All Security Equipment | Automatic Gate Openers | Parking Systems
User Manual for ALL Security Equipment models including: Surface Mount Single 1200LSDM Magnetic Lock, Surface Mount Single Lock, Magnetic Lock, 1200LSDM Magnetic Lock, 1200LSDM
Surface Mount Single Magnetic Lock 1200LSDM | All Security Equipment
File Info : application/pdf, 5 Pages, 2.28MB
DocumentDocumentFAS-HUL1200LSDM Magnetic Lock Manual
I-----------------------------------------------------------------
1
I
I I I
Magnetic Lock 1200 lbs.
Specification
Model
Size(mm)
Voltag e
Current
Holdlng Force LockSlgnal DoorSlgnal Time
Door
Single door magnetic lock
DC12V(Default); 260Lx54.7Wx29.6H DC24V(Order)
12V/500mA±10% 24V/250mA±10%
Single door magnetic lock
DC12V(Default);
with signal
260Lx54.7Wx29.6H DC24V(Order)
12V/500mA±10% 24V/250mA±10%
Single door magnetic lock with time delay
260Lx54. 7Wx29.6H
DC12V(Default); DC24V(Order)
12V/500mA±10% 24V/250mA±10%
Single door magnetic lock with bond sensor
260Lx54. 7Wx29.6H
DC12V(Default); DC24V(Order)
12V/500mA±10% 24V/250mA±10%
Double door magnetic lock
520Lx54. 7Wx29.6H
DC12V(Default); DC24V(Order)
12V/S00mA±10%x2 24V/250mA±10%x2
Double door magnetic lock with signal
520Lx54. 7Wx29.6H
DC12V(Default); DC24V(Order)
12V/S00mA±10%x2 24V/250mA±10%x2
Double door magnetic lock with time delay
520Lx54. 7Wx29.6H
DC12V(Default); DC24V(Order)
12V/S00mA±10%x2 24V/250mA±10%x2
Double door magnetic lock with bond sensor
520Lx54. 7Wx29.6H
DC12V(Default); DC24V(Order)
12V/S00mA±10%x2 24V/250mA±10%x2
350kg(800Lbs) 350kg(800Lbs) 350kg(800Lbs) 350kg(800Lbs) 350kgx2(800Lbsx2) 350kgx2(800Lbsx2) 350kgx2(800Lbsx2) 350kgx2(800Lbsx2)
NO NO/NC/COM NO/NC/COM NO/NC/COM
NO NO/NC/COM NO/NC/COM NO/NC/COM
NO NO NO NO/NC/COM NO NO NO NO/NC/COM
No
Single Door
No
Single Door
0/3/6/9sec. Single Door
No
Single Door
No
Double Door
No
Double Door
0/3/6/9sec. Double Door
No
Double Door
Diag ramcunit:mm>
0
0 0
0
26500 II
265.00
ao;
@
ao;
II
@
Ill
Ill
Single Door Magnetic Lock with Signal & Time delay
265.00
lI I: 11 Single door magneticlock
0
ii
ii
----------------------------------------------------S-in-g-le-D-oo-r M-a-g-ne-ti-c -Lo-ck-w-it-h -LE-D-&-B-on-d-S-en-s-or-------------------
530 00
4100 0
I;I'
I
l:FJ
Double door magnetic lock
0
0 0
0 0
00
0 0 0
0
00
0 0
0 0
530 00
Ill
1;I' Ill
Ill
Ill
1
l:FJ
Il
Ill
Ill
Double Door Magnetic Lock with Signal & Time delay
0
Ill
Ill
Ill
0 01:F)O 0
530 00
Ill
1;I'
1Ill
@
l:FJ
l:FJ Ill
Il
Ill
Ill
Ill
Ill l:FJ
l:FJ Ill
Ill
Double Door Magnetic Lock with LED & Bond Sensor
www.AllSecurityEquipment.com
2
3
Template
Door Frame
Fold the plate to 90 ° .
Door leaf I Template
Template
Close the door first, then place the upper side of template on door frame, while adjust the left side next to the door leaf.
Door leaf
Mark screw positions of armature plate and magnetic lock on door leaf and door frame respectively.
4
5
6
7
Door leaf Drill holes based on the marked positions.
Make a combination based on the picture.
Strike the pin into the armature plate slightly (to avoid movement).
Make a combination based on the picture(add washer accordingly). Therubberring must be added.
()
Place the rubber ring between armature plate and door leaf.
9
./·····-····,.,
(,,/ ....._________Jllen Key Use Allen key to remove the mounting plate from lock body.
10
11
Jl
Fix the mounting plate on the door frame according to the holes drilled earlier.
,.-
/,, ·········...... ( )Allen Key
\/_/ ·-...........-
Use Allen key to screw the lock body on the mounting plate.
12
13
Hollow Metal Door
Wooden Door
Close the door to test holding force. The angle between armature plate and magnetic lock can be adjusted by adding or reducing washers.
After all the appropriate procedures, the holding force can be maximized. Finally, fix the tamper screw.
I I 16mm 8mm
Drill a hole Inside: Diameter is 8mm Outside: Diameter is16mm
36mm
I I
12.7mm
8mm
Drill a hole Inside: Diameter is 8mm Outside: Diameter is 12.7mm
Metal Surface Door
11 I
6.8mm for M8-1.25thread
lnside:Drill a hole diameter is 8mm folding the plastic straight pin
A Notice:
Thickness of Door Leaf:
350LBS: 44mm 600LBS: 50mm
800LBS: 48mm
1200LBS: 46mm
A. The screw of armature plate should not be fixed too tight. Proper elasticity should be guaranteed for the rubber ring so that the armature plate can adjustitself to the appropriate position.
B. Check the jumper's position beforeconnecting. Figure out it represents 12VDC or 24VDC.
www.AllSecurityEquipment.com
. Bracket Installation
Different brackets are available according to different types of doors. For example, narrow door, frameless glass door and inward opening door.
L Bracket When the door frame thickness is less than 42mm, L bracket is needed.
Single Door Magnetic Lock Bracket
LC Bracket LC Bracket one-piece design,wires are mortised.no damage ori wires
Double Door Magnetic Lock Bracket
Single Door Magnetic Lock Bracket
ZL Bracket If install a bracket on inward opening door,ZL bracket is needed
Double Door Magnetic Lock Bracket
Single Door Magnetic Lock Bracket
Double Door Magnetic Lock Bracket
ZLC Bracket Hidden-line Design of bracket for single door magnetic lock,one-piece design,durable,easy installation
Single Door Magnetic Lock Bracket
Double Door Magnetic Lock Bracket
GZ Bracket
Attention:No GZ bracket for S00kgs series available currently.
One-piece design, durable&professional design, easy installation, suitable for 10-1 Smm frameless glass door.
Single Door Magnetic Lock Bracket
U Bracket If door leaf is glass.need U bracket to be used with lock (suitable for 10-12mm glass door)
Double Door Magnetic Lock Bracket
Installation of Armature Plate If door leaf is too thick.need to choose I bracket
Single Door Magnetic Lock Bracket
www.AllSecurityEquipment.com
Double Door Magnetic Lock Bracket
Circuit Board Diagram
A.12VDC Input: Connect the positive(+)lead from a 12VDC power source to V +. Connect the ground(-)lead from a 12VDC power source to V -. Check jumper for 12 VDC operation.
B.24VDC Input: Connect the positive(+}lead from a 24VDC power source to V +. Connect the ground(-)lead from a 24VDC power source to V -. Check jumper for 24 VDC operation.
Wiring Instruction of S ingle Door Magnetic Lock
Door Sensor
12/24V
l<ID <IDI DC 12V
IO CID OI DC 24V
101010101 JP1
Red -- NC
Yellow
COM
Black -- NO
Model with DS will come with one more set of signal for door sensor
Lock signal{NO, NC,COM)
DC 12/24V
and lock status(NO/NC/COM contact)
w w -- [g] [g] OS 3S 6S 9S
Standard magnetic lock No signal output
Model with Twill come with this function
Wiring Instruction of Double Door Magnetic Lock
Connection: green wire or white plug, except the models without LED indicator and signal output; only when it detects that double doors have been locked, there will be normal signal output.
12/24V
l<ID <IDI DC 12V I0 <ID 0I DC 24V
101001 01 1
JP1'
------------------------,
NO COM
Green: White:
Lock signal{NO, NC,COM)
· - - -N- -C- - - - - - -0- - - - - -Y-e-ll-o-w- :·
V-
Black
V+
Red
DC 12/24V
Standard magnetic lock No signal output
0 NO 0 COM 0 NC 0 V0 V+
0000
JP1
Wire Connection
AL ARM SYSTEM :
ACCESS CON TROL
EB EB EB EB EB EB EB EB EB EB EB
H N.C L
N .O
N .O
+
N.C COM N .O
TAMPER EG G N D DOORBELL 12\/DC
OUTPUT
I l
N
·
C
·
: I
HIGH POTENTIAL LOW POTENTIAL
I
I
24 HOUR N.C
:
--P-RO-T-E-C-T-IO-N-Z-O-NE--I1
RELEASE BUTTON (INSIDE THE HOUSE)
Ll'.J,,169N.- O. ---+--.
ELECTROMAGNETIC LOCK
+
POWER SUPPLY
000000
Push
+ G N D N .C G N D N.O
1 2V
OUTPUT 1
N .C
www.AllSecurityEquipment.com