180 880 96.0% 0.99 0.96 ESM-880S700MGS 0.800-11.5 8.0-11.5 8.4 38.0-110 880 95.0% 0.99 0.96 ESM-880S11AMGS(4) 1.630-20.0 16.3-20.0 20.0 22.0-54 880 95.5% 0.99 0.96 ESM-880S20AMGS(4) Notes: (1) Output current range with constant power at 880W. (2) Measured at 100% load and 480Vac input (see below "General Specifications" for details). Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 1 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming (3) Certified voltage range: UL, FCC 277-480Vac; otherwise 277-400Vac. (4) SELV output Output Voltage(V) Output Voltage(V) I-V Operating Area ESM-880S280MGS 546 455 (195, 452) (1170 , 452 ) (10%Ioset, 880/Ioset) 364 273 (1950 , 452 ) (Ioset, 880/Ioset) (2800 , 314 ) 182 91 0 0 (280, 157) (2800 , 189 ) (2800, 157) (Ioset, 157 ) Good Performance Area Programmed Operating Area Allowed Operating Area 560 1120 1680 2240 2800 Output Current (mA) Note : 1950mAIoset2800mA 3360 ESM-880S420MGS 354 295 (300, 294) (1800 , 294 ) (10%Ioset, 880/Ioset) 236 177 (3000 , 294 ) (Ioset, 880/Ioset) (4200 , 210 ) 118 59 0 0 (420, 104) (4200 , 126 ) (Ioset, 104 ) (4200, 104) Good Performance Area Programmed Operating Area Allowed Operating Area 840 1680 2520 3360 4200 Output Current (mA) Note : 3000mAIoset4200mA 5040 Output Voltage(V) Output Voltage(V) ESM-880S700MGS 216 180 (490, 180) (2940 , 180 ) (10%Ioset, 880/Ioset) 144 108 (4900 , 180 ) (Ioset, 880/Ioset) (7000 , 126 ) 72 36 0 0 (700, 63) (7000 , 75 ) (Ioset, 63 ) (7000, 63) Good Performance Area Programmed Operating Area Allowed Operating Area 1400 2800 4200 5600 7000 Output Current (mA) Note : 4900mAIoset7000mA 8400 ESM-880S11AMGS 132 110 (800, 110) (4800 , 110 ) (10%Ioset, 880/Ioset) 88 66 (8000 , 110 ) (Ioset, 880/Ioset) (11500 , 77 ) 44 22 0 0 (1150, 38) (11500 , 46 ) (11500, 38) (Ioset, 38 ) Good Performance Area Programmed Operating Area Allowed Operating Area 2300 4600 6900 9200 11500 Output Current (mA) Note : 8000mAIoset11500mA 13800 ESM-880S20AMGS 66 55 (1630, 54) (9780 , 54 ) (10%Ioset, 880/Ioset) 44 (16300 , 54 ) (Ioset, 880/Ioset) (20000 , 44 ) Output Voltage(V) 33 22 11 0 0 (2000, 22) (20000 , 26 ) (Ioset, 22 )(20000, 22) Good Performance Area Programmed Operating Area Allowed Operating Area 4000 8000 12000 16000 20000 Output Current (mA) Note : 16300mAIoset20000mA 24000 Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 2 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Input Specifications Parameter Input AC Voltage Input DC Voltage Input Frequency Leakage Current Input AC Current Inrush Current(I2t) PF THD Rev.B 880W Programmable Driver with INV Digital Dimming Min. 249 Vac 352 Vdc 47 Hz - 0.90 - Typ. - Max. Notes 528 Vac 500 Vdc 63 Hz 0.75 MIU 0.70 mA 3.79 A 2.16 A 1.98 A2s 20% UL 8750; 480Vac/60Hz IEC 60598-1; 480Vac/60Hz Measured at 100% load and 277 Vac input. Measured at 100% load and 480 Vac input. At 480Vac input, 25C cold start, duration=6.6 ms, 10%Ipk-10%Ipk. At 277-480Vac, 50-60Hz, 60%-100% Load (528-880W) Output Specifications Parameter Min. Output Current Tolerance Output Current Setting(Ioset) Range ESM-880S280MGS ESM-880S420MGS ESM-880S700MGS ESM-880S11AMGS ESM-880S20AMGS Output Current Setting Range with Constant Power ESM-880S280MGS ESM-880S420MGS ESM-880S700MGS ESM-880S11AMGS ESM-880S20AMGS Total Output Current Ripple (pk-pk) Output Current Ripple at < 200 Hz (pk-pk) Startup Overshoot Current No Load Output Voltage ESM-880S280MGS ESM-880S420MGS ESM-880S700MGS ESM-880S11AMGS ESM-880S20AMGS Line