AIRTHEREAL FLAME DIFFUSER

SAFETY PRECAUTIONS

• When the room temperature is below 32°F / 0°C, please empty the water tank. If the water is allowed to turn to ice it can damage the components.
• Please use purified or distilled water so that your atomizer will not be damaged due to impurities in the water. If you use normal tap water you may notice a white buildup of calcium or lime in the diffuser.
• The maximum water volume is 16.9 oz/500 ml. Exceeding the max capacity line will affect the atomization effect or cause water leakage and damage to the machine.
• Do not let water splash into the base to avoid damaging the internal parts.
• After use you must pour out the remaining water in the water tank to prevent damage to the atomizer. Do not leave water sitting in the tank for several days without use.
• When cleaning or adding water to the device, always remove the AC adaptor from the outlet. Do not insert or remove the AC adaptor with wet hands. Doing so may cause electric shock or injury.
• Do not replace the power cord without authorization.
• In case of abnormality, do not attempt to disassemble or repair the device by yourself. Doing so could cause fire, electric shock, injury, or malfunction. Please stop operation and send an email to support for help.

⚠️ WARNING Cancer and Reproductive Harm www.p65warnings.ca.gov

PARTS

Diagram showing the components of the Airthereal LF500MS Flame Diffuser. The top part shows the 'Top cover'. Below it, a diagram of the main unit shows 'Light', 'Water tank', 'Base', and 'Control panel'. A separate illustration shows the 'Power adaptor'.

Note: The accessories in the package are exclusively used for the product. The appearance and quantity may be different for different batches. Please contact support if you have any questions.

SPECIFICATIONS

OPERATION

1. Remove the top cover.
2. Add water to the max fill line. Add 2-5 drops of scented essential oil directly to the tank if needed.

Note:

• The maximum water volume is 16.9 oz/500 ml. Exceeding the max capacity line will affect the atomization effect or cause water leakage and damage to the machine.
• Please use purified or distilled water so that your atomizer will not be damaged due to impurities in the water. If you use normal tap water you may notice a white buildup of calcium or lime in the diffuser. While not harmful, these deposits may cause a white powder to form when the mist dries or inside the machine. These deposits can be cleaned with distilled white vinegar.

Diagram illustrating water addition: shows 'Add water position' and 'Max water level' indicators.

OPERATION (Continued)

3. Place the top cover back onto the diffuser.
4. Insert the power adapter cord.
5. Press the power button ▶️ and you will hear a beep sound. The default settings are as follows: Atomization level: 2 (high), Brightness: high, Lighting effect: full bright.

WI-FI CONNECTION

Preparation before connecting:

• Make sure your Wi-Fi router supports 2.4GHz (NOT 5GHz) and 802.11b/g/n bands. Note: Most 5GHz routers can also be set to 2.4GHz band or dual band.
• Make sure the Wi-Fi name and password are correct.
• A smartphone or tablet supporting a 2.4GHz network.
• Download the App named AIRIA from the App Store (iOS devices) or Google Play (Android devices).

AIRIA App Download:

[QR code for AIRIA App on Google Play] [QR code for AIRIA App on App Store]

Step 1

Long press the ? on the control panel, and the ? on the screen will blink quickly.

Step 2

Connect your phone to the 2.4 GHz network your flame diffuser will use. Open AIRIA and tap the "+" icon in the top right corner. It will appear an added page, click "Go to add".

Screenshots show the AIRIA app interface for connecting the flame diffuser. This includes the app icon, the control panel display showing blinking Wi-Fi symbol, the 'Add Device' screen, and the Wi-Fi password entry screen.

WI-FI CONNECTION (Continued)

Step 3

Go to the next step. Enter the password of your Wi-Fi network when prompted (same Wi-Fi network on which your smartphone is connected) and then click confirm.

Important note: The flame diffuser must be connected to a 2.4 GHz Wi-Fi network. If your router (internet box) broadcasts 2 Wi-Fi bands (2.4GHz and 5GHz), consult your router user manual to learn how to select the 2.4 GHz Wi-Fi band.

Step 4

Your device is now connected successfully. You can find the diffuser in the device list.

Screenshots show the AIRIA app interface with device controls, including Flame Mode, Mist level, Light Mode, and Brightness settings.

CONTROL PANEL

Illustration of the control panel display showing icons for power, timer, light brightness, lighting effect, mist level, and low water. It also shows a digital display for settings.

Function selection

Notes:

• After powering on, there will be a beep sound.
• There will be a beep each time you press a button.
• When there is no water in the tank you will hear 2 beeps over 5 seconds and the diffuser will automatically power down. The low water icon will also illuminate.
• When the timer is up you will hear a long beep sound before the diffuser automatically shuts down.

MODE CONTROL WITH AIRIA APP

This section describes controlling the diffuser via the AIRIA app, showing options for Flame Mode, Mist level, Light Mode, Brightness, and Time & start delay.

Screenshots show the AIRIA app interface with device controls, including Flame Mode, Mist level, Light Mode, and Brightness settings.

CLEANING INSTRUCTIONS

1. Drain the water remaining in the water tank. Ensure the air outlet side is facing up during draining to avoid moisture getting inside the unit.
2. Do not use any benzene, paint thinner, alcohol, or other types of chemicals during cleaning. Doing so may cause damage to the machinery.
3. If using detergent, always use mild kitchen detergent. Chlorine, acid, and enzyme-type detergents remaining inside pose the danger of emitting noxious gasses. Distilled white vinegar is recommended for cleaning.
4. If you do not intend to use the product for an extended period of time, clean it and dry it thoroughly before storage.

Diagram illustrating water addition: shows 'Add water position' and 'Max water level' indicators.

TROUBLESHOOTING

If the above methods cannot be improved, please consult the customer service hotline for assistance.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

LIMITED WARRANTY

We provide a 1-year warranty. For more information please visit www.airthereal.com/warranty.

• What's covered? Defects due to faulty materials and/or workmanship of the product.
• What's not covered?
  1. Damage caused by the owner when attempting to fix or altering the product by himself or herself.
  2. Damage caused by misuse, abuse, neglect, alterations or unauthorized repair.
  3. Natural depreciation.
• Warranty Period Warranty becomes effective from the date of original purchase and will last for 1 year.
• Who's covered? This limited warranty is only effective for the original purchaser, it is non-transferable.
• How to request warranty services? To obtain the benefit of this warranty, please email support@airthereal.com. Our customer service will address your issue as soon as possible!

ATTRIBUTIONS

Apple App Store is a trademark of Apple Inc. Google, Android, and Google Play are trademarks of Google LLC. Wi-Fi® is a registered trademark of Wi-Fi Alliance®. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. iOS is a registered trademark of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Arovast Corporation is under license.