Pocket Hole Jig Kit
Product Introduction
Product Overview
This document provides a detailed introduction to the Pocket Hole Jig Kit, a woodworking tool designed for creating precise pocket holes.
Product Accessories
- 1. Bit, with ring*1
- 2. Bit, without ring*1
- 3. Product body*1
- 4. Screws*10
- 5. Plug*10
- 6. Wrench*1
- 7. For approval*1
Product Structure
The pocket hole jig features several key components:
- Wrench
- Drill sleeve locking screw
- Slag discharge slot
- Height adjusting screw
- Plastic plug
- Oblique hole self tapping screw
- English scale
- Metric scale
- Φ9MM drill sleeve
- High strength plastic washer
- Press plate screws
- Limit ring
- Electric screwdriver
- Φ9MM drill bit
A visual representation of the product structure is provided, detailing the placement and function of each part.
Product Dimensions
Height: 3.858in (98MM)
Width: 3.15in (80MM)
Length: 5.197in (132MM)
Clamping range: 1.575in (40MM)
Drill Sleeve Diameter: Φ0.354in (Φ9MM)
Side Height: 2.56in (65MM)
Detailed measurements are provided for accurate understanding of the jig's size and capacity.
Specification
- Hole Angle: 15°
- Material: Aluminum Alloy
- Drill Sleeve Material: Steel
- Drill Bit Material: High Speed Steel
- Suitable Plank Thickness: 0.47"-1.77" (12-45mm)
Package List:
- Pocket Hole Jig x 1
- Drill bit x 2
- Screwdriver x 1
- Pocket Hole Screws x 10
- Star Screw x 1
- Pocket Hole Plugs x 10
- Limit Ring x 1
Installation Steps
- Take out the product.
- Loosen the screw press.
- Adjust the height as required.
- Position the drill point on the floor in front of the raised edge, approximately 1 mm, and lock the adjusting ring.
- Place the jig onto the wood and engage the screw press.
- Insert the drill bit into the drill tools and lock it to begin the drilling operation.
Follow these steps carefully for proper installation and use of the pocket hole jig.