Regulation -5%Ioset 195 mA 300 mA 490 mA 800 mA 1630 mA 1950 mA 3000 mA 4900 mA 8000 mA 16300 mA - - - - Load Regulation - Turn-on Delay Time - Typ. - - 5%Iomax - - - - - Max. 5%Ioset 100% load Notes 2800 mA 4200 mA 7000 mA 11500 mA 20000 mA 2800 mA 4200 mA 7000 mA 11500 mA 20000 mA 10%Iomax 100% load, 20 MHz BW 2%Iomax 70%-100% load 10%Iomax 100% load 500 V 350 V 200 V 120 V 60 V ±0.5% ±1.5% 0.5 s 100% load Measured at 277-480Vac input, 60%100% Load Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 3 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming Output Specifications (Continued) Parameter Min. Typ. Temperature Coefficient of Ioset 12V Auxiliary Output Voltage 12V Auxiliary Output Source Current 12V Auxiliary Output Transient Peak Current@6W 10.8 V 0 mA - 0.03%/C 12 V - - 12V Auxiliary Output Transient Peak Current@10W - - Max. - 13.2 V 250 mA 500 mA 850 mA Notes Case temperature = 0C ~Tc max Return terminal is "Dim-" 500mA peak for a maximum duration of 2.2ms in a 6.0ms period during which time the average should not exceed 250mA. 850mA peak for a maximum duration of 1.3ms in a 5.2ms period during which time the average should not exceed 250mA. General Specifications Parameter Efficiency at 277 Vac input: ESM-880S280MGS Io= 1950 mA Io= 2800 mA ESM-880S420MGS Io= 3000 mA Io= 4200 mA ESM-880S700MGS Io= 4900 mA Io= 7000 mA ESM-880S11AMGS Io= 8000 mA Io= 11500 mA ESM-880S20AMGS Io= 16300 mA Io= 20000 mA Efficiency at 400 Vac input: ESM-880S280MGS Io= 1950 mA Io= 2800 mA ESM-880S420MGS Io= 3000 mA Io= 4200 mA ESM-880S700MGS Io= 4900 mA Io= 7000 mA ESM-880S11AMGS Io= 8000 mA Io= 11500 mA ESM-880S20AMGS Io= 16300 mA Io= 20000 mA Min. 93.0% 93.0% 92.0% 92.5% 93.0% 92.5% 92.0% 92.0% 93.0% 92.5% 94.0% 94.0% 93.0% 93.5% 94.0% 93.5% 93.0% 93.0% 93.5% 93.0% Typ. 95.0% 95.0% 94.0% 94.5% 95.0% 94.5% 94.0% 94.0% 95.0% 94.5% 96.0% 96.0% 95.0% 95.5% 96.0% 95.5% 95.0% 95.0% 95.5% 95.0% Max. Notes - - - Measured at 100% load and steady-state temperature in 25C ambient; - (Efficiency will be about 2.0% lower if - measured immediately after startup.) - - - - - Measured at 100% load and steady-state temperature in 25C ambient; - (Efficiency will be about 2.0% lower if - measured immediately after startup.) - - Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 4 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming General Specifications (Continued) Parameter Efficiency at 480 Vac input: ESM-880S280MGS Io= 1950 mA Io= 2800 mA ESM-880S420MGS Io= 3000 mA Io= 4200 mA ESM-880S700MGS Io= 4900 mA Io= 7000 mA ESM-880S11AMGS Io= 8000 mA Io= 11500 mA ESM-880S20AMGS Io= 16300 mA Io= 20000 mA Standby Power Min. 94.0% 94.0% 93.0% 93.5% 94.0% 94.0% 93.0% 93.0% 93.5% 93.0% - Typ. 96.0% 96.0% 95.0% 95.5% 96.0% 96.0% 95.0% 95.0% 95.5% 95.0% 1.5 W Max. - - - - - MTBF - 217,000 Hours - Lifetime Operating Case Temperature for Safety Tc_s Operating Case Temperature for Warranty Tc_w Storage Temperature Dimensions Inches (L × W × H) Millimeters (L × W × H) Net Weight - -40°C -40°C -40°C 100,000 Hours 50,000 Hours - - - - +90°C +80°C +85°C 10.83 × 6.30 × 1.91 275 × 160 x 48.5 - 3650 g - Notes Measured at 100% load and steady-state temperature in 25C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Measured at 480Vac/50Hz; Dimming off Measured at 480Vac input, 80%Load and 25C ambient temperature (MIL-HDBK217F) Measured at 480Vac input, 80%Load and 70C case temperature; See lifetime vs. Tc curve for the details Measured at 277Vac input, 