HALOUN 10000mAh Magnetic Wireless Power Bank

Introduction

Thank you for purchasing the HALOUN 10000mAh Magnetic Wireless Power Bank. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Purchase order number.

Package Contents:

• 10000mAh Power Bank*1
• USB A to C Cable*1
• User Manual*1
• USB C to C Cable*1
• Warranty Card*1
• Qualified Certificate*1

Product Diagram

The product diagram illustrates the HALOUN 10000mAh Magnetic Wireless Power Bank. Key components are labeled:

• 1. Power Button: Used to check battery status or activate wireless charging.
• 2. Battery Level Indicator Lights: Four lights indicating charge levels (25%, 50%, 75%, 100%).
• 3. USB C Input/Output Port: For charging the power bank and outputting power.
• 4. USB A Output Port: For outputting power to devices.
• 5. Magnetic Wireless Charging Pad: The surface for wireless charging, with magnetic alignment.
• 6. Phone Locating Magnet: Magnets to assist in aligning compatible phones with the charging pad.
• 7. Wireless Charging Indicator Light: A dedicated light for wireless charging status.
• 8. Stand Bracket: A feature to prop up a phone.

Image of the HALOUN 10000mAh Magnetic Wireless Power Bank.

Indicator Lights

Battery Level Indicator Light:

The power bank is equipped with 4 Battery Level Indicator Lights, representing 25%, 50%, 75%, and 100% power remaining. The first indicator light turns green when fast charging or recharging mode is active.

Wireless Charging Indicator Light:

The power bank has 1 Wireless Charging Indicator Light. Press the power button once to activate wireless charging; the light turns red. If the first battery level indicator light also turns green, it signifies readiness for fast wireless charging. When wireless charging is active, the indicator light turns blue.

Specifications

How to Use

Charging the Power Bank:

1. Fully charge your power bank before first use.
2. Connect a USB C charging cable to a USB charger or charging port.
3. Connect the other end to the USB C input port on the power bank.
4. Unplug the power bank when fully charged.

Charging Your Device:

1. Connect the charging cable to your device's charging port.
2. Connect the other end to the appropriate USB A/C output port on S1032.
3. Unplug your device when fully charged.
4. To check the remaining battery level, press the power button.

Product Care & Notice:

• Keep away from liquids, fire, and extreme heat. Do not use this product in high temperature and humid environments.
• When using this power bank, do not place metal objects (such as keys, coins, batteries, or jewelry) on it, as this may cause abnormal charging or scalding.
• Charge your Power bank at least once every 3 months.
• Avoid dropping.
• Do not disassemble by yourself, as this will invalidate the warranty.
• Dispose of batteries according to local environmental laws.

Charging Protocols and Compatibility

Recharging Power Bank:

• USB C Input is compatible with PD2.0/3.0, QC 2.0/3.0, Huawei FCP, Samsung AFC, and Spreadtrum SFCP fast charge protocols.
• When recharging the power bank, USB A Output and Wireless charging can also be used to charge your phones, but it is less efficient and not recommended.

Wireless Charging:

• This Power Bank supports all Qi standard protocol devices for wireless charging. The magnetic suction function is specifically designed for iPhone 12, 13 all series (iPhone 12/13 Mini, Pro, Pro Max series), allowing the power bank to attach automatically.
• After attaching the mobile phone to the power bank, press the power button to activate the wireless charging function.
• The magnetic suction function is also compatible with Apple's official MagSafe series mobile phone cases. Third-party phone cases require explicit support for MagSafe magnetic suction to ensure compatibility. Conventional protective cases may affect the charging experience.

Fast USB A/C Charging

• USB C Output supports PPS, PD2.0/3.0, QC4+/4/3.0/2.0, Huawei FCP, Samsung AFC, MTK-PE 2.0/1.1, and Spreadtrum SFCP quick charge protocols. It also supports BC1.2 protocol and high current charging for Samsung and iPhone.
• USB A Output is compatible with QC4+/4/3.0/2.0, Huawei FCP/SCP, Samsung AFC, MTK-PE 2.0/1.1, Spreadtrum SFCP quick charge protocols, and OPPO VOOC quick charge protocol. It also supports BC1.2 protocol and high current charging for Samsung and iPhone.
• A special data cable is required to activate OPPO VOOC and Huawei SCP quick charge protocols.
• When charging a single quick charge phone using either USB A or USB C Output, fast charging mode is supported. However, if both USB A and USB C Outputs are used concurrently to charge two quick charge phones, fast charging mode will exit automatically, and both phones will enter normal charging mode.
• When the power bank is charging two quick charge phones simultaneously, if the phone connected to the USB A Output is unplugged, the power bank will restart after 10 seconds, and the USB C quick charge output will re-enter quick charge mode. If the phone charging via USB C Output is unplugged, the power bank will restart after 1 second, and the USB A Output will re-enter quick charge mode.

Warranty & Customer Support

Warranty Card:

Through rigorous quality testing, all HALOUN products are guaranteed to satisfy. For more information, please consult our website: www.leuhank.com

Guarantee:

• Customers purchasing HALOUN products receive superior after-sale service.
• Products can be returned for replacement within 30 days if there are any quality issues without man-made damage or unauthorized maintenance, provided packaging is intact.
• Enjoy one year of free maintenance.
• Guarantee excludes:
• Man-made damage, operation in an informal working environment.
• Users unpacking, refitting, or repairing privately without authorized service.
• Damage due to force majeure.
• Absence of the guarantee card or effective purchase invoice.
• Exceeding the warranty period.

Customer Support:

For questions, support, or warranty claims, contact HALOUN at the address below with your Purchase order number, Sales platform, and product model number.

Email: support@leuhank.com

Please note, HALOUN can only provide after-sales service for products purchased directly from Brand Authorized stores. If purchased from a different seller, please contact them directly for service or warranty issues.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.