L Series Lab Fittings LGF3-A22I-30
Chicago Faucets
Product Type
Deck-mounted laboratory turret with fine needle valve
Features & Specifications
- Laboratory 30-degree angled nozzle with 10 serrations for laboratory hose
- Vandal Proof 2-1/2" cross handle
Performance Specification
Rated Operating Pressure: 7.25 PSI max.
Warranty
- 5-Year Limited Faucet Warranty
- Lifetime Limited Faucet Warranty
- 1-Year Limited Finish Warranty
- 5-Year Limited Mechanical Warranty
Codes & Standards
ANSI Z21.15b/CSA 9.1b
Architect/Engineer Specification
Chicago Faucets No. LGF3-A22I-30 Deck-mounted laboratory turret with fine needle valve, polished chrome finish. Laboratory 30-degree angled nozzle with 10 serrations for laboratory hose. 2-1/2" cross handle, black nylon. Laboratory index button, pink with black letter, H (Hydrogen).
Diagram Description:
Top View Diagram: Shows a deck-mounted laboratory turret fitting. Key dimensions include an overall height of 3-1/4 inches (83mm), maximum ware thickness of 2-3/8 inches (60mm), and an overall width of 5-1/2 inches (140mm). The fitting features a 30-degree angled nozzle with 10 serrations, a 2-1/2 inch (64mm) cross handle made of black nylon, and a base approximately 1-5/8 inches (41mm) in diameter. It includes a 3/8" NPT male inlet connection and a threaded port measuring 8-32 UNC x 1/4 deep female thread.
Side View Diagram: Illustrates the side profile of the laboratory turret. It shows the 30-degree angled nozzle with serrations, the cross handle, and the base. The inlet connection is specified as a 3/8" NPT male inlet. The diagram also indicates dimensions for the nozzle angle and overall length, with a measurement of 5-1/2 inches (140mm) for the overall length.
Operation and Maintenance
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance, refer to the installation instructions and repair parts documents located at www.chicagofaucets.com.
Chicago Faucets, a member of the Geberit Group, is a leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports, and sport facilities. For installation or other technical assistance, call 1.800.TECTRUE or 1.847.803.5000 Option 1.