100%Load and 40C ambient temperature Case temperature for 5 years warranty Humidity: 10%RH to 95%RH Humidity: 5%RH to 95%RH With mounting ear 11.81 × 6.30 × 1.91 300 ×160 x 48.5 Dimming Specifications Parameter Absolute Maximum Voltage on the Vdim (+) Pin Source Current on Vdim (+)Pin Dimming Output Range with 10%-100% (Default) ESM-880S280MGS ESM-880S420MGS ESM-880S700MGS ESM-880S11AMGS ESM-880S20AMGS ESM-880S280MGS ESM-880S420MGS ESM-880S700MGS ESM-880S11AMGS ESM-880S20AMGS Min. -20 V 200 uA 10%Ioset 195 mA 300 mA 490 mA 800 mA 1630 mA Typ. - 300 uA - - Max. 20 V 450 uA Ioset Ioset Notes Vdim(+) = 0 V 1950 mA Ioset 2800 mA 3000 mA Ioset 4200 mA 4900 mA Ioset 7000 mA 8000 mA Ioset 11500 mA 16300 mA Ioset 20000 mA 195 mA Ioset 1950 mA 300 mA Ioset 3000 mA 490 mA Ioset 4900 mA 800 mA Ioset 8000 mA 1630 mA Ioset 16300 mA Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 5 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming Dimming Specifications (Continued) Parameter Dimming Output Range with 5%-100% (Settable) ESM-880S280MGS ESM-880S420MGS ESM-880S700MGS ESM-880S11AMGS ESM-880S20AMGS ESM-880S280MGS ESM-880S420MGS ESM-880S700MGS ESM-880S11AMGS ESM-880S20AMGS Recommended Dimming Input Range Dim off Voltage Dim on Voltage Hysteresis PWM_in High Level PWM_in Low Level PWM_in Frequency Range PWM_in Duty Cycle PWM Dimming off (Positive Logic) PWM Dimming on (Positive Logic) PWM Dimming off ( Negative Logic) PWM Dimming on ( Negative Logic) Hysteresis Min. 5%Ioset 98 mA 150 mA 245 mA 400 mA 815 mA 0 V 0.35 V 0.55 V 3 V -0.3 V 200 Hz 1% 3% 5% 92% 90% - Typ. - - 0.5 V 0.7 V 0.2 V 5% 7% 95% 93% 2% Max. Ioset Ioset 10 V 0.65 V 0.85 V 10 V 0.6 V 3 KHz 99% 8% 10% 97% 95% - Notes 1950 mA Ioset 2800 mA 3000 mA Ioset 4200 mA 4900 mA Ioset 7000 mA 8000 mA Ioset 11500 mA 16300 mA Ioset 20000 mA 195 mA Ioset 1950 mA 300 mA Ioset 3000 mA 490 mA Ioset 4900 mA 800 mA Ioset 8000 mA 1630 mA Ioset 16300 mA Default 0-10V dimming mode. Dimming mode set to PWM in Inventronics Programing Software. Safety &EMC Compliance Safety Category Standard UL/CUL ENEC & CE UL 8750,CAN/CSA-C22.2 No. 250.13 EN 61347-1, EN 61347-2-13 UKCA BS EN 61347-1, BS EN 61347-2-13 CB IEC 61347-1, IEC 61347-2-13 Performance Standard ENEC EN 62384 EMI Standards Notes BS EN/EN IEC 55015(1) BS EN/EN IEC 61000-3-2 Conducted emission Test &Radiated emission Test Harmonic current emissions Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 6 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming Safety &EMC Compliance (Continued) EMI Standards Notes BS EN/EN 61000-3-3 FCC Part 15(1) EMS Standards Voltage fluctuations & flicker ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including interference that may cause undesired Operation. Notes BS EN/EN 61000-4-2 BS EN/EN 61000-4-3 BS EN/EN 61000-4-4 BS EN/EN 61000-4-5 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge Radio-Frequency Electromagnetic Field Susceptibility Test-RS Electrical Fast Transient / Burst-EFT Surge Immunity Test: AC Power Line: Differential Mode 6 kV, Common Mode 10 kV BS EN/EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS BS EN/EN 61000-4-8 BS EN/EN 61000-4-11 BS EN/EN 61547 Power Frequency Magnetic Field Test Voltage Dips Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Lifetime(kHours) Lifetime vs. Case Temperature Lifetime vs. Case Temperature 135 120 105 90 75 60 45 30 15 0 30 35 40 45 50 55 60 65 70 75 80 85 90 Case Temperature () Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 7 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B Inrush Current Waveform I Ipeak 50% Ipeak twidth 880W Programmable Driver with INV Digital Dimming Input AC Voltage Ipeak twidth (@ 50% Ipeak) 480V 20.0A 2.0ms Efficiency vs. Load ESM-880S280MGS(lo=1950mA) 100% Efficiency vs. Output Voltage 95% Efficiency 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage 100% ESM-880S420MGS(lo=3000mA) Efficiency vs. Output Voltage 95% Efficiency 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage Efficiency Efficiency t 100% ESM-880S280MGS(lo=2800mA) Efficiency vs. Output Voltage 95% 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage 100% ESM-880S420MGS(lo=4200mA) Efficiency vs. Output Voltage 95% 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 8 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 100% ESM-880S700MGS(lo=4900mA) Efficiency vs. Output Voltage 95% Efficiency 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage 100% ESM-880S11AMGS(lo=8000mA) Efficiency vs. Output Voltage 95% Efficiency 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage 100% ESM-880S20AMGS(lo=16300mA) Efficiency vs. Output Voltage 95% Efficiency 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage Efficiency Efficiency Efficiency 880W Programmable Driver with INV Digital Dimming 100% ESM-880S700MGS(lo=7000mA) Efficiency vs. Output Voltage 95% 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage 100% ESM-880S11AMGS(lo=11500mA) Efficiency vs. Output Voltage 95% 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage 100% ESM-880S20AMGS(lo=20000mA) Efficiency vs. Output Voltage 95% 90% 85% 80% 75% 60% 277Vac 400Vac 480Vac 70% 80% 90% 100% Normalized Output Voltage Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 9 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Power Factor PF Rev.B 880W Programmable Driver with INV Digital Dimming 1.00 0.95 0.90 0.85 0.80 0.75 60% PF vs. Load 70% 80% Load 277Vac 400Vac 480Vac 90% 100% Total Harmonic Distortion 20% 15% THD vs. Load 277Vac 400Vac 480Vac 10% THD 5% 0% 60% 70% 80% 90% 100% Load Protection Functions Parameter Min. Typ. Max. Notes Over Temperature Protection Short Circuit Protection Over Voltage Protection Input Under Voltage Protection (IUVP) Input Over Voltage Protection (IOVP) Input Protection Voltage Input Recovery Voltage Input Over Voltage Protection Input Over Voltage Recovery Max. of Input Over Voltage Decreases output current, returning to normal after over temperature is removed. Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Limits output voltage at no load and in case the normal voltage limit fails. 220 Vac 230 Vac 230 Vac 240 Vac 240 Vac 250 Vac Turn off the output when the input voltage falls below protection voltage. Auto Recovery. The driver will restart when the input voltage exceeds recovery voltage. 550 Vac 570 Vac 590 Vac Turn off the output when the input voltage exceeds protection voltage. 530 Vac - 550 Vac - 570 Vac 590 Vac Auto Recovery. The driver will restart when the input voltage falls below recovery voltage. The driver can survive for 8 hours with input voltage stress of 590Vac. Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 10 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B Input Under Voltage Protection Diagram Io 880W Programmable Driver with INV Digital Dimming Recovery Protection 230 Vac Input Over Voltage Protection Diagram Io Recovery Vin 240 Vac Protection 550 Vac Vin 570 Vac Dimming 0-10V Dimming The recommended implementation of the dimming control is provided below. Io/Ioset vs. Dimming Voltage Inventronics LED Driver V+ VVaux Dim+ Dim- Dimmer Io/Ioset 100% 80% 60% 40% 20% 0% 0 1 2 3 4 5 6 7 8 9 10 Dimming Voltage (V) Implementation 1: Positive logic Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 11 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming Inventronics LED Driver Io/Ioset vs. Dimming Voltage V+ VVaux Dim+ 100% 80% 60% 40% Io/Ioset Dimmer 20% Dim- 0% 0 1 2 3 4 5 6 7 8 9 10 Dimming Voltage (V) Implementation 2: Negative logic Notes: 1. Do NOT connect Dim- to the output V- or V+, otherwise the driver will not work properly. 2. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like zener. 3. When 0-10V negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby. PWM Dimming The recommended implementation of the dimming control is provided below. lo/loset vs. PWM duty cycle Inventronics LED Driver V+ VVaux Dim+ Dim- 100% 80% lo/loset 60% PWM Signal 40% 20% 0% 0% 20% 40% 60% 80% PWM duty cycle Implementation 3: Positive logic 100% Inventronics LED Driver lo/loset vs. PWM duty cycle V+ VVaux Dim+ Dim- 100% 80% lo/loset 60% PWM Signal 40% 20% 0% 0% 20% 40% 60% 80% PWM duty cycle Implementation 4: Negative logic 100% Notes: 1. Do NOT connect Dim- to the output V- or V+, otherwise the driver will not work properly. 2. When PWM negative logic dimming mode and Dim+ is open, the driver will dim to off and be standby. Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 12 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming Adjustable Dimming Curve 0-10V dimming curve can be set as corresponding dimming voltage by Inventronics Multi Programmer. Take the positive logic dimming as an example, the recommended implementation of the dimming control is provided below. Io/Ioset vs. Dimming Voltage Inventronics LED Driver 100% V+ Y 80% VVaux 60% Dim+ 40% Io/Ioset Dimmer 20% X Dim- 0% 012345678 Dimming Voltage(V) Implementation 5: Positive logic 9 10 Notes: 1. Do NOT connect Dim- to the output V- or V+, otherwise the driver will not work properly. 2. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like zener. 3. When dimming voltage X point is set to be smaller than Y point, the dimming curve is positive logic; conversely, when X point is set to be bigger than Y point, the dimming curve is negative logic. 4. For best dimming accuracy, the difference between X point and Y point is advised more than 4V. 5. Dimming off voltage adjustable. Time Dimming Time dimming control includes 3 kinds of modes, they are Self Adapting-Midnight, Self AdaptingPercentage and Traditional Timer. Self Adapting-Midnight: Automatically adjusts the dimming curve based on the on-time of past two days (if difference <15 minutes), assuming that the center point of the dimming curve is midnight local time. Self Adapting-Percentage: Automatically adjusts the on-time of each step by a constant percentage = (actual on-time for the past 2 days if difference <15 min) / (programmed on-time from the dimming curve). Traditional Timer: Follows the programmed timing curve after power on with no changes. Output Lumen Compensation Output Lumen Compensation (OLC) may be used to maintain constant light output over the life of the LEDs by driving them at a reduced current when new, then gradually increasing the drive current over time to counteract LED lumen degradation. Minimum Dimming Level with 5% or 10% Selectable The minimum dimming level can be set as 5% or 10% by Inventronics Multi Programmer,10% is default. Hold Time Adjustable When AC power is first applied to the LED driver, enabling a "Hold" period can allow devices powered by the Auxiliary voltage to stabilize before the driver fades up to the maximum dimming level. During this period, the driver will not respond to external dimming commands but will respond again after the hold time ends. Both the initial dimming percentage and the duration of this hold period can be adjusted by the Inventronics Multi Programmer. This function is disabled by default. Fade Time Adjustable There is a "Fade" period after the "Hold" period. The soft-start time and dimming slope applied to all dimming transitions can be adjusted individually. It is adjusted by the Inventronics Multi Programmer. This function is disabled by default. Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 13 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming End Of Life End-of-Life (EOL) is providing a visual notification to a user that the LED module has reached the end of manufacturer-specified life and that the replacement is recommended. Once active, an indication is given at each power-up of the driver, which the driver indicates this through a lower light output during the first 1 minute before normal operation is continued. Digital Dimming Inventronics Digital Dimming is a UART (Universal Asynchronous Receive Transmitter) based communication protocol. Please refer to Inventronics Digital Dimming file for details Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRG-MUL2 (Programmer) datasheet for details. Mechanical Outline L2/N L1/L Waterproof Cap Dim+ DimVaux/12V Tc V+ V- PROJ: Unspecified tolerance:±1 Note: This driver features UL Wet Location, IP67 panel mount connectors to streamline wiring in the field while still supporting stringent environmental conditions. The mating push-lock are not supplied by Inventronics. Please contact Wieland and Amphenol LTW or one of their suppliers for assistance sourcing the mating push-lock. Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 14 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B 880W Programmable Driver with INV Digital Dimming Location Vin Vo Dim Dim Series Wieland RST20i3 Rating voltage/current 600V/10A PN of connector on driver 96.032.1055.7 ALTW X-Lok,C-Size 600V/10A 300V/20A CC-03PMFS-QC801P CC-03PMFS-QC800P ALTW X-Lok,A-Size ALTW X-Lok,A-Size Waterproof Cap 300V/5A / AD-03PMMS-QC8001 CAP-WAAMQPC1 PN of mating push-lock 96.031.0055.7 (Spring) or 96.031.4055.7 (Screw) CC-03BFMB-QL8APA CC-03BFMB-QL8APP AD-03BFFB-QL8AP0 / RoHS Compliance Our products comply with reference to RoHS Directive (EU) 2015/863 amending 2011/65/EU, calling for the elimination of lead and other hazardous substances from electronic products. Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 15 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com ESM-880SxxxMGS Rev.B Revision History Change Date Rev. Item 2022-06-13 A Datasheet Release Format Product Photograph Features 2024-01-09 B Models Inrush Current Waveform Dimming Mechanical Outline 880W Programmable Driver with INV Digital Dimming Description of Change From / / / / / / / / To / Updated Updated Updated Updated Updated Updated Updated Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 16 / 16 All specifications are typical at 25C unless otherwise stated. Fax: 86-571-86601139 sales@inventronics-co.com