EMOS ZM5171, ZM5172, ZM5173, ZM5181, ZM5182, ZM5183 LED Panel Surface Mounted

This document provides comprehensive information for the EMOS LED Panel Surface Mounted series, including installation, features, specifications, and operation.

Product Overview

The EMOS LED Panel Surface Mounted lights are designed for installation onto a solid base in indoor areas. They offer various features including dimming, adjustable color temperature (CCT), and scene modes, controllable via a remote. The enclosure is rated IP20 for indoor environments.

Available Models: ZM5171, ZM5172, ZM5173, ZM5181, ZM5182, ZM5183.

Brand: EMOS

Website: www.emos.eu

Technical Specifications

Model No.	Input Voltage	Power Consumption	Life Span	Luminous Flux	CRI	IP Rating	Dimensions
ZM5171	220-240 V AC, 50/60 Hz	20 W	30,000 hours	140-1400 lm	>80	IP20	295 x 295 x 52 mm
ZM5172	220-240 V AC, 50/60 Hz	25 W	30,000 hours	210-2100 lm	>80	IP20	295 x 595 x 52 mm
ZM5173	220-240 V AC, 50/60 Hz	40 W	30,000 hours	380-3800 lm	>80	IP20	595 x 595 x 52 mm
ZM5181	220-240 V AC, 50/60 Hz	18 W	30,000 hours	125-1250 lm	>95	IP20	295 x 295 x 61 mm
ZM5182	220-240 V AC, 50/60 Hz	24 W	30,000 hours	190-1900 lm	>95	IP20	295 x 595 x 61 mm
ZM5183	220-240 V AC, 50/60 Hz	36 W	30,000 hours	305-3050 lm	>95	IP20	595 x 595 x 61 mm

Installation and Mounting

The LED light fitting is designed for fixed mounting onto a solid base (e.g., wall, ceiling) in indoor areas.

Diagram 1: Illustrates attaching the luminaire to a surface using screws and connecting the power cord.

Diagram 2: Shows the rear of the luminaire with electrical connection terminals and mounting points.

Diagram 3: Depicts sliding the luminaire into a mounting bracket or frame.

Diagram 4: Shows the fully installed luminaire.

Steps:

Firmly mount the luminaire to a solid surface.
Connect the power cord to the 230 V~ mains supply.
Important: The connecting conductor must NOT be connected to the mains during installation. This operation must be performed by an authorized person.
Wiring: Neutral wire (N) is blue, Live wire (L) is brown.

Remote Control and Operation

Remote Control Diagram: Features numbered buttons (1-11), directional buttons (A, B, C, D), an 'ALL' button for controlling all lights, a numeric keypad (0-9), and 'ID' and 'S' buttons for pairing and group settings.

Key Features:

Turn On/Off Light: Basic power control.
4-Step CCT Adjusting: Select from four predefined color temperatures.
4-Step Dimming: Adjust brightness in four steps.
Scene Modes: Pre-set lighting scenarios:
- Scene A: 10% Brightness, 2700K
- Scene B: 30% Brightness, 4000K
- Scene C: 50% Brightness, 5000K
- Scene D: 100% Brightness, 6000K
Step-less CCT Adjusting: Smooth adjustment of color temperature.
Step-less Dimming: Smooth adjustment of brightness.
All Control: Control all paired luminaires simultaneously.
ID Keys: Set individual panel IDs from 0 to 99 for group control.

Pairing and Control

Pairing Luminaires:

1. Single Group Pairing:

Turn on the luminaire.
Within 10 seconds, press any number from 0-99, then press the 'ID' button.
Repeat step (b) to confirm. The luminaire will blink once to indicate successful pairing.

Note: One remote can control up to 100 groups of luminaires, with no limit on the number of luminaires per group.

2. Non-Group Pairing:

Turn on the luminaire(s).
Within 10 seconds, press the specific pairing buttons (refer to diagram, likely the '11' button or similar). The luminaire will blink once to confirm.

Controlling Luminaires:

1. Single Group Control: Press the luminaire's ID number, then press the desired function button.

2. All Control: Press the 'ALL' button, then press the desired function buttons.

Warnings and Safety Information

The luminaire is suitable exclusively for fixed mounting.
Connect only to an electrical network whose installation and protection comply with applicable standards.
Always disconnect the luminaire from the AC power supply before any manipulation, servicing, or maintenance. This must be performed by a qualified person.
Do not use the luminaire if any part is damaged.
LED chips inside the luminaire are not replaceable.
Do not alter the internal wiring of the luminaire.
Protection against dangerous contact voltage is ensured by proper earthing.

Disposal: Do not dispose of electrical appliances with unsorted household waste. Use designated collection points for sorted waste. Contact local authorities for information on collection points. Improper disposal can lead to hazardous substances entering groundwater and the food chain, harming human health.

Energy Efficiency

ZM5171, ZM5172, ZM5173: Energy efficiency class F

ZM5181, ZM5182, ZM5183: Energy efficiency class G

Warranty and Declaration of Conformity

EMOS spol. s r.o. declares that these LED Panel Surface Mounted products comply with the essential requirements and other relevant provisions of the applicable EU directives. The device can be freely operated within the EU. The Declaration of Conformity can be found on the EMOS website: http://www.emos.eu/download.

The warranty period is 36 months from the date of delivery. Warranty service covers factory defects in material or workmanship. The warranty does not cover damage caused by improper installation, unauthorized service, modification, or failure to follow instructions. Normal wear and tear, or damage from misuse or overload, are also excluded.

	EMOS LED Panel Lights: Specifications, Installation, and Safety Guide Comprehensive guide to EMOS ZM series LED panel lights, covering technical specifications, installation instructions, safety warnings, energy efficiency, disposal, and warranty information for surface-mounted round and square luminaires.
	EMOS ZS2452, ZS2462, ZS2472 LED Floodlight User Manual and Specifications Detailed user manual and technical specifications for EMOS ZS2452, ZS2462, and ZS2472 LED floodlights, covering installation, maintenance, safety, and product details.
	EMOS LED Panels: Recessed & Built-in Lighting - Specifications, Installation, and Warranty Comprehensive guide to EMOS LED panels, including recessed and built-in models (ZD11xx and ZD21xx series). Features detailed specifications, installation instructions, safety warnings, energy efficiency information, and warranty details for indoor lighting applications.
	EU Declaration of Conformity - EMOS LED Panel ZB1524 Official EU Declaration of Conformity for the EMOS ZB1524 LED Panel, confirming compliance with relevant EU directives and harmonized standards.
	EMOS D5AC25 Christmas LED Lights - EU Declaration of Conformity Official EU Declaration of Conformity for EMOS D5AC25 Christmas LED Lights, confirming adherence to European Union directives and harmonized standards by manufacturer EMOS spol. s r.o.
	EMOS D3AM03 (ZY1920T) EU Declaration of Conformity - Christmas LED Lights Official EU Declaration of Conformity for the EMOS D3AM03 (ZY1920T) Christmas LED Lights, confirming compliance with relevant EU directives and harmonized standards.
	EMOS EU Declaration of Conformity - Christmas LED Lights (D3AW02) Official EU Declaration of Conformity from EMOS for the D3AW02 Christmas LED Lights, confirming compliance with relevant EU directives and harmonized standards.
	EMOS D3AW04 Christmas LED Lights - EU Declaration of Conformity This document consolidates the EU Declaration of Conformity for EMOS D3AW04 Christmas LED Lights, confirming compliance with relevant EU directives and harmonized standards.