Instruction Manual for clarion models including: GV-F200 G05, GV-F200, GV-F200 Car Multimedia, GV-F200, Car Multimedia, Multimedia
FRAME FORD KA 2017 – Clarion Car Multimedia
GL-700 (XD8581-2325) 2 32GB, 9inch – Clarion Car Multimedia
Install the rear camera in the rear of car. Notice the lens direction when installing. Wiring can be laid along the roof of car. After.
File Info : application/pdf, 1 Pages, 1.58MB
DocumentDocumentGV-F200 CARING FOR THE FUTURE OF CUSTOMERS AND BUILDING A GLOBAL BRAND SECURITY INFORMATION Note: Read the following impo ant safety information carefully before use. 1.Do not disassemble or repair this product without permission, this may damage the dash camera and cause electric shock nally break down the product warranty. 2.The dash camera should be kept away from being exposed to open ames or placed in humid and dusty environment for a long time, which may cause explosion or electric leakage even leading to re. 3.Considering the local law and safe driving requirement, please do not manually operate the dash camera while driving. 4.Do not drop or impact this product, it may easily cause damage of the internal components. 5.For the sake of safety in accident, this product and its accessories should be kept away from the place children or animals can easily get. 6.Do not leave this product in high temperature for a long time like exposure to the sun, which may cause damage of the shell and internal components. It is recommended to use it at temperature of -20 to 70. 7.It is normal for the dash cam causing the temperature rising after being used for a period of time. 8.Clarion is not responsible for any loss or revision of data and content in the device, Once user sta using this product it means he have agreed to this statement. INSTALLATION INSTRUCTIONS 1.Turn o the car engine. 2.Inse the TF card into the recorder card slot. (Notice the TF card should be high speed /class10 or above, of which capacity shall be more than 8GB, up to 128GB suppo ed.) 3.Fix the recorder on the original central rea iew mirror. 4.Inse the car charger into car cigarette lighter po . 5.Connect the power connector of recorder to the car charger by charging extension cable. (Note that the charging extension cable can be hidden laid along the edge of windshield when wiring.) 6.Install the rear camera in the rear of car. Notice the lens direction when installing. Wiring can be laid along the roof of car. After installation plug the rear terminal into the po AV-IN. 7.Adjust the lens position to make sure that the lens is level with ground. 8.Sta the engine, check if the recorder has been installed correctly. (Note: After ACC ON, if the recorder is installed OK the device comes into recording state and the video indicator ashes. Then pay attention to checking if the display view on screen is normal, please contact us once you nd any abnormal.) ICON DESCRIPTION 1 Power Switch quick press to light on/off the screen, long press to turn on /off the model 2 Type-C power socket Connect to car for power 3 AV-IN Rearview video input 4 TF Card Slot For inserting the sd memory card, the tf card should Be format under FAT32 before use 5 Video Icon Touch to start recording or pause recording 6 Lock Data Indicates the current video file would be saved and locked 7 On Sound Recording When the voice is recorded the icon display simultaneously. Sound Recording When the sound recording stops the icon display 8 Stopped Simultaneously 9 SD Card Inserted Indicates the sd card is inserted well in the device. 10 SD Card Not Found Indicates the sd card is removed or not recognized by device 11 Touch-tone Indicates touch on device would give out sound(feedback on). PRODUCT SPECIFICATIONS Product Name Product Model Product version Screen Lens Video Format Lmage Format Memory Card Support Operating Voltage Driving Video Recorder GV-F200 G05 9.66 inches F1.8 TS JPG Memo card--- TF card, maximum 128GB suppo ed 1. Multi-languagesl 2. Built-in audio 12~24V MOBILE CONNECTION 1.Take your phone to scan the below QR code or search 'wind recorder' in APP store, download and install the application. 2.Make sure the recorder in car is on. (Buit-in WiFi would be automatically turned on when the recorder is on) 3.Search for WiFi on your phone then connect. WiFi name: GVF200****, Password: 12345678 to set up connection. OPERATING INSTRUCTIONS MAIN OPERATING INTERFACE INTRODUCTION 1 2 3 456789 Without manual touch the buttons on inte ace would be hidden after 5seconds above display, and touch the screen (anywhere) to display the buttons again. 1.Recording status, recording timer, recording resolution display. 2.System date and time display, 3.Status bar, similar to phone setting, it display the icon when corresponding function is activated or o . 4.Home button for entering the main menu inte ace. 5.Button for switching video recording on/ o . 