CLASSIC cantabile Piano Bench Assembly Guide

Assembly Diagrams and Components

The following diagrams illustrate the assembly process and identify the components:

Diagram 1: Shows two wooden frame pieces (labeled [a] and [b]) being joined. Arrows indicate the direction of assembly, suggesting insertion of one piece into the other.

Diagram 2: Depicts a circular seat base (labeled [c]) with four pre-drilled holes. This base is shown being aligned with the assembled wooden frame. Screws (labeled [d]) and washers (labeled [e]) are shown, with a quantity indicator of "4x" for both.

Diagram 3: Illustrates the assembled frame with the seat base attached. A screw (labeled [f]) and a base ring (labeled [g]) are shown, with a quantity indicator of "4x" for the screws.

Component Identification (Bottom Row):

• [b]: Wooden frame/leg components.
• [c]: Circular seat base.
• [d]: Screws (4x).
• [e]: Washers (4x).
• [f]: Screw/Bolt.
• [g]: Base ring.

[!] The assembly process requires careful attention to prevent damage or injury.

Precautions and Safety Warnings

PRECAUTIONS (PLEASE READ CAREFULLY)

Children should be supervised to ensure that they do not use this product as a toy. Never let children play with the packaging material unsupervised.

Warning: Always place the product on a suitable surface to prevent it from wobbling or falling over.

Precautions: To avoid damage to the product, do not place it in places with high temperatures or a lot of dust, do not place it directly next to an air conditioner and avoid direct sunlight. Do not use force when handling the product and do not place objects that are too heavy on it.

Location and Environmental Considerations

Do not expose the product to the following conditions to avoid warping, discoloration, or major damage:

• Direct sunlight
• Extreme temperature or humidity
• Excessively dusty or dirty location
• Strong vibration or shock

Cleaning and Handling

Cleaning: Only clean the product with a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemically impregnated wipes.

Handling: Do not exert excessive force on controls such as switches, buttons.

General Information and Manufacturer Details

Technical changes and changes in appearance are reserved. All information corresponds to the status at the time of printing. Musikhaus Kirstein GmbH assumes no liability for the correctness and completeness of the descriptions, illustrations, and information contained. Shown colors and specifications may differ slightly from the product.

Musikhaus Kirstein GmbH - Products are only available through authorized dealers. Distributors and dealers are not authorized representatives of Musikhaus Kirstein GmbH and have no authority to bind Musikhaus Kirstein GmbH legally in any way, be it expressly or through coherent action.

This manual is protected by copyright. Any duplication or reprint, even in part, and any reproduction of the images, even in a modified state, is only permitted with the written consent of Musikhaus Kirstein GmbH.

Musikhaus Kirstein GmbH
Bernbeurener-Str. 11, D-86956 Schongau
Tel: 0049-8861-909494-0
Mail: info@kirstein.de
Website: www.kirstein.de