NYHAMN Sofa-Bed Cover Assembly Instructions
This guide provides step-by-step instructions for fitting the NYHAMN sofa-bed cover.
Getting Started
Before you begin, ensure you have the correct sofa-bed and cover. The instructions show a person assembling the cover, with a thought bubble indicating a question mark, followed by an image of a person holding the cover and an IKEA product.
Step 1: Initial Cover Placement
Place the cover over the sofa-bed. The illustration shows a person starting to drape the cover over the backrest of the sofa-bed. An inset detail highlights a specific corner of the cover being aligned.
The image shows a person's hand pointing to a specific area on the sofa-bed where the cover should be aligned.
Step 2: Adjusting the Cover
Continue to pull the cover down and adjust it around the sofa-bed. The illustration shows the person pulling the cover down over the sides and front of the sofa-bed, with an arrow indicating the direction of movement.
Step 3: Final Adjustments and Check
Ensure the cover is smooth and fits snugly. The illustration shows four hands pointing to the corners of the sofa-bed, indicating where to check the fit. An inset shows a close-up of a corner, with one image showing a proper fit and the other showing an incorrect fit marked with a cross.
Important Note: Ensure the cover is correctly fitted to all corners for a neat appearance.