6.Button for snapshot in the video 7.Button for switching sound recording on/ o 8.Button for locking down the current video data 9.Button for switching the front/rear camera view MAIN MENU INTERFACE Dash cam: Touch to enter the operating page. Sma drive: Touch to enter the intelligent driving setting page. File explorer: Touch to enter the page managing all the saved videos, photos from front / rear cameras. Camera setting: Touch to enter the dash camera function setting page. Sys setting: Touch to enter the page adjusting system setting. INTELLIGENT DRIVING SETTING 1 2 3 4 5 6 7 8 9 10 11 12 1.Button for back to main inte ace 2.Button for manually adjusting the ADAS(advanced driving assistance system) 3.Switch for warning trigger in ADAS 4.Button for setting the warning trigger in ADAS 5.Switch for automatic adjustment for ADAS by device 6.Button for manually adjusting the rear blind spot 7.Switch for warning trigger in rear blind spot 8.Button for setting the warning trigger in rear blind spot 9.Switch for automatic adjustment for lane change assist by device 10.Button for manually adjusting the lane change assist area 11.Switch for warning trigger of lane change assist 12.Button for setting the warning trigger of lane change assist Note: If user sets the recording resolution as 4K then turn on the BSD(blind spot detection) and LCA(lane change assist) function, the resolution would switch to 2.5K automatically; If user turn on the BSD and LCA at rst then set the recording resolution as 4K, the BSD and LCA would be turned o automatically. FILE EXPLORER Touch the FRONT to view the recorded data from dash camera Touch the BACK to view the recorded data from rear camera Touch the VIDEO to view the unlocked saved videos from camera Touch the VIDEO-LOCK to view the locked videos in le Touch the IMAGE to view the snapshot by manual operation Touch the to view the relevant video on the screen Touch the to lock the relevant video (keep the data from covering by new data--SD card volume limit) Touch the to delete the data from device DASH CAMERA SETTING In this page user can pick up the options customized, like recording resolution, video circular saving duration, emergency video sensitivity setting and other options around the dash camera. SYSTEM SETTING In this page user can adjust the system setting as language, time zone, speed type and other system setting options. LEGAL NOTICE 1. Before installing and using the product, please carefully read this document, especially the relevant safety tips. Please keep this document safe for future reference. 2. The illustrations and functional descriptions in this document are provided for illustrative purposes only and are for reference only. The actual product shall prevail. Some of the components, functions, and features mentioned in this document are for illustrative purposes only and may only be applicable to ce ain speci c models of products. Unless speci ed by other statement, any contents in this document is not a description of the speci c speci cations and con gurations of the product. If you need to know the product speci cations and con gurations, please refer to the relevant speci cation documents of this product or consult the product seller for fu her study. 3. Products, applications, and content may be updated from time to time, and their actual situation may di er from this a icle. 4. The nominal storage capacity only represents speci cations, and the actual available capacity for users is lower than the nominal value. The mentioned technical pe ormance indexes are measured based on speci c environments, and the indexes data obtained in other operating environments may va due to di erences in settings and environments. 5. Some products (depending on the product description) require network suppo to achieve full functionality and may need to be used in conjunction with sma devices such as sma phones. The mentioned software and Internet se ices are used according to the relevant license and/or se ice agreement. The use of network functions may consume data and incur se ice fees, which will be charged by your network se ice provider according to their standards. 6. Some web-based features of the product may be suppo ed by third-pa y network se ices, including content that is not provided, guaranteed, and suppo ed by the seller, and may be terminated or changed at any time. The use of third-pa y se ices is subject to the third-pa y se ice terms and privacy policies, which may di er from the seller's regulations. Please carefully read these third-pa y terms before using the relevant functions and se ices. Third pa y se ices and their content are not controlled by the seller, and the seller shall not be responsible for them. 7. If you use the software, peripherals, or components provided from this product on other products, or use software, peripherals, or components that are not recommended or allowed by this product speci cation le (other resource) on this product, you shall be responsible for their compatibility, reliability, and legality on your own. 8. Nothing in this document constitutes a modi cation of the seller's product warranty policy. 9. This product is not designed for organ transplantation or other life suppo system applications, and any malfunction in such applications may result in personal inju or death. 10. The pa s of this document belonging to the licensor (if any) are used under authorization. Without prior written authorization from the seller, no one is allowed to copy, transcribe, delete or compile all or any pa of this document in any way, or conve them into machine-readable format in any way, or stored in any form in a retrievable system, transmitted over wired or wireless networks, or translated into any text in any form.