Xiaomi Redmi Note 14 Pro + 5G

Introduction

Thank you for choosing the Redmi Note 14 Pro + 5G.

Device Overview

The device features a display screen. On the right side, there are 'Volume Buttons' and a 'Power Button'. At the bottom, there is a 'USB Type-C Port'. The SIM tray area shows slots for 'Nano-SIM' and 'Micro SD'.

Getting Started

Turning On and Setup

To turn on the device, press and hold the power button until the phone vibrates. Follow the on-screen instructions to select your language and region, and complete the setup.

Transferring Data from Your Previous Phone

You can transfer data from your previous device using your Google account. Refer to your old phone's user manual for backup instructions. Navigate to Settings > Accounts > Google, select the data you wish to restore, and synchronization will begin automatically when your phone is connected to the internet.

Restoring App Settings from Your Previous Android Phone

If your previous device was Android and Google account backup was enabled on this device, you can restore app settings, including Wi-Fi passwords. Go to Settings > Backup & reset and enable 'Automatic restore'.

Important Information

Waste Declaration

Dispose of this product correctly. This symbol indicates that the product should not be disposed of with other household waste across the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. For safe recycling, please use return and collection systems or contact the retailer where the item was purchased. For the Environmental Statement, please visit: http://www.mi.com/en/about/environment/

CAUTION!

⚠️ Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to instructions. Do not listen at high volume levels for extended periods to prevent hearing damage. For more important safety information, please refer to the User Manual at: http://www.mi.com/en/certification/

Important Safety Information

Read all safety information before using the device:

• Using unauthorized cables, power adapters, or batteries may cause fire, explosion, or other hazards.
• Use only approved accessories compatible with your device.
• The operating temperature range for this device is 0°C to 40°C. Using the device outside this range may damage it.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damaging the battery or device.
• Charge the device only with the provided or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage to the device and adapter.
• Disconnect the adapter from the device and power outlet after charging is complete. Do not charge the device for more than 12 hours.
• Batteries must be recycled or disposed of separately from household waste. Improper battery use may cause fire or explosion. Dispose of the device, battery, and accessories according to local regulations or recycle them.
• Do not disassemble, puncture, crush, or incinerate the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short-circuit the battery, as this may cause overheating, burns, or other injuries.
• Do not place the battery in a high-temperature environment. Overheating may cause an explosion.
• Do not disassemble, puncture, or crush the battery, as it may leak, overheat, or explode.
• Do not burn the battery, as it may cause fire or explosion.
• If the battery appears deformed or damaged, stop using it immediately.
• The user should not remove or replace the battery. Battery removal or repair should only be performed by an authorized repair center.
• Keep the device dry.
• Do not attempt to repair the device yourself. If any part of the device is not functioning properly, contact Xiaomi customer support or take it to an authorized repair center.
• Connect other devices according to their user manuals. Do not connect incompatible devices to this device.
• The socket for AC/DC adapters should be installed near the equipment and be easily accessible.

Safety Warning

Comply with laws and regulations that restrict the use of mobile phones in specific situations and environments. Do not use your phone in explosive atmospheres (e.g., at gas stations, fuel depots, in the hold of ships, or near areas where chemicals or flammable materials are stored or transferred). Follow all signs and instructions for turning off wireless devices. Turn off your mobile phone or wireless device when in a blasting area or in areas posted with signs instructing to turn off two-way radios or electronic devices to prevent interference with blasting operations. Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Comply with hospital and healthcare facility rules and regulations. Consult your doctor and device manufacturer to determine if your phone's use may interfere with the operation of your medical device. To prevent possible interference with a pacemaker, maintain a minimum distance of 15 cm between your mobile phone and pacemaker. Use the phone on the opposite ear from the pacemaker and do not carry it in a breast pocket. To prevent interference with medical devices, do not use your phone near hearing aids, cochlear implants, etc. Comply with aircraft safety regulations and turn off your phone when boarding an aircraft as required. When driving, use your phone in accordance with applicable traffic laws and regulations. To prevent lightning strikes, do not use your phone outdoors during thunderstorms. Do not use your phone to make calls while it is charging. Do not use your phone in high-humidity environments such as bathrooms, as this may cause electric shock, injury, fire, or damage to the charger.

