Electus Distribution - Home
Instruction Manual for Jaycar models including: SZ1940 8 Way Switch Panel, SZ1940, 8 Way Switch Panel, Switch Panel, Panel
8 Way Switch Panel with Voltage Protection 60A KIT | Jaycar New Zealand
8 Way 60a Switch Panel Kit - Mr Positive NZ
File Info : application/pdf, 8 Pages, 747.96KB
DocumentDocumentSZ1940 8 Way Switch Panel with Voltage Protection 60A Kit Instruction Manual WHAT'S INCLUDED 80 PRODUCT FEATURES Manage up to eight auxiliary LED lights or electrical devices. 7-color LED ambient lighting Lighting control: Press and hold for 3 seconds to change the colour of the background light. Automatic brightness adjustment of the backlight ON/OFF switch for single-button operation There are 80 customisable labels included. | 600W - 1200W SWITCH PANEL INDICATION BACKLIT BRIGHTNESS DIMMABLE The brightness of the lighting on the switch panel will automatically adjust in reaction coming from external light. The light on the switch panel will dim to lessen the impact on the driver's vision in the tunnel or other dark areas. The light of the control panel will adjust and illuminate brighter depending on the ambient light during the daytime. 80 PCS REUSABLE SWITCH LABELS CONTROL BOX INSTALLATION MOUNTING THE CONTROL BOX There are two different installation methods available, fixed mount using the bracket provided or installing it flush in a suitable area. The ideal mounting of the control box should be in areas where the harness is not exposed, preventing it from damage. If you decide to make provision for the control panel, please check the clearance to prevent any damage to the car's wiring harness and other components of the vehicle. Using the mounting bracket as a guide, find a suitable location to mount the control box. Using the control box as a guide, find a suitable location to mount the control box. SWITCH PANEL INSTALLATION SWITCH PANEL MOUNTING There are two different installation methods using the adjustable brackets provided. Make sure the control wire and extension lead are long enough to reach the desired location. Check there is enough clearance in the desired location. SWITCH ASSEMBLY WIRING DIAGRAM The total W The maximum output current for 1 to 6 is 20A and for 7 to 8 is 30A. Ensure all the wiring connections are completed before connecting the power cables to the battery. Distributed by: Electus Distribution Pty Ltd 46 Eastern Creek Dr, Eastern Creek NSW 2766 Australia Ph 1300 738 555 Int'l +61 2 8832 3200 Fax 1300 738 500 www.electusdistribution.com.au