ProBreeze 6" Clip Fan

Safety Warnings

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• This appliance is not a toy. Children and pets should be supervised when the appliance is in use.
• To protect against electrical shock, do not immerse the unit, plug, or cord in water or spray with liquids.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• Only use the appliance on a dry, flat, stable surface.
• Do not use outdoors. This appliance is for indoor use only.
• Do not use cleaning agents or lubricants when cleaning. Use only a dry cloth. Unplug prior to cleaning.
• Do not place the appliance near a heating source.
• Do not cover or restrict airflow to the fan.
• Do not operate around flammable substances such as petrol or paint.
• Do not operate the fan near curtains or any other fabrics that could be sucked into the fan head.
• Avoid placing power cable in areas where it can become a tripping hazard.
• Avoid using extension cables or solid-state speed control devices as they may overheat and cause a fire risk.
• Do not insert fingers or any other objects into the fan.
• Do not use the fan in a window.
• Use only on the voltage specified on the rating label.
• When the appliance is not in use and before cleaning, unplug the appliance from the outlet.
• Turn off all controls prior to unplugging.
• Do not unplug by pulling on the cable.
• Unplug the fan and store in a dry, safe place when not in use.
• Use only as described in this manual.
• Note: The included clip is designed to attach to flat objects between 1cm and 4.5cm in depth. The fan is not designed for use on larger surfaces or cylindrical and tubular objects.

Features

The ProBreeze 6" Clip Fan features the following components:

• 1. Fan head: Houses the blades and motor.
• 2. Carry handle: For easy portability.
• 3. Motor housing: Protects the internal motor components.
• 4. Speed control switch: Typically a dial, used to turn the fan on/off and control speed (0=Off, 1=Low, 2=High).
• 5. Securing nut: Used in conjunction with the tilt adjustment screw.
• 6. Tilt adjustment screw: Allows for vertical angle adjustments of the fan head.
• 7. Pillar: Connects the fan head assembly to the clip mechanism.
• 8. 360° Rotary joint: Enables horizontal rotation of the fan head.
• 9. Clip: The mechanism used to attach the fan to surfaces.
• 10. Rubber grips: Located on the clip for secure attachment and to prevent surface damage.

Specifications

• Size: 220 x 200 x 320 mm
• Rated Power: 15W
• Rated Voltage And Frequency: 220-240V~ 50Hz
• Net Weight: 0.75kg

Assembly Instructions

1. Insert the fan head into the pillar attached to the clip.
2. Secure with the tilt adjustment screw and securing nut.

Operation

Attaching The Fan:

• Select a dry, flat, and safe location to clip the fan.
• When clipping the fan to a table or shelf, always ensure that the power cable does not hang where it can be accidentally pulled, causing the fan to fall.
• Do not hang or mount the fan on a wall or ceiling.

On/Off And Speed Control:

Use the dial at the rear of the fan to turn the fan on and off and to control the speed:

• 0 = Off
• 1 = Low speed
• 2 = High speed

Angle Adjustment:

Note: Ensure the fan is clipped safely to a dry, flat surface and turned off prior to making any angle adjustments.

Vertical Angle Adjustment

1. To change the tilting angle of the fan head, loosen the tilt adjustment screw by turning it anti-clockwise.
2. Move the fan head to the desired angle, then firmly tighten the tilt adjustment screw by turning it clockwise to lock the fan head in position.

Horizontal Angle Adjustment

• The fan head can be rotated through 360 degrees on its central pillar.
• Grasp the fan head and turn to the desired direction.

Cleaning

• Unplug from the electricity supply before cleaning.
• Clean only with a duster or soft dry cloth.
• Do not use harsh abrasive cleaning products.

Maintenance

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is required.

• To ensure adequate air circulation, keep the air vents at the rear of the main body free from dust or fluff. Use a vacuum cleaner to remove these when necessary. Do not probe any opening to remove dust or fluff.
• Do not allow water or any other liquid into the motor housing or interior parts.

Disposal

This marking indicates that this product should not be disposed of with other household waste throughout the EU. This is to prevent possible harm to the environment and human well-being. Contact your local authority for information regarding the collection systems available. If possible, recycle it responsibly to promote the sustainable reuse of resources. [WEEE Symbol: Crossed-out wheeled bin]