Emergency Calls

Important: Connectivity cannot be guaranteed under all conditions. For critical communication needs, such as medical emergencies, do not rely solely on your phone. If your device supports this feature, you can also add the following text: This phone has the capability to receive alert and alarm messages sent via cellular broadcast (Cell Broadcast) system on channel 112 for air raids, and for disaster and emergency situations (e.g., earthquakes, floods, avalanches, and landslides). To receive these alerts, you must enable 'Cell Broadcast' service and channel 112 within the 'Cell Broadcast' application.

Consumer's Selective Rights

In case of a defect in the goods, the consumer may exercise one of the following rights as stipulated in Article 11 of Law No. 6502 on Consumer Protection:

• a- Withdrawal from the contract,
• b- Requesting a discount from the sales price,
• c- Requesting free repair,
• ç- Requesting replacement with a defect-free equivalent of the sold item.

If the consumer chooses the right to free repair, the seller is obliged to repair or have the item repaired without charging any fee for labor, replacement parts, or any other cost. The consumer can also exercise this right against the manufacturer or importer. The seller, manufacturer, and importer are jointly and severally liable for the consumer exercising this right. If the item is re-defective within the warranty period, the maximum repair time is exceeded, or if a report from an authorized service station, seller, manufacturer, or importer determines that repair is not possible, the consumer may demand a refund, a price reduction proportional to the defect, or, if possible, replacement with a defect-free equivalent from the seller. The seller cannot refuse the consumer's request. If this request is not fulfilled, the seller, manufacturer, and importer are jointly and severally liable. In case of disputes arising from the exercise of warranty rights, the consumer may apply to the Consumer Arbitration Committee or the Consumer Court in their place of residence or where the transaction was made.

Recycling

♻️ Always leave your used electronic products, batteries, and packaging materials at designated collection points. This helps prevent uncontrolled waste disposal and promotes the recycling of materials. Electrical and electronic products contain valuable materials such as metals (copper, aluminum, steel, magnesium) and precious metals (gold, silver, palladium). All materials in the device can be recovered as materials and energy.

Device Maintenance and Usage Errors

Handle your device, battery, charger, and accessories with care. The following recommendations will help keep your device in working order:

• Keep the device dry. Raindrops, moisture, and liquids or vapor may contain minerals that can damage electronic circuits.
• Do not use or store the device in dusty or dirty locations.
• Do not store the device in environments with high temperatures. High temperatures can damage the device or battery.
• Do not store the device in cold environments. When the device returns to normal temperature, condensation may form inside, damaging the device.
• Do not open the device in any way not described in the user manual. Unauthorized modifications can damage the device and violate regulations for radio devices. Do not drop, strike, or shake the device or battery. Rough handling can damage the device.
• Use only a soft, clean, and dry cloth to clean the surface of this device.
• Do not paint the device. Paint may interfere with normal operation.
• Keep the device away from magnets or magnetic fields. To ensure the safety of your important data, back it up on at least two different locations such as your device, memory card, or computer, or write it down in a safe place.
• The device may heat up during prolonged operations. This is normal in most cases. To prevent overheating, the device may automatically slow down, close applications, stop charging, and shut down if necessary. If the device is not functioning as expected, take it to the nearest authorized service center.

Maintenance and Repair by Consumer

Your device does not require periodic maintenance. There is no maintenance or repair that the consumer can perform on the device. If you require maintenance or repair, please seek assistance from the points listed in the Authorized Service list.

Efficient Energy Usage

• Turn off data connections such as Bluetooth and wireless networks when not in use.
• Reduce screen brightness and set the screen to turn off after a shorter period.
• Turn off unnecessary sounds such as key tones.

Points to Note During Transport and Shipping

Before transporting your device, ensure all connections are terminated and cables are disconnected. When packing, use the original box and packaging materials. When using and later relocating the device, take care not to shake it, expose it to impact, heat, humidity, or dust.

EU Declaration of Conformity

Manufacturer: Xiaomi Communications Co., Ltd.

Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Radio Equipment:

Model: 24115RA8EG

Brand name: Redmi

Description: Mobile Phone

Radio-related Software Version: Xiaomi HyperOS 1.0

Hardware Version: 13510016U

Supplied Accessories and Components:

(In different markets, due to regulations or other factors, not all accessories and components listed in this document are always included)

We, Xiaomi Communications Co., Ltd., declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations: RE Directive (2014/53/EU), RoHS Directive (2011/65/EU) and its amendment (EU) 2015/863.

The following harmonized standards and/or other relevant standards have been applied:

1. Health and Safety (Article 3.1(a) of the RE Directive)

• EN 50360:2017
• EN 50566:2017
• EN 62209-1:2016
• EN 62209-2: 2010+A1: 2019
• EN IEC/IEEE 62209-1528:2021
• EN IEC 62311:2020
• EN 50665: 2017
• EN IEC 62368-1: 2020+A11:2020
• EN 50332-1:2013
• EN 50332-2:2013

2. Electromagnetic compatibility (Article 3.1 (b) of the RE Directive)

• ETSI EN 301 489-1 V2.2.3 (2019-11)
• ETSI EN 301 489-3 V2.3.2 (2023-01)
• Final draft ETSI EN 301 489-17 V3.3.0 (2024-07)
• ETSI EN 301 489-19 V2.2.1 (2022-09)
• Draft ETSI EN 301 489-52 V1.2.5 (2024-08)
• EN 55032: 2015+A1:2020
• EN 55035: 2017+A11:2020
• EN IEC 61000-3-2: 2019+A1: 2021
• EN 61000-3-3: 2013+A2: 2021

3. Radio frequency spectrum usage (Article 3.2 of the RE Directive)

• ETSI EN 301 511 V12.5.1 (2017-03)
• ETSI EN 301 908-1 V15.2.1(2023-01)
• ETSI EN 301 908-2 V13.1.1 (2020-06)
• ETSI EN 301 908-13 V13.2.1 (2022-02)
• Draft ETSI EN 301 908-25 V15.0.0 (2024-07)
• ETSI EN 301 893 V2.1.1 (2017-05)
• ETSI EN 303 687 V1.1.1 (2023-06)
• ETSI EN 300 440 V2.2.1 (2018-07)
• ETSI EN 300 328 V2.2.2 (2019-07)
• ETSI EN 300 330 V2.1.1 (2017-02)
• ETSI EN 303 413 V1.2.1 (2021-04)

4. RoHS Directive (2011/65/EU) and its amendment Directive (EU) 2015/863

• EN IEC 63000:2018

5. Specific (Article 3.3g of the RE Directive)

• European Commission Guidelines for compliance with delegated regulation (EU) 2019/320

6. Specific (Article 3.4 of the RE Directive)

• DIRECTIVE (EU) 2022/2380 of the European Parliament and of the Council for common charger
• C/2024/2997 the Guidance for the interpretation of the Common Charger Directive

Article 3.4: The conformity assessment procedure as referenced in Annex II of the RE Directive, module A.

Article 3.1 & 3.2 & 3.3g & 3.4: The notified body (Name: PHOENIX TESTLAB, ID: 0700) performed the conformity assessment according to Annex III of the RE Directive and issued the EU-type examination certificate (Ref. No.24-210789-24-220789).

Signed for and on behalf of: Xiaomi Communications Co., Ltd.

Place: Beijing

Date: October 12, 2024

Name: Zeng Qingyao

Function: Product Certification

Signature: Zeng Qingyao

EU contact address:

Xiaomi Technology Netherlands B.V

Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands