Important Safety Information
Please read carefully and save for future reference.
WARNING:
- Never leave the child unattended.
- Discontinue use when the child can sit up independently.
- Do not use this product on elevated surfaces (e.g., on a table).
- Always use the safety belts.
- Never use the toy bar to carry the product.
- Do not move or lift the product if a child is on it.
- When the product is connected to the music player, check that the music player's volume is set to a low level.
- Never allow the child to sleep in the product. This product cannot replace a crib. If your baby needs to sleep, place them in a suitable crib or bed.
- Do not use the product if any component is damaged or missing.
- Do not use accessories or spare parts other than those recommended by the manufacturer.
Battery Safety
- Non-rechargeable batteries are not to be recharged.
- Do not use different types of batteries or mix new and used batteries.
- Batteries must be inserted with correct polarity.
- Exhausted batteries should be removed from the product.
- Do not short-circuit battery terminals.
WARNING: This product contains a button battery. Swallowing a button battery can cause severe internal chemical burns.
WARNING: Remove exhausted batteries immediately. Keep new and used batteries out of reach of children. If you suspect batteries have been swallowed or inserted into any part of the body, seek immediate medical attention.
Technical Specifications
- Battery Power: 4 x AAA 1.5V batteries (not included).
- USB-DC Cable Power: Requires a USB-A port with output parameters: 5.8 - 6.0V, minimum 1A. Estimated rocker operating time on batteries: up to 5 hours (depending on battery type).
- Remote Control Power: 1 x CR2025 3V battery (not included).
Product Components
| Item No. | Description |
|---|---|
| 1 | Seat |
| 2 | Rocker base with control panel |
| 3 | Legs |
| 4 | Canopy with toys and mosquito net |
| 5 | USB-DC cable |
| 6 | Screws x4 |
| 7 | Remote control |
Assembly and Disassembly
Follow diagrams A through N.
Assemble on a soft surface to avoid damaging the product's surface. Carefully check all rocker components (1-7) after unpacking to ensure none are damaged. Unfold the seat. Connect the frame elements together using the pins on both sides (Diagram A). A clicking sound from the pins indicates correct assembly. Then, slide the cover material onto the seat frame and secure with Velcro straps (Diagram B). The correctly assembled frame with padding is shown in the drawing (Diagram C).
Insert the rocker legs (3) into the base with the control panel (2) and screw in four screws (6) using a Phillips screwdriver (not included) (Diagram D). Place the assembled base on the floor. Hold the seat with both hands and gently insert the seat pin into the opening on the base (Diagram E). When the elements connect, you will hear a characteristic click sound. Caution: Align the parts so the seat can connect to the base without any obstacles or force.
Attach the canopy material (4) to the seat back and secure it with two clips (Diagram E). To use the mosquito net, simply remove it from the canopy, slide it onto the seat, and attach it to its edges.
To disassemble the product, press the metal button located on the rear of the rocker base (Diagram G), and with a specific movement, detach the seat from the rocker legs. To disassemble the rocker frame, pull the cover material off the rocker frame (Diagram H), then press the pins and detach the frame elements with a firm motion (Diagram I). Pull out the padding material from the frame.
The rocker has a rocking function. If you want the seat to swing sideways, move the lock button upwards (Diagram L). Caution: Do not activate rocking if the button is in the locked position. The rocker has two harness mounting heights. Choose one depending on the child's size.
Cushion Adjustment
Adjustment is done using the Velcro strap (Diagram M). By moving the buckle downwards, you can adjust the cushion lower, and by pulling the buckle upwards, you can adjust it higher. The Velcro strap and cushion are used to stabilize the cushion's position.
Battery Installation/Replacement
In the Rocker:
To install or replace batteries, use a Phillips screwdriver (not included) to unscrew the protective cover on component 2 (one screw) and replace the batteries, paying attention to polarity. Follow Diagram K.
In the Remote Control:
To install or replace the battery, follow the diagram on the back of the remote control. Press and hold the button, then slide out the battery compartment. Dispose of the used battery and insert a new one, paying attention to polarity (positive terminal up). Slide the compartment back in.
Product Operation
You can control the rocker using the remote control (7) and the touch panel on the rocker base (Diagram J). After turning on the device, the LED above the power icon lights up.
Bluetooth Connectivity:
Additionally, you can connect the rocker to your phone via Bluetooth to play your child's favorite music. To connect, activate the Bluetooth function on your phone and select the "swing chair" option (Diagram N). When the connection is active, you will hear a characteristic sound coming from the rocker.
Audio Files:
It is possible to play audio files via the USB port. Insert the media with audio files into the USB port. The rocker supports MP3, WAV, and WMA formats.
Control Panel Functions (Diagram J)
- On/Off: ⚡ Turns the device on or off.
- Swing Speed: ⚙️ Adjusts the rocking speed from 1 to 5.
- Music Control: ⏸️ Play or pause music.
- Track/Volume: Single click to change tracks; press and hold to adjust volume (4 levels). ?/?
- Swing Timer: ⏱️ Set swing duration to 8, 15, or 30 minutes.
Remote Control Functions (Diagram 7)
- On/Off: ⚡
- Music: ? Turns music on or off.
- Timer: ⏱️ Sets the swing duration.
- Play/Pause: ▶️ / ⏸️ Plays or pauses music.
- Volume Up: ? Increases volume.
- Previous Track: ⏪ Selects the previous music track.
- Volume Down: ? Decreases volume.
- Sleep Mode: ? Activates a 15-minute swing mode with intensity levels 2 and 1.
- Stop: ⏹️ Stops all functions.
- Swing Speed Levels: 1️⃣, 2️⃣, 3️⃣, 4️⃣, 5️⃣ Adjusts swing speed from 1 (lowest) to 5 (highest).
Maintenance and Cleaning
Seat Pad, Cushion:
- Wash at 40°C, normal program.
- Do not tumble dry.
- Dry naturally on a line or hanger.
- Do not bleach.
- Do not iron.
- Do not dry clean.
Toy Bar:
Clean with a clean, damp cloth and mild soap. Air dry. Do not immerse in water.
Rocker Base:
Clean with a soft, clean, and dry cloth.
Storage
Keep the product out of reach of children. Remove batteries if the product will not be used for an extended period to prevent corrosion or leakage.
Disposal of Used Equipment and Batteries
The symbol of a crossed-out wheeled bin ?️ indicates that the product should not be disposed of with household waste. Users are responsible for returning used equipment and batteries to designated collection points for proper treatment. Information on available collection systems for used electrical equipment and batteries can be found at retail points and municipal offices.
Every household is a user of electrical and electronic equipment and batteries, and therefore a potential producer of hazardous waste due to the presence of dangerous substances, mixtures, and components. Proper handling of used equipment and batteries prevents negative consequences for the environment and human health.
Warranty
Full warranty terms are available on the website WWW.KINDERKRAFT.COM.
Contact and Manufacturer Information
For the well-being of our clients, Kinderkraft is at your disposal! If you encounter any problems with the product you received, please contact us in the most convenient way for you.
International Contact:
support@kinderkraft.com
+44 20 4525 0748
Manufacturer:
4Kraft Sp. z o.o.
ul. Tatrzańska 1/5
60-413 Poznań, Poland
Easy with kids
