V100S Smart Band Quick Guide
1. Getting Started
1.1 Charge the device ⚡
Connect the magnetic charging cable to the back of the smart band and plug the USB end into a compatible USB power adapter or port.
[Diagram Description: The smart band is shown with its charging cable magnetically attached to the rear sensor area. The USB end of the cable is inserted into a standard USB power source.]
1.2 Wear the device ⌚
Wear the smart band snugly on your wrist, about one finger's width above your wrist bone. Ensure the sensor on the back is in contact with your skin for accurate readings.
[Diagram Description: An illustration shows the smart band worn on a wrist, positioned correctly above the wrist bone with the underside sensor making contact with the skin.]
2. Basic Functions
2.1 Touch operation ?
The V100S Smart Band features a touch screen for navigation. Swipe up to view notifications, swipe down for quick settings, and swipe left or right to cycle through different screens or widgets.
[Diagram Description: Visuals demonstrating swipe gestures: a finger swiping up on the screen, down, left, and right, with corresponding icons for notifications, settings, and menu navigation.]
2.2 Switch watch faces
Press and hold the current watch face to enter the watch face selection screen. Swipe left or right to choose a new watch face and tap to confirm.
2.3 View notifications
Swipe up from the bottom of the watch face to view incoming calls, messages, and app alerts. You may need to pair the device with your smartphone via the companion app.
2.4 Check heart rate ❤️
Navigate to the Heart Rate app on the band and tap to start a measurement. For continuous monitoring, enable the setting in the companion app.
2.5 Measure blood oxygen ?
Access the Blood Oxygen app and follow the on-screen prompts to start a measurement. Remain still during the process for accurate results.
2.6 Measure blood pressure ?
Locate and open the Blood Pressure app. Follow the instructions to take a reading. Ensure the band is worn correctly and you are in a relaxed state.
[Note: This feature's inclusion is based on the document's metadata indicating blood pressure description was added.]
2.7 Sleep tracking ?
Wear the band while sleeping to automatically track your sleep duration and quality, including light, deep, and REM sleep stages.
2.8 Activity tracking ?
The band automatically tracks your daily steps, distance covered, and calories burned. You can also manually start specific workout modes.
2.9 Find phone ?
If your phone is within Bluetooth range and connected, you can use the 'Find Phone' feature on the band to make your phone ring.
2.10 Music control ?
Control music playback on your connected smartphone directly from your wrist, including play, pause, skip track, and volume adjustment.
2.11 Timer ⏱️
Set countdown timers for various activities.
2.12 Stopwatch ⏳
Use the stopwatch function to measure elapsed time.
2.13 Alarm ⏰
Set and manage alarms directly on the device.
2.14 Weather ☁️
View current weather conditions and forecasts for your location (requires smartphone connection and location services).
2.15 Settings ⚙️
Access various settings such as display brightness, vibration intensity, do not disturb mode, and system updates.
3. Important Information
3.1 Safety Information ⚠️
This device is not a medical device and should not be used to diagnose, treat, cure, or prevent any disease. Consult a healthcare professional for any health concerns. Avoid exposing the device to extreme temperatures or water beyond its specified rating.
3.2 Regulatory Information ⚖️
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
3.3 Warranty Information ?
Please refer to the separate warranty card or the manufacturer's website for detailed warranty terms and conditions